• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.325-329
• /
• 2011

This paper introduces the 10b 1MS/s SAR ADC with double sampling technique to reduce the power consumption. The SAR ADC is implemented in CMOS 1P8M 65nm technology and occupies 0.11um2. The maximum sampling rate is 1MS/s. The simulated SNDR and SFDR are 55.6dB and 62.7dB at 484kHz input frequency, respectively. The implemented data converter consumes 507uW with 1.2-V supply.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.554-562
• /
• 2006

Two lines of mice, M16 selected for rapid growth and a randomly selected control ICR as well as their reciprocal crosses were used to study the effects of genotype on whole-body energetics and intestinal responses to monensin. Six mice, eight weeks of age, from each line or reciprocal cross were assigned to one of two treatments, 1) drinking water containing 20 mmol/L monensin dissolved in 0.5% V/V ethanol, and 2) drinking water containing 0.5% V/V ethanol (control) for two weeks. After 11 days (age of 9 weeks and 4 days), whole-body $O_2$ consumption was measured. At the end of two weeks, jejunal $O_2$ consumption, intestinal tissue composition and histomorphometrics as well as the rate and efficiency of glucose absorption were estimated. In comparison with the control, monensin administration in drinking water resulted in less daily water intake (13.4 vs. 15.5 ml/mouse, p<0.01), less protein to DNA ratio of jejunal mucosa (5.41 vs. 6.01 mg/mg, p<0.05), lower villus width (88 vs. $100{\mu}m$, p<0.05), and less jejunal tissue $O_2$ consumption enhancement by alcohol (7.2 vs. 10.5%, p<0.01) in mice. Other than those changes, monensin had little (p>0.05) effect on variables measured in either line of mice or their reciprocal cross. In contrast, the M16 line, selected for rapid growth, as compared to the ICR controls or the reciprocal crosses, had less initial (pre-monensin treatment) whole-body $O_2$ consumption per gram of body weight (1.68 vs. $2.11-2.34{\mu}mol/min{\cdot}g$ BW, p<0.01) as compared to the ICR and reciprocal crosses. In addition, the M16 mice exhibited greater growth (412 vs. 137-210 mg/d, p<0.05), better feed efficiency (41.7 vs. 19.9-29.3 mg gain/g feed, p<0.05), shorter small intestines adjusted for fasted body weight (1.00 vs. 1.22-1.44 cm/g FBW, p<0.05), wider villi (109 vs. $87-93{\mu}m$, p<0.05), more mature height of enterocytes (28.8 vs. $24.4-25.1{\mu}m$, p<0.05) and a lower rate (91 vs. $133-145{\eta}mol\;glucose/min{\cdot}g$ jejunum, p<0.05) and less energetic efficiency (95 vs. $59-72{\eta}mol$ ATP expended/${\eta}mol$ glucose uptake, p<0.05) of glucose absorption compared to the ICR line and the reciprocal cross. Monensin had little (p>0.05) effect on whole-body $O_2$ consumption and jejunal function, whilst selection for rapid growth resulted in an apparent down-regulation of intestinal function. These data suggest that genetic selection for increased growth does not result in concomitant changes in intestinal function. This asynchrony in the selection for production traits and intestinal function may hinder full phenotypic expression of genotypic growth potential.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.2
• /
• pp.171-183
• /
• 1992

In this paper, the behaviour of cavitation erosion, influence of corrosion and corrosion control on slide bearing metals for internal combustion engine were investigated, and this experiment was done by the vibratory cavitation erosion tester. The main results obtained are as follows: 1. With decreasing the space between horn and specimen, the weight loss and its rate increased step by step. But the weight loss and its rate of 0.2mm space decreased conversely more than that of 0.4mm space at early stage. 2. The weight loss and its rate with change of pH were appeared to the order of pH2>pH12>pH7>pH4. And the weight loss and its rate at pH 4 decreased at best. 3. The weight loss and its rate by cavitation erosion for bearing metals were shown to the order of W.M7>W.M1>K.M4. 4. There appeared mainly small pit hole at pH2, and appeared the pit of netting thread type at pH12 by the results of the damaged surfaces at pH2 and pH12 environments that were sensitive to cavitation erosion. 5. With increasing the viscosity of lubricating oil, the weight loss rate by cavitation erosion became dull at the space below 0.5mm. 6. The protective efficiency of cavitation erosion-corrosion is superior inhibitor of chormate(25 ppm) to cathodic protection.

• Journal of Life Science
• /
• v.31 no.4
• /
• pp.367-376
• /
• 2021

This study evaluated the changes in the pH, acidity, lactobacillus and total bacterial counts, and sensory evaluation of Dolsan leaf mustard Kimchi (DLMK) after incubation for 50 days at 4℃ in the presence of one of three lactic acid bacteria (LAB); Weissella kimchii (W.k.), Leuconostoc gelidum (L.g.), and Leuconostoc mesenteroides (L.m.). The pH ranged from 5.12 to 5.62 and the acidity varied from 0.62% to 3.77% upon the addition of a 2% salt solution to the DLMK prepared using the three LAB. Overall, the LAB counts decreased rapidly from day 10 to day 20 of fermentation, whereas the total bacterial count decreased during the 50 days of fermentation. The pH and acidity in the DLMK ranged from 5.22 to 5.61 and from 0.91% to 4.41%, respectively, in the absence of the 2% salt solution. The LAB count decreased until 20 days and then increased thereafter, whereas the total bacterial count decreased until 20 days and then increased until 50 days. The condiments treated with or without the 2% salt solution showed a gradual decrease in appearance, flavor, salinity, hot taste, and overall acceptability as fermentation time increased. In addition, DPPH radical scavenging activity was high for 2% W. k. and 2% L. m., and ACE inhibitory activity was the highest, at 70.38% in the marinated condiments fermented at 10℃ for 8 days. Thus, this condiment production method may be useful for DLMK and other Kimchi types.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.56-63
• /
• 2010

This work proposes a 12b 100MS/s 0.13um CMOS pipeline ADC for battery-powered mobile video applications such as DVB-Handheld (DVB-H), DVB-Terrestrial (DVB-T), Satellite DMB (SDMB), and Terrestrial DMB (TDMB) requiring high resolution, low power, and small size at high speed. The proposed ADC employs a three-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. A single shared and switched op-amp for two MDACs removes a memory effect and a switching time delay, resulting in a fast signal settling. A two-step reference selection scheme for the last-stage 6b FLASH ADC reduces power consumption and chip area by 50%. The prototype ADC in a 0.13um 1P7M CMOS technology demonstrates a measured DNL and INL within 0.40LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 60.0dB and a maximum SFDR of 72.4dB at 100MS/s, respectively. The ADC with an active die area of 0.92 $mm^2$ consumes 24mW at 1.0V and 100MS/s. The FOM, power/($f_s{\times}2^{ENOB}$), of 0.29pJ/conv. is the lowest of ever reported 12b 100MS/s ADCs.

• KSBB Journal
• /
• v.16 no.3
• /
• pp.246-252
• /
• 2001

We isolated a bacterium that produces an extracellular maltopentaose(G5)-forming amylase from amylose and soluble starch. The bacterium was identified and assigned as a Bacillus sp. AIR-5. The amylase did not hydrolyze maltose, maltotriose, maltotetraose or maltopentaose. Optimum medium composition for maltopentaose production in flask culture was 2%(w/v) soluble starch, 0.4%(w/v) tryptone, 0.5%(w/v) NaCl, 0.5%(w/v) K$_2$HPO$_4$, and 3 mM CaCl$_2$at pH 8.0, 28$^{\circ}C$. The highest yield for maltopentaose production in this condition was 6.45 g/L and was 32.55% of theoretical yield.

• Korean Journal of Microbiology
• /
• v.26 no.3
• /
• pp.162-166
• /
• 1988

Bacteriophage M13 DNAs carrying the wild type or base substituted SV40 DNA replication origins were used for replication assay. In vivo and in vitro assay with African green monkey cell line COS-1 showed that the replication of M13-SV40 recombinant DNAs was restricted like a pBR322 SV40 recombinant DNA(Lusky and Botchan, 1981). Furthermore, recombinant phage DNAs isolated from the transfected siminan cells subsequently show a reduced ability to retransform E. coli. But pATSV-W(Kim et al., 1988) was replicated in COS-1 cells normally. We think that a poison sequence may exist on bacteriophage M13 DNA like pBR322.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.143-149
• /
• 2017

LED arrays with pixel numbers of $3{\times}3$, $4{\times}4$, and $5{\times}5$ have been studied in this paper in order to enhance the optical output power and decrease heat dissipation of an AlGaInP-based light emitting diode display device (pixel size of $280{\times}280{\mu}m$) fabricated by micro-opto-electro-mechanical systems. Simulation results showed that the thermal resistances of the $3{\times}3$, $4{\times}4$, $5{\times}5$ arrays were $52^{\circ}C/W$, $69.7^{\circ}C/W$, and $84.3^{\circ}C/W$. The junction temperature was calculated by the peak wavelength shift method, which showed that the maximum value appears at the center pixel due to thermal crosstalk from neighboring pixels. The central temperature would be minimized with $40{\mu}m$ pixel pitch and $150{\mu}m$ substrate thickness as calculated by thermal modeling using finite element analysis. The modeling can be used to optimize parameters of highly integrated AlGaInP-based LED arrays fabricated by micro-opto-electro-mechanical systems technology.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.493-498
• /
• 2006

Superluminescent diodes (SLD) with the emitting wavelength of $1.55{\mu}m$ was fabricated on InGaAs quantum dot structure grown by MOCVD. The output power and 3-dB bandwidth at room temperature and continuous wave operation were 3 mw and 55 nm, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4649-4655
• /
• 2010

The aim of this study was to investigate the effect of flowing the industrial wastewater effluents into the K lake which is located in the A city on the eutrophication. The lake was modelled as a continuous stirred-tank reactor. Phosphorus and Chl-a concentration in the lake were calculated to $0.29\;/m^3$과 $4.0\;g/m^3$ at steady state, respectively. Those simulated concentrations were very close to the monitored mean concentration of the lake, indicating that the simulation could be used a tool for characterizing the lake. The non-steady state concentrations of the phosphorus and Chl-a were proposed as a function of time as well. Phosphorus loading ($L_p$) and depth to retention time ratio ($H/{\tau}w$) was calculated in order to analyze the current state of eutrophication. We proposed a strategy to change the lake from eutrophic to permissible oligotrophic state using a graph consisting of two variables, $L_p$ and $H/{\tau}w$.