• Genomics & Informatics
• /
• v.5 no.2
• /
• pp.77-82
• /
• 2007

Serotonin (5-HT), the endogenous nonselective 5-HT receptor agonist, activates the inositol-1,4,5-triphosphate/calcium $(InsP3/Ca^{2+})$ signaling pathway and exerts both stimulatory and inhibitory actions on cAMP production and neuromodulin secretion in rat hypothalamic neurons. Specific mRNA transcripts for 5-HT1A, 5-HT2C and 5-HT4 were identified in rat hypothalamic neurons. These experiments were supported by combined techniques such as cAMP and a $Ca^{2+}$ assays in order to elucidate the associated receptors and signaling pathways. The cAMP production and neuromodulin release were profoundly inhibited during the activation of the Gi-coupled 5-HT1A receptor. Treatment with a selective agonist to activate the Gq-coupled 5-HT2C receptor stimulated InsP3 production and caused $Ca^{2+}$ release from the sarcoplasmic reticulum. Selective activation of the Gs-coupled 5-HT4 receptor also stimulated cAMP production, and caused an increase in neuromodulin secretion. These findings demonstrate the ability of 5-HT receptor subtypes expressed in neurons to induce neuromodulin production. This leads to the activation of single or multiple G-proteins which regulate the $InsP3/Ca^{2+}/PLC-{\gamma}$ and adenyl cyclase / cAMP signaling pathways.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• Clinical and Experimental Pediatrics
• /
• v.52 no.9
• /
• pp.984-990
• /
• 2009

Purpose : Being small for gestational age (SGA) is a risk factor of short stature in children. Genetic background such as mid-parental height (MPH) is known to influence growth of children born SGA. We studied the relationship between growth of children born SGA and MPH and studied the effects of insulin-like growth factor (IGF-I) and insulin-like growth factor binding protein 3 (IGFBP-3) on postnatal growth in children born SGA according to MPH. Methods : Forty-nine neonates born SGA were included in this study. We defined corrected height standard deviation score (cHtSDS) by modified height SDS (HtSDS) based on their MPH. We categorized subjects into group 1 consisting of children with cHtSDS ${\geq}0$ (n=35) and group 2 consisting of children with cHtSDS <0 (n=14), and compared IGF-I and IGFBP-3 between the two groups. Results : The HtSDSs and cHtSDSs in groups 1 and 2 were $0.06{\pm}1.05$ vs. $-0.95{\pm}0.85$ (P=0.000) and $0.78{\pm}0.93$ vs. $-0.46{\pm}0.67$ (P=0.000), respectively. IGF-I SDS was higher in group 1 than in group 2 ($2.82{\pm}3.69$ vs. $0.23{\pm}2.42$, P=0.012). Total cHtSDS ($0.42{\pm}1.03$) was significantly higher than HtSDS ($-0.22{\pm}1.10$) (P=0.000). Conclusion : Our results show that cHtSDS differs significantly from HtSDS. Growth assessment by standardized growth curve does not uniformly show effects of genetic factors. A more accurate assessment of growth uses a personalized corrected growth curve that considers the genetic factor measured by MPH.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.81-85
• /
• 2015

The organic/inorganic hybrid photovoltaic devices have been studied using Poly(3-hexylthiophene-2,5-diyl) (P3HT) : [6, 6]-Phenyl C61 butyric acid methyl ester (PCBM) and GaN. We traced the effect of short circuit current density with different annealing method under the various concentration and ratio of P3HT:PCBM. During the pre-annealing course, the heat treatments were performed each time at low temperature after the organic layer coated and the samples were heated at high temperature through one or two steps under the post-annealing process. It revealed that the samples with post-annealing process had higher values of short circuit current density than the other samples upon pre-annealing. And the interesting high short circuit current density features were observed at 1:1 mixing ratio and 1wt% of P3HT:PCBM.

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.25-31
• /
• 2000

Poly(3-hexyl thiophene)(P3HT) and poly(3-dodecyl thiophene)(P3DT) were polymerized by oxidative coupling with ferric chloride. The P3HT light-emitting device emitted red light and it could be observable in the ordinary indoor light. The device had the turn-on electric field of about 3$\times$$10^7$ V/m. The maximum electroluminescene (EL) intensity was obtained when the thickness of polymer layer was about 130 nm in IT0/P3HT/Al device. The maximum external quantum yield was 0.002%. The maximum luminance was 21 cd/$m^2$. The EL intensity decreases with increasing the crystallinity of the polymer layer. By using the oriented poly(3-alkyl thiophene)(PAT) layer as an electroluminescent layer in the ITO/polymer/Al light-emitting devices, the polarized EL light emission was observed. The EL intensity ratio of parallel to perpendicular direction to the stretch direction for P3HT was about 1.40.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.134-134
• /
• 2012

We investigated the interface of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) by using photoelectron spectroscopy (PES). These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. Study of the BHJ interfaces is difficult because the organic films are typically prepared by spin coating in ambient conditions. This is incompatible with the interface electronic structure probes such as PES, which requires ultrahigh vacuum conditions. Study of interface requires gradual deposition of thin films that is also incompatible with the spin coating process. In this work, we used electrospray vacuum deposition (EVD) technique to deposit P3HT and PCBM in high vacuum conditions. EVD allows us to form polymer thin films onto ITO substrate in a step-wise manner directly from solutions and to use PES without exposing the sample to the ambient condition. Although the morphology of the EVD deposited P3HT films observed by optical and atomic force microscopes is quite different from that of the spin coated ones, the valence region spectra were similar. PCBM was deposited on the P3HT film in a similar manner and the energy level alignment between these two materials was studied. We discuss the relation between Voc of P3HT:PCBM solar cell and HOMO-LUMO energy offset obtained in this study.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2707-2712
• /
• 2009

5-$HT_{3}$ receptor;5-$HT_{3A}$ receptor channel activity;Novel 5-$HT_{3}$ receptor channel current blockers;Chlorophenyl substituted piperazinylethylaminomethylpyrazoles; The 5-$HT_{3A}$ receptors are one of ligand-gated ion channels and are known to be involved in visceral pain, anxiety, or anticancer agent-induced nausea and vomiting. In present study, we designed novel skeletons based on the developed 5-$HT_{3}$ receptor antagonists and evaluated their effects on 5-$HT_{3A}$ receptor channel currents ($I_{5-HT}$) of a series of pyrazole derivatives having N-chlorophenylpiperazine functionality (6-9). We found that most of N-p-chlorophenyl substituted piperazinyl-pyrazole derivatives (7b, 7c, 7e and 7h) exhibited the high potency for the inhibition of $I_{5-HT}$, whereas the compound without chloride (6) or with m-chlorophenyl group (a serious of 8 and 9) showed the low potency. These result indicate that p-chlorophenyl group is might play an important role for increasing the inhibitory potency on $I_{5-HT}$.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.2
• /
• pp.137-143
• /
• 1995

The peptide transporter can be utilized for improving the bioavailability of compounds that are poorly absorbed. Characterization of the dipeptide uptake into the human intestinal epithelial cells, HT-29 was investigated. The uptake of tritiated glycylsarcosine $([^3H]-Gly-Sar,\;0.1\;{\mu}Ci/ml)$ was measured in confluent or subconfluent HT-29, Caco-2, and Cos-7 cells. Uptake medium was the Dulbecco's Modified Eagle's Media (DMEM) adjusted to pH 6.0. Both HT-29 and Caco-2 cells expressed the dipeptide transporter significantly (p<0.005) but Cos-7 did not. Certain portions of passive uptake were observed in all three cell lines. Uptake of Gly-Sar was largest at 7 days after plating HT-29 cells with significant inhibition with 25 mM cold Gly-Sar (p<0.05). but expression ratio of the dipeptide transporter was 0.7, suggesting lower expression. The effect of pH on Gly-Sar uptake was not significant in the range of pH 6 to 8. Gly-Sar uptake was also inhibited with 50 mM carnosine, 25 mM Gly-Sar, and 35 mM cephalexin significantly (p<0.05). From above results the dipeptide transporter was expressed well in HT-29 cells and was similar to that in the small intestine, suggesting that large amounts of mRNA of the transporter from the cells can be obtained.

• Journal of the Korean Chemical Society
• /
• v.68 no.3
• /
• pp.146-150
• /
• 2024

Precise molecular configuration elucidation of poly(3-hexylthiophene) (P3HT) through advanced spectroscopic techniques is pivotal for enhancing P3HT-based photovoltaic device efficiencies since its high charge-carrier mobility is directly correlated to its well-ordered structure. In this study, we examine Raman depolarization ratios of annealed and non-annealed P3HT films to elucidate their intermolecular π-π configurations. Our findings suggest that the backbone of the annealed film possesses stronger π-π conjugation overlaps than that of the non-annealed film owing to the greater depolarization ratio of the annealed film. In addition, the depolarization ratios are also supported by theoretical calculations, where parallel-stacked thiophene structures display a higher depolarization ratio compared with that of twisted-stacked structures, as calculated by the Møller-Plesset perturbation theory. This study highlights the utility of polarized Raman spectroscopy as a versatile tool for assessing the degree of molecular order in highly conjugated polymer films.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.188-192
• /
• 2014

In this work, it is possible to simply improve the molecular ordering of a conjugated polymer thin film by dipping into poor solvent. The structural order, optical, and electrical properties of poly(3-hexylthiophene) (P3HT) films were profoundly influenced by dipping time and solubility of solvent. Especially the dipping time in methylene chloride was controlled to efficiently improve the molecular ordering of the P3HT. The correlation between the structural order and the electrical properties was used to optimize the dipping time in the appropriate solvent.