• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.235-241
• /
• 2003

The effect of ultraviolet (UV) radiation on the characteristics of algae-derived dissolved organic matter (DOM) was examined by comparing the biodegradability and DOM fraction distribution of algal DOM before and after UV exposure. Algal DOM from two axenic cultures of Microcystis aeruginosa and Oscillatoria agardhii were irradiated for 24 h at a UV intensity of 42 W/$m^2$. A complete degradation of algal DOM during the UV exposure did not occur, remaining at constant concentrations of dissolved organic carbon(DOC). After UV exposure, however, microbial degradations were reduced by 17% in M. aeruginosa and 53% in O. agardhii, respectively, and decomposition rates also were two times lower in UV exposed algal DOM. In addition, the chemical compositions of algal DOM altered substantially after UV radiation exposure. The proportions of hydrophilic bases (HiB; protein-like DOM) decreased considerably in both algal DOM sources after UV exposure (16.8% and 20.0% of DOM, respectively), whereas those of hydrophilic acids (HiA; carboxylic acids-like DOM) increased as much as the decrease of the HiB fraction. Capillary ion electrophoresis (CE) analysis showed that several carboxylic acids increased significantly after UV exposure, further confirming an increase in HiA fractions. The results of this study clearly indicate that algal DOM can be changed in its chemical composition as well as biodegradability without complete degradation by UV radiation.

• Herbal Formula Science
• /
• v.25 no.2
• /
• pp.179-191
• /
• 2017

Objectives : Increased oxidative stress by reactive oxygen species (ROS) has been suggested as a major cause of muscle fatigue. Although several studies have demonstrated the various biological properties of Sophora flavescens Aiton, Glycyrrhiza uralensis Fischer and Dictamnus dasycarpus Turcz, but the antioxidative potentials have not been clearly demonstrated. The present study was designed to investigate the protective effects of their water and ethanol extract mixtures (medicinal herbal mixtures, MHMIXs) on hydrogen peroxide ($H_2O_2$)-induced cell damage and apoptosis in C2C12 myoblasts. Methods : Cytotoxicity was assessed by an MTT assay. Quantitative evaluation of apoptosis induction and ROS production was evaluated by flow cytometry analysis. Expression levels of apoptosis regulatory and DNA-damage proteins were detected by Western blotting. Result : The inhibition of $H_2O_2$-induced cell proliferation was effectively blocked in extracts of 3: 1: 1 (EMHMIXs-1) or 2: 2: 1 (EMHMIXs-2) of S. flavescens, G. uralensis and D. dasycarpus Turcz, ethanol extracts from various complex extracts in C2C12 myoblasts. EMHMIXs-1 and EMHMIXs-2 also effectively attenuated $H_2O_2$-induced C2C12 cell apoptosis, which was associated with the restoration of the upregulation of Bad and death receptor 4, and downregulation of XIAP and cIAP-1 induced by $H_2O_2$. In addition, these herbal mixtures significantly blocked the $H_2O_2$-induced ROS generation and phosphorylation of $p-{\gamma}H2A.X$, which suggests that they can prevent $H_2O_2$-induced cellular DNA damage. Conclusions : The results suggest that EMHMIXs-1 and EMHMIXs-2 could block the DAN damage and apoptosis of C2C12 myoblasts by oxidative stress through blocking ROS generation.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.17-24
• /
• 2004

Purpose: To evaluate the treatment outcomes after postmastectomy radiotherapy (PMRT) and chemotherapy in patients with breast cancer. Materials and Methods: The PMRT were retrospectively analyzed in 83 patients with stage II-III female breast cancer treated between 1989 and 1995. The median age was 46 years (range, 23-77): Seventy-seven patients had modified radical mastectomies, 5 radical mastectomies and 1 simple mastectomy. Three patients ($4\%$) had pathologically negative axillae, and the remaining 80 ($96\%$) had positive axillae. Eleven, 23, 44 and 5 patients had pathological stages IIA, IIB, IIIA, and IIIB, retrospectively. Eighty ($96\%$) patients were treated with hockey-stick fields. The median dose of PMRT was 50.4 ey, in 1.8 Gy fractions. Adjuvant systemic chemotherapy was given to 74 patients ($89\%$). CMF-based or doxorubicin-containing regimens were given to 54 patients ($55\%$). The median follow-up time was 82 months (range, 8-171) after the mastectomy. Results: The 5 and 10-year overall survival rates for all patients were 65 and $49\%$, respectively. The univariate and multivariate analyses of the factors affecting the overall survival revealed the stage to be the most significant prognostic factor (p=0.002), followed by the combination of chemotherapy. Thirteen patients $16\%$ developed a LRF, at an interval of 4-84 months after radiotherapy, with a median of 20 months. The only significant prognostic factor affecting LRF was the combination of chemotherapy, in both the univariate and multivariate analyses. With respect to the sequence of chemoradiation, the sequence had no saatistical significance (p=0.90). According to the time interval from mastectomy to the onset of radiotherapy, the LRFR of the patients group treated by RT within or after 6 month postmastectomy 6 months were 14 vs. $27\%$ respectively (p=0.24). One third of the pa41en1s (26/83) developed distant metastasis, in 2-92 months, after radiotherapy, with a median of 21 months. The most commonly involved site was bone in 13 cases. The pathological staging was the only significant prognostic factor in both the univariate and multivariate analyses that affected distant failure. Radiological finding of radiation pneumonitis on a simple chest x-ray was shown in $20\%$ (17/83), with a time interval ranging from 2 to 7 months post-radiotherapy, with a median of 3 months. The stable lung fibrosis settled in 11 patients ($65\%$). Conclusion: It was concluded through this analysis that the combination of PMRT with in chemotherapy resulted in better overall survival and local control than PMRT alone in patients needing PMRT.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• Restorative Dentistry and Endodontics
• /
• v.24 no.3
• /
• pp.511-518
• /
• 1999

This study was performed to evaluate the mechanical properties of light-cured restorative composites by compression and indentation tests. Five commercially available light-activated composites (Heliomolar : HM, Aelitefil : AF, Amelogen : AG, Clearfil AP-X : CF, Z100 ZH) were used Disc specimens of 12mm in diameter and 1 mm in thickness and Cylindrical specimens of 3mm in diameter and 6mm in length were prepared for the indentation and compressive test, respectively. All specimens were immersed in distilled water at $37^{\circ}C$ for 30 days. An indentation test of 68-degree trigonal diamond pyramid was made under 10 g load for 15 seconds and an Knoop indentation test was made under 50 g load for 15 seconds. Hardness numbers, characteristic indentation depths and permanent deformation were measured during indentation of the 68-degree trigonal diamond pyramid compressive test was carried out at a crosshead speed of 0.5mm/min. The results obtained were summarized as follows, 1. The highest hardness value was obtained in the CF group and the lowest value was obtained in the HM group. Hardness values showed no significant, difference between AG group and HM group but other groups showed the significant differences in each group(p<0.05). 2. Hardness number by Knoop pyramid were higher than those of 68-degree trigonal diamond pyramid. 3. Plastic deformation during the indentation of 68-degree trigonal diamond pyramid was the lowest in the CF group and the largest in the HM group. Results of Tukey test showed the significant difference between CF group and others; also between ZH and AF groups and AG and HM groups(p<0.05) 4. The highest compressive strength was obtained in the CF group and the lowest compressive strength was obtained in the ZH group. Compressive strength values showed no significant difference between CF group and ZH group but other groups showed the significant differences in each group(p<0.05).

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.1
• /
• pp.21-28
• /
• 2002

Objective: To evaluate whether co-culture of oocytes on vero cell monolayers from Day 0 (Day 0 group) after egg retrieval results in an increase in developmental capacity such as fertilization rate, embryo quality, blastulation and clinical pregnancy rate compared with co-culture of oocytes from Day 1 (Day 1 group). Methods: Sperms were treated with Hams F-10 supplemented with 10% human follicular fluid (hFF). Vero cells for co-culture were prepared in TCM-199 with 10% FBS. Oocytes were co-cultured from Day 0 and fertilized oocytes were co-cultured from Day 1 on vero cell monolayers in DMEM with 10% and 20% hFF, respectively after egg retrieval. On day 1, 2 and 5, fertilization rate and grade of embryos and blastocysts were evaluated. Results (fertilization rate, cleavage rate, grade of embryos and blastocysts and pregnancy rate) were considered statistically significant when p value was less than 0.05 using t-test and $x^2$. Results: In sibling oocytes of same cycles, no differences were found in fertilization rate (94.6 vs. 91.4%), cleavage rates (94.6 vs. 91.4%), embryo grade (on day 2 and 3) and blastulation (65.6 vs. 57.0%) and their grade. In different oocytes of different cycles (patients), no differences were found in fertilization (79.8 vs. 78.3%), cleavage rates (77.7 vs. 76.4%) and blastulation (56.0 vs. 45.3%), but pregnancy rate was higher in the Day 0 group than in the Day 1 group (60.0 vs. 42.9%). Conclusions: This study revealed that the embryonic development capacities were not affected by the different co-culture time in the sibling oocytes of same cycles. Although no statistical significance, because of small size of study, there was a trend for higher pregnancy rates in Day 0 group compared to Day 1 group in different oocytes of different cycles.

• Imaging Science in Dentistry
• /
• v.38 no.3
• /
• pp.169-176
• /
• 2008

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-$9000^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by $X^2$-test. Results : 1. There was no statistical significance according to 3 types (type I, type II, type III) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

• Nutrition Research and Practice
• /
• v.15 no.5
• /
• pp.604-612
• /
• 2021

BACKGROUND/OBJECTIVES: We aimed to investigate the association of waist circumference (WC) with body composition among individuals with a normal body mass index (BMI) to distinguish muscle and fat mass, as both affect health differently. SUBJECTS/METHODS: We analyzed dual-energy X-ray absorptiometry data (derived from the Korean National Health and Nutrition Survey, which includes information on fat and lean mass) of 7,493 adults with a normal BMI. Subjects were categorized into four groups of increasing WC. The fourth group was defined as being centrally obese. Each number of subjects are as follows: 1,870, 695, 231, and 39 among men and 3,054, 1,100, 406, and 98 among women. We conducted a sex-stratified linear regression analysis of body composition according to WC group after adjustments for covariates. RESULTS: We observed a positive association of body fat with increasing WC in both men and women (all P for trend: < 0.001). The adjusted mean values for percent body fat with 95% confidence intervals (CIs) according to the four WC groups in ascending order were 17.8 (17.5-18.3), 21.0 (20.6-21.5), 22.1 (21.5-22.8), and 25.1 (24.2-26.1) in men and 29.7 (29.4-30.0), 32.0 (31.6-32.3), 32.9 (32.4-33.4), and 34.7 (33.2-36.1) in women. However, there was an inverted J-shaped association between muscle mass and WC. The fourth group had a higher percent body fat and lower muscle mass than other groups. The adjusted mean values for appendicular skeletal muscle mass index (kg/m²) with 95% CIs according to the four WC groups in ascending order were 7.55 (7.51-7.59), 7.62 (7.56-7.68), 7.65 (7.56-7.74), and 7.22 (7.04-7.41) in men and 5.83 (5.80-5.85), 5.96 (5.92-6.00), 6.03 (5.96-6.10), and 5.88 (5.73-6.03). CONCLUSIONS: There was a positive association between body fat and WC among individuals with normal BMI; conversely there was an inverted J-shaped association between lean body mass and WC. Our findings support the WC measurement should be included in obesity evaluations for adults with a normal BMI.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.779-789
• /
• 2016

A total of 33 accessions of pepper (Capsicum spp.), including previously reported and newly discovered sources of resistance to bacterial spot caused by Xanthomonas euvesicatoria, were evaluated for their resistance to bacterial spot. The selected accessions were then grown and their horticultural characteristics were recorded. In a test for hypersensitive resistance (HR) to four races (P1, P3, P7, P8) of the pathogen found in Korea, KC00939 and Chilbok No.2, which carry the Bs2 gene, exhibited a hypersensitive response to all four races, as expected. Chilbok No.3, which carries the Bs3 gene, showed a hypersensitive reaction to race 1 and 7, as expected. KC00939 exhibited a high ASTA color value and tolerance to multiple infections from a viral complex of Cucumber mosaic virus (CMV) and Broad bean wilt virus (BBWV). Thus, this accession represents a promising genetic resource for breeding cultivars with multiple disease resistance and strong red coloration. KC01327, KC01617, KC01015, KC01760, KC01779, KC01137, KC01328, KC01006, KC00127, KC01704, and KC00995 did not exhibit hypersensitivity but showed a high level of general resistance when evaluated by spray inoculation. KC01617, KC01760, KC01779, KC01137, KC01704, and KC01777 are newly identified sources of resistance to bacterial spot. The previously and newly identified sources of resistance to bacterial spot evaluated in this study, including information about their resistance to CMV and BBWV complex in the field, the contents of pungent and sweet taste components, and the color values of dry fruits, will be useful for breeding pepper cultivars with resistance to bacterial spot.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.169-181
• /
• 2004

SK Telecom has already constructed GIMS system as the base common framework of LBS/GIS service system based on OGC(OpenGIS Consortium)'s international standard for the first mobile vector map service in 2002, But as service content appears more complex, renovation has been needed to satisfy multi-purpose, multi-function and maximum efficiency as requirements have been increased. This research is for preparation ion of GML3-based platform to upgrade service from GML2 based GIMS system. And with this, it will be possible for variety of application services to provide location and geographic data easily and freely. In GML 3.0, it has been selected animation, event handling, resource for style mapping, topology specification for 3D and telematics services for mobile LBS multimedia service. And the schema and transfer protocol has been developed and organized to optimize data transfer to MS(Mobile Stat ion) Upgrade to GML 3.0-based GIMS system has provided innovative framework in the view of not only construction but also service which has been implemented and applied to previous research and system. Also GIMS channel interface has been implemented to simplify access to GIMS system, and service component of GIMS internals, WFS and WMS, has gotten enhanded and expanded function.