• 제목/요약/키워드: PC Project

검색결과 147건 처리시간 0.046초

가속기 제어시스템의 성능향상을 위한 연구 (Conceptual Design of PLS-II Control System for PLS)

  • 윤종철;이진원;이은희;하기만;김재명;박성주;김경렬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1658_1659
    • /
    • 2009
  • PLS(Pohang Light Source) will begin the PLS-II project that has been funded by the KOREA Government in order to further upgrade the PLS which has operated since 1992. The control system of the PLS-II has distributed control architecture, with two layers of hierarchy; operator interface computer (OIC) layer and machine interface computer (MIC) layer. The OIC layer is based on SUN workstation with UNIX. A number of PC-based consoles allow to remotely operating the machine from the control room. PC-based consoles use the Linux or Windows operation system. Similar consoles in the experimental hall are used to control experiments. The MIC layer is directly interfaced to individual machine devices for low-level data acquisition and control. MIC layer is based on VMEbus standard with vxWorks real-time operating system. Executable application software modules are downloaded from host computers at the system start-up time. The MIC's and host computers are linked through Ethernet network. It should enable the use of hardware and software already developed for specific light source requirements. The core of the EPICS (Experimental Physics and Industrial Control System)[1] has been chosen as the basis for the control system software.

  • PDF

Front-Jacking공법에 의한 대전역사 하부 관통사례 (A case study on perforation under Daejeon station building by Front-Jacking method)

  • 김용일;황낙연;정두석;차종휘;이내용
    • 한국암반공학회:학술대회논문집
    • /
    • 한국암반공학회 2006년도 춘계학술발표회 논문집
    • /
    • pp.195-203
    • /
    • 2006
  • 철도지하횡단공사는 횡단구조물 축조시 개착식과 비개착식 공법으로 구별되는데 개착식 공법은 열차의 비운행시간을 고려하여 시공하는 극히 제한적인 공법인데 반하여 비개착식은 열차의 속도 및 운행시간에 제약을 받지 않는 특징을 갖고 있으며 안전하고 신속한 시공의 장점을 갖고 있다. 비개착식 공법 중 Front Jacking 공법은 소구경의 강관을 압입하여 구조물과의 마찰력과 토압을 최소화시킨 후 현장에서 제작한 전단면 Precast Box 선단부에 PC강연선과 유압Jack을 이용하여 박스를 지중에 견인하는 공법으로 시공시 안정성과 열차의 정시성 확보가 유리하여 많이 적용되고 있다. 이 공법은 박스단면의 크기 및 연장, 지반조건에 관계없이 시공가능하며 친환경적인 시공을 할 수 있다. 본 고에서는 Front Jacking 공법이 적용된 대전동서관통대로의 철도횡단 시공사례를 소개하고자 한다.

  • PDF

의료기기 통합 게이트웨이와 EMR 시스템간의 연동을 위한 메시지 규격 설계 및 서버 구현 (Design and Implementation of Message Format and Server for Interworking EMR System and Gateway of Medical Devices)

  • 임석진;황희정
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권6호
    • /
    • pp.255-262
    • /
    • 2013
  • 다양한 병원 정보 시스템 환경에서 서로 다른 인터페이스 규격을 가지는 의료기기들을 통합하기 위한 의료기기 통합 게이트웨이(MG, Medical Gateway)는 하나의 장비로 여러 의료기기들을 인터페이스 할 수 있기 때문에 기존의 PC를 게이트웨이로 사용하는 환경에 비해 관리의 효율성과 비용적인 측면에서도 많은 이득을 제공하고 있다. 그러나 MG를 통해 여러 의료기기들을 통합 한다 하더라도 데이터를 EMR 시스템과 연동하기 위해서는 각 병원시스템과 DB 구성에 따라 개별적인 프로그램이나 추가적인 시스템 도입이 필요하게 된다. 본 논문에서는 이러한 MG와 EMR 시스템간의 연동을 위한 표준기반의 메시지 규격을 설계하고 설계된 메시지를 처리할 수 있는 서버를 구현한다. 본 논문에서 제안한 메시지 규격과 서버는 환경이 서로 다른 병원에서도 MG와의 데이터 교환이 용이하게 하여 디지털병원 수출 프로젝트와 같은 국내의 선진 병원 구축 기술과 IT 기술을 해외에 수출하는 국가적인 프로젝트에 기여할 수 있다.

Constructability Analysis of Green Columns at the Low Bending Moment Zone

  • Lee, Sung-Ho;Park, Jun-Young;Lim, Chae-Yeon;Kim, Sun-Kuk
    • Journal of Construction Engineering and Project Management
    • /
    • 제3권4호
    • /
    • pp.12-19
    • /
    • 2013
  • Green Frame is an environmentally friendly column-beam system composed of composite PC members that can increase buildings' life spans while reducing resource consumption. Typically, connections of PC and RC columns occur at the boundaries of each floor, which is at the upper section of slabs, causing the boundary of each floor to generate the maximum moment. Although it is not optimal in terms of structural safety to connect members at a location where the moment is high, this approach is highly adopted due to its constructability. We propose that a superior approach that employs the concept of connecting columns at the low bending moment zone can be applied to quickly and safely install green columns, the main structural members of Green Frame. Connection of green columns at the low bending moment zone can be classified into three techniques, depending on the method of reinforcing the joints, which have different connection characteristics and construction methods. Research is needed to compare the features of each method of reinforcing the joints so that the most appropriate column connection method can be chosen for the site conditions. This study aims to confirm the structural safety of the connection component at the low bending moment zone and to compare and analyze the construction duration, unit price, quality and safety performance of each column connection method. The study results are anticipated to activate the use of composite precast concrete and to be used as development data in the future.

주성분분석을 이용한 환경영향평가와 사후환경조사의 비교 및 평가에 관한 사례연구 (A Case Study on the Comparison and Assessment between Environmental Impact Assessment and Post-Environmental Investigation Using Principal Component Analysis)

  • 조일형;김용섭;조경덕
    • 한국환경보건학회지
    • /
    • 제31권2호
    • /
    • pp.134-146
    • /
    • 2005
  • Environmental monitoring system has been adopted and supplemented as inspection measures for the quantitative and qualitative changes of environmental impact assessment (EIA). This study compares the results of environmental impact assessment with the results of post-environmental investigation using a correction and principal component analysis (PCA) in the housing development project. Correlation analysis showed that most of air quality variables including TSP, $PM_{10},\;NO_2$, CO were linearly correlated with each other in the environmental impact assessment and the post-environmental investigation. In the water quality, pH and BOD were well correlated with the DO and SS, respectively. As a result of correlation analysis in the noise and vibration, noise in day and night and vibration in day and night were related to each other between EIA and the post-environmental investigation. From the results of analysis of soil, Cu with Cd, Cu with Pb, and Cd with Pb were related to each other in EIA. Principal component analysis (PCA) showed a powerful pattern recognition that had attempted to explain the variance of a large dataset of inter-correlated variable with a smaller set of independent variables (principal components). Principal component (PC1) and principal component (PC2) were obtained with eigenvalues> 1 summing almost $90\%$ of the total variance in the all of the items(air, water, noise, vibration and soil) in EIA and post-environmental investigation.

GPIO를 사용한 RaspberryPi 보드 제어 (RaspberryPi board control with GPIO)

  • 이성진;최철길;최병윤
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 춘계학술대회
    • /
    • pp.429-431
    • /
    • 2014
  • 라즈베리 파이는 영국 라즈베리 파이(Paspberry Pi) 재단에서 만든 초소형/초저가 PC이며 교육용 프로젝트의 일환으로 개발되었다. RCA 연결 잭을 가지고 있으며 2012년 3월에 출시되어 1시간만에 모두 매진되기도 했다. 라즈베리 파이는 리눅스 커널 기반 운영체제를 사용하여 Raspbian이라는 라즈베리 파이에 최적화된 데비안 계열의 무료 운영체제를 주로 사용하고 있다. 현재 라즈베리 파이는 큐비 보드와 함께 IoT 분야에서 상당히 각광받고 있으며 큐비 보드보다 많은 자료를 보유하고 있다. 아두이노는 상당히 쉬운 접근을 허용하지만 avr의 접근성 및 코드 연계등이 불가능하여 모든 커스터마이징을 라이브러리로만 해결해야하는 단점이 존재한다. 라즈베리파이는 라즈비안을 사용하며 가격이 저렴하지만 입출력이 작은 한계점이 존재한다. 그래서 이 둘의 결합을 위해 GPOI를 사용한 하드웨어 제어를 생각하게 되었다. 본 논문에서는 GPIO를 사용한 RaspberryPi 보드를 제어하기 위해 Cooking Hacks 실드를 사용하여 입출력이 부족한 라즈베리 파이 확장을 확인하였고 잘 동작됨을 검증하였다.

  • PDF

학업성취, 교사의 자율성 지지 및 행복의 관계에서 성장 마인드셋의 조절된 매개 모형 (Moderated Mediation Model of Growth Mindset in the Link between Academic Achievement, Teachers' Autonomy Support and Happiness)

  • 매기;이창식
    • 산업진흥연구
    • /
    • 제8권4호
    • /
    • pp.81-89
    • /
    • 2023
  • 본 연구는 학업성취와 행복의 관계에서 교사의 학생에 대한 자율성 지지의 매개효과를 성장 마인드셋이 조절 매개하는지를 검증하여 대학생들의 행복을 높이는 기초자료를 제공하는데 목적이 있다. 조사대상은 광저우의 한 대학에 재학 중인 공대생 중 기업실무 프로젝트를 수행한 396명을 의도적으로 표집하였다. 자료수집은 설문지 방법을 활용하였으며, 수집된 자료는 SPSS PC+ Win. 27.0과 PROCESS macro 4.2.를 이용하여 분석하였다. 적용된 통계기법은 빈도, 신뢰도, 상관관계, 조절된 매개효과분석을 수행하였다. 연구결과는 다음과 같다. 첫째, 학업성취, 교사의 자율성지지, 성장 마인드셋, 행복은 서로 유의미한 정적 상관관계가 있었다. 둘째, 성장 마인드셋은 학업성취가 교사의 자율성 지지를 경유하여 행복에 미치는 영향을 상승시키는 역할을 하였다. 따라서 성장 마인드셋이 학업성취와 행복의 관계에서 교사의 자율성 지지의 매개효과를 높이는 것으로 확인되었다. 연구결과를 토대로 대학생들의 행복을 향상시킬 수 있는 방안을 제언하였다.

Optical Monitoring of Tumors in BALB/c Nude Mice Using Optical Coherence Tomography

  • Song, Hyun-Woo;Lee, Sang-Won;Jung, Myung-Hwan;Kim, Kye Ryung;Yang, Seungkyoung;Park, Jeong Won;Jeong, Min-Sook;Jung, Moon Youn;Kim, Seunghwan
    • Journal of the Optical Society of Korea
    • /
    • 제17권1호
    • /
    • pp.91-96
    • /
    • 2013
  • We report a method for optical monitoring of tumors in an animal model using optical coherence tomography (OCT). In a spectral domain OCT system, a superluminescent diode light source with a full width of 66 nm at half maximum and peak wavelength of 950 nm was used to take images having an axial resolution of 6.8 ${\mu}m$. Cancer cells of PC-3 were cultured and inoculated into the hypodermis of auricle tissues in BALB/c nude mice. We observed tumor formation and growth at the injection region of cancer cells in vivo and obtained the images of tumor mass center and sparse circumferences. On the $5^{th}$ day from an inoculation of cancer cells, histological images of the tumor region using cross-sectional slicing and dye staining of specimens were taken in order to confirm the correlation with the high resolution OCT images. The OCT image of tumor mass compared with normal tissues was analyzed using its A-scan data so as to obtain a tissue attenuation rate which increases according to tumor growth.

Method to Use the Augmented Reality for Construction Planning and Management

  • Nam, Keong-Woo;Kang, Chulung;Jang, Myunghoun
    • 국제학술발표논문집
    • /
    • The 9th International Conference on Construction Engineering and Project Management
    • /
    • pp.1067-1074
    • /
    • 2022
  • An architect creates his/her design to meet owner's requirements. Floor plans, perspective drawings, and scale models are used in order for the owner to choose the design. The tools are a little helpful for communication between the architect and the owner in case the owner does not know architecture. The scale models are good, but it is hard to make scale models while design is in progress. 3D CAD is a good tool for communication, but it is time-consuming and requires high-performance computer hardware. Augmented reality is able to show 3D virtual models that are updated by the architect with smart devices such as a smart phone and a tablet PC. The owner frequently reviews the updated design anytime anywhere. This study proposes a method to use augmented reality for architectural design and construction management. The method supports the communication between the owner, the architect and the contractor to review updated designs, and to complete the building project. 3D models expressed in augmented reality are created using SketchUp with 2D drawings for building construction. An Android application implementing augmented reality is developed by Qualcomm Vuforia and Unity on smart devices. Drawings as markers and 3D models are connected in Unity. And functions that temporarily hide unnecessary parts can be implemented in C# programming language. If an owner, an architect, or a contractor looks at a smart phone on a 2D drawing, he/she can identify building elements such as 3D buildings or columns on a screen. This can help communication between them.

  • PDF

소나무재선충병 방제관제시스템 개발에 관한 연구 (Development of Pine Wilt Disease (Bursaphelenchus Xylophilus) Prevention System)

  • 서봉상;전형섭;김준범;조기성
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2007년도 춘계학술발표회 논문집
    • /
    • pp.283-287
    • /
    • 2007
  • Pine Wilt Disease (Bursaphelenchus Xylophilus) has been attacked since 1988, then it becomes very serious problem of the all over the country. Government has been invested a lot of money to prevent but it is hard to survey the damaged area and ineffectively control the process of prevention. Therefore, this study is focused on development of Pine Wilt Disease (Bursaphelenchus Xylophilus) Prevention System using GIS and GPS through constructiong database of digital map, satellite imagery and attribute data and development component for desktop PC, internet and mobile system to realtime data transmission between project manager and field worker. Especially, we developed the mobile system that can transmit field conditions in realtime using GPS, GIS and CCD camera, the telecommunication control server that transmit received field condition data to web connecting module and system manager, the web system for end user to notify prevention details, the control system lot manager to recognize filed conditions and to control field workers and the wireless telecommunication module to connect in realtime between field and control center.

  • PDF