• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.454-459
• /
• 2017

In this study, a thermal system was designed using a 3-way valve and PTC attached to a solar module. This design could help solve the problem of rising fossil fuel costs caused by limited reserves and environmental problems resulting from fossil fuel use. The thermal system is a hot-air and heating control system composed of a temperature sensor part, mode setting part (for hot air and heating modes), supply part, and thermal system control part. The temperature sensor part has piping and an indoor temperature display, and the temperature setting part has multiple monitoring functions. The mode setting part switches between hot air and heating modes and can be used to set the temperature. The thermal system control part performs functions such as PTC control and temperature setting, PTC day and night and time selection, hot air and heating control, and three-way valve selection. The results verify that the system operates with stable response speeds of $680{\mu}s$ in the temperature sensor part, $700{\mu}s$ in the mode setting part, and $610{\mu}s$ in the thermal system control part.

• Journal of Institute of Convergence Technology
• /
• v.6 no.2
• /
• pp.35-40
• /
• 2016

Ignitor tip is a component of burner to start the burning process in power plant. This is used to ignite the coal to a constant operating state by fuel mixed with air and kerosene. This component is composed of three components so that air and kerosene are mixed in the proper ratio and injected uniformly. Because the parts with the designed shape are manufactured in the machining process, they have to be made of three parts. These parts are designed to have various functions in each part. The mixing part mixes the supplied air and kerosene through the six holes and sends it to the injecting part at the proper ratio. The inject part injects mixed fuel, which is led to have a constant rotational direction in the connecting part, to the burner. And the connecting plate that the mixed fuel could rotate and spray is assembled so that the flame can be injected uniformly. But this part causes problems that are worn by vibration and rotation because it is mechanically assembled between the mixing part and the inject part. In this study, 3D printing method is used to integrate a connecting plate and an inject part to solve this wear problem. The 3D printing method could make this integrated part because the process is carried out layer by layer using a metal powder material. The part manufactured by 3D printing process should perform the post process such as support removal and surface treatment. However, while performing the 3D printing process, the material properties of the metal powders are changed by the laser sintering process. This change in material properties makes the post process difficult. In consideration of these variables, we have studied the optimization of manufacturing process using 3D printing method.

• Journal of architectural history
• /
• v.20 no.3
• /
• pp.7-22
• /
• 2011

With the accumulations of outcomes from archaeological excavations of mountain fortress of three kingdoms period, there have been studies about time-periodic territory range of mountain fortress, difference in the way(method) of construction, defence system and so on from various points of view. This is an empirical study on the construction method of the valley part of stone fortress. First of all, it is required to secure large quantity of fresh water for those who lived at mountain fortress. Especially when builders of fortress construct a fortification at the valley part of stone fortress, in advance they must sufficiently consider several options including the establishment of sustainable water resources. First, when it comes to build a fortification on a ridge[or a slope] of a mountain, you have only to consider a vertical stress. However, when it comes to build a fortification at the valley part of a mountain, You must have more sufficient preparations for the constructing process. Because there are not only a vertical stress but also a horizontal pressure simultaneously. Second, a fortification of mountain fortress built by using unit building stone is a structure of masonry construction like brick construction, and the valley part of it is where the construction of the fortification begins. Third, when it comes to build a fortification at the valley part of a mountain, it seems that they use a temporary method such as coffer dam in oder to prevent the collapse of the fortification due to heavy rain. Furthermore, in response to a horizontal pressure a fortification is built by the way of its plane make an arch, or by piling up the soil with the plate method(類似版築) and earthen wall harder method(敷葉) they increase cross-sectional area of the fortification and its cutoff capacity. In front direction they put the reservoir facility for the fear that the hydraulic pressure and earth pressure are directly transmitted to the fortification. The process of constructing the fortification at the valley part of a mountain is done in the same oder as follows; leveling of ground(整地) ${\Rightarrow}$ construction of coffer dam ${\Rightarrow}$ construction of the fortification between the both banks of the valley ${\Rightarrow}$ construction of the fortification at bottom part of spill way(餘水路) between the both banks of the valley ${\Rightarrow}$ construction of spill way(餘水路) & reservoir facility ${\Rightarrow}$ construction of the fortification at upper part of spill way between the both banks of the valley. Coffer dam facility seems to be not only the protection device on occasion of flood but also an important criterion to measure the proper height of spill way or tailrace(放水路). This study has a meaningful significance in that it empirically examines the method of reduction of the horizontal pressure which the fortification at the valley part of a mountain takes, the date the construction was done, and wether the changes in climate such as heavy rainfall influence the process of construction.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.393-401
• /
• 2016

In the present study, fault attitudes and the locations of appearance of faults in tunnel faces were predicted by analyzing the trajectory of the maximum longitudinal displacement immediately before the appearance of faults through three-dimensional finite element analysis. A total of 28 fault attitude models were used in the analysis. Those faults that have drives with dip appear first in the upper part of tunnel faces as tunnel excavation progresses and their maximum longitudinal displacement shows a tendency to move from the middle part to the upper part of tunnel faces. Those faults that have drives against dip appear first in the lower part of tunnel faces as tunnel excavation progresses and their maximum longitudinal displacement shows a tendency to move from the middle part or middle upper part to the lower part of tunnel faces. In addition, when the dip of faults is larger the maximum longitudinal displacement moves from the left upper part toward the wall part in the case of drive with dip models and from the left lower part toward the wall part in the case of drives against dip models. Therefore, it was indicated that the attitudes of faults distributed ahead of tunnel faces and the locations where faults appear in tunnel faces can be predicted by analyzing the longitudinal displacement trajectory of tunnel faces following excavation.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.555-563
• /
• 2012

Warpage of injection molded product is caused by non-uniform shrinkage during shaping operation and relaxation of residual stress. Robust part design and glass fiber reinforced reins have been adopted to prevent warpage of part. Warpages for part designs have been investigated in this study according to the injection molding conditions. Part design contains flat specimen and two different rib designs in the flat part. Resins used in this study were glass fiber reinforced amorphous plastics, PC and ABS. Different rib designs showed significant differences of warpages in the parts. Various warpages have been observed in the three regions of the part, near gate region, opposite region to the gate, and flow direction region. Results of computer simulation revealed that the warpages were strongly related to glass fiber orientation. Flat specimen showed the smallest warpage and the specimen with ribs to the flow direction showed a high resistance to warpage. Warpage highly depended upon part design rather than molding condition. It was concluded that the rib design and selection of gate location in injection molding would be the most important factors for the control of warpage since those are directly related to the fiber orientation during molding.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.408-411
• /
• 2017

In this paper, we propose an integrated control system that measures neutrons, gamma ray, and x-ray. The proposed system is able to monitor and control the data measured and analyzed on the remote or network, and can monitor and control the status of each part of the system remotely without remote control. The proposed system consists of a gamma ray/x-ray sensor part, a neutron sensor part, a main control embedded system part, a dedicated display device and GUI part, and a remote UI part. The gamma ray/x-ray sensor part measures gamma ray and x-ray of low level by using NaI(Tl) scintillation detector. The neutron sensor part measures neutrons using Proportional Counter Detector(low-level neutron) and Ion Chamber Type Detector(high-level neutron). The main control embedded system part detects radiation, samples it in seconds, and converts it into radiation dose for accumulated pulse and current values. The dedicated display device and the GUI part output the radiation measurement result and the converted radiation amount and radiation amount measurement value and provide the user with the control condition setting and the calibration function for the detection part. The remote UI unit collects and stores the measured values and transmits them to the remote monitoring system. In order to evaluate the performance of the proposed system, the measurement uncertainty of the neutron detector was measured to less than ${\pm}8.2%$ and the gamma ray and x-ray detector had the uncertainty of less than 7.5%. It was confirmed that the normal operation was not less than ${\pm}15$ percent of the international standard.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5477-5485
• /
• 2011

This study comparatively analyzed the instrumentation and the voicing structure, which were shown in the film music titled "Star Wars-Main Title" by John Williams(1932~), with analytical technique that the writer mapped out, and aimed to discover the progression principle in orchestration based on the results. Also, it applied a functional part-division method that was classified and distributed into 3 functional parts according to auditory cognitive level as for each of functional elements such as the musical element. And, it made it pattern for the vertical structure and the voicing structure in musical instruments, which were distributed to each functional part based on this, and comparatively analyzed the standard point in a change which were shown according to progression of music, namely, the operating technique. As for the results of this study, first, each theme has specific instrumentation pattern. Unity was emphasized by consistently organizing those things in exposition, reprise, and recapitulation of each theme. To reinforce diversity, an attempt was made such as adding and reducing auxiliary instruments in the middle part and the rear part. Second, even in a change of instrumentation pattern by passage in accordance with a change in theme amid each part, the same instrumental group was organized in the middle part, thereby having maintained unity. Third, to strengthen diversity by clause, which is forming each theme, a continuous change in voicing pattern was created by adding or omitting a part. Fourth, the voicing concentration was maintained the structure of "thinness-thickness" in the whole musical piece. However, in part 2 that is repeated theme 3, diversity was pursued with a unique change of "thickness-thickness." Fifth, in part 4 that is indicated theme 4, the other diversity was intensified with the inverted range in the front part and the middle part. Accordingly, based on the conclusions that were indicated in this work, it is desired to be conducive to understanding the horizontal consideration and the progression principle of orchestration.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.14-23
• /
• 1987

This study was carried out to investigate the anatomical characteristics, the radial and axial variation of the cell dimension and bulk density for four bamboo species used as the major material of bamboo products in Korea; Phyllostachys(P.bambusoides, P.edulis, P.nigra var.henonis, and Pnigra). The results obtained were summarized as follows; 1) In the outer part of culm, the mophological difference of cell diameter and distribution were not acknowledged. However, gum-like substance was occurred In the epidermis, hypodermis, cortex and metaxylem vessel of P.nigra, while it was occured only in the metaxylem vessel of P.edulis. 2) The protoxylem vessel in the central zone of culm-wall could be in the two types; the first type consisted of 4-5 small cell pieces occurred in P.edulis and P.nigra var. henonis, the second type of 1-2 large cell pieces in P.bambusoides and P.nigra. And transition of cell diameter from the vascular bundle sheath to the ground tissue was gradually enlarged in P.nigra and P.edulis but abruptly in P.bambusoides and P.nigra var. henonis. 3) Thin-wall tyloses were well developed in the outer and central zone of culm-wall in four species. 4) Compared with the central part of culm-wall, the number of parenchyma cells and the amount of the vascular bundle sheaths per unit area were a few in the inner part. The inner part nearest to the pith cavity was consisted of thick-well parenchyma cell. 5) The dimensional variations of metaxylem vessel and parenchyma cell in the radial direction were decreased from the inner part to the epidermis in all species observed. 6) The fiber length was the maximum in the central zone and its diameter was increased from the inner part to the outer part. In the axial variation. fiber length was slightly increased from the base and then decresed slowly toward the top, and its diameter was reverse. 7) The axial variation of the bulk density was continuously increased from the base toward the top and its radial variation was rapidly increased from the inner part to the epidermis.

• The Journal of Korean Medicine
• /
• v.16 no.1 s.29
• /
• pp.21-35
• /
• 1995

The female's part-cold hypersensitivity syndrome is a disease which the oriental people better than the western people suffer from and if it would be sick for a long time, it could bring into the other diseases. In the Oriental Medicine, the coldness is regarded as one of the most important causes which induce female's diseases. Nowadays the number of the female patients are ascending that serously appeal the coldness-sense and pain-sense at the particular part of the body, for example, hand, foot, abdomen, waist, external genital portion and so on. These are caused by female's own characteristics of the menstration and delivery, and the influence of the circumstances. The Oriental Medicine have better effects by the diagnosis and treatment according per symptom in the contrast with the Western Medicine having difficulties in the point of accurate diagnosis and treatment. This epidemiologic study was undertaken by using specifically designed questionair and physical examination to evaluate the incidence and degree of female's part-cold hypersensitivity syndrome in 362 parous women, Who were randomly selected among the patients visiting the Department of Gynecology, Kyung Hee Medical Center from Feb. to Jul. 1995. The results were as follows: 1. The overall incident of female's part-cold hypersensitivity syndrome was 92.8%. 2. Subdivision of 336 patients was made according to severity Grade I - 31.9%, severity Grade II - 46.9%, severity Grade III - 21.4%. 3. As for the appealed portion of female's part-cold hypersensitivity syndrome, foot and hand, lower abdomen, knee, waist, hip, shoulder, leg, and ankle were in desending order. 4. As for the causes of female's part-cold hypersensitivity syndrome, it was deeply associated with the management of the abortion, delivery and puerperium. 5. The incidence of female's part-cold hypersensitivity syndrome did not show incerased tenency according to the quantity and quality of female's menstration, leukorrhea, and the increase of parity. 6. 165 patients among 336 patients wanted the treatments of the Oriental Medicine.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.3
• /
• pp.71-83
• /
• 2016

This study attempted to analyze trends of structural changes in the front middle part of men's underwear and get basic data for the development of men's underwear patterns. In terms of a research method, the structure and pattern of the front middle part of men's underwear were analyzed by referring to the design and description of the drawing, focusing on men's underwear which targeted to isolate penis from scrotum among the 'men's underwear' or 'functional men's underwear'-related patents. According to the study, three topics were obtained as follows: a support attached to the inside of the front middle part; inner cloth attached to the inside of the front middle part; change in the structure of the front middle panel. The aspects by the specific topic targeted to isolate penis from scrotum and prevent the scrotum from adhered to a thigh are as follows: 1) When a support is attached to the inside of the front middle part, the following three methods are proposed: Penis isolated from scrotum by a rest which is designed using the band; penis and scrotum rested in the band and in a pocket respectively; protruded rest inside the front middle part of the underwear. 2) When an inner cloth is attached to the inside of the front middle part, the following methods are designed: A pocket-type inner cloth is attached; isolation of penis hole from the scrotum pocket using a rectangular separator; U-shaped pocket designed to rest penis and scrotum is attached. 3) Regarding change in the structure of the front middle panel, the integration of penis and scrotum resting parts can be divided into two cases: Securing a space using wrinkles; keeping it voluminous using the vertical line. In this all-in-one penis and scrotum-holding type, in addition, different front panel patterns were applied.