• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1522-1528
• /
• 2008

The objective of this study was to develop a model for simulating gastric digestion in the pig. The model was constructed to include the chemical and physical changes associated with gastric digestion such as enzyme release, digestion product removal and gastric emptying. Digesta was collected from the stomach cannula of pigs to establish system parameters and to document the ability of the model to simulate gastric digestion. The results showed that the average pH of gastric digesta increased significantly from 2.47 to 4.97 after feed consumption and then decreased 140 min postprandial. The model described the decrease in pH within the pigs' stomach as $pH_t=5.182e^{-0.0014t}$, where t represents the postprandial time in minutes. The cumulative distribution function of liquid digesta was $V_t=64.509e^{0.0109t}$. The average pepsin activity in the liquid digesta was 317Anson units/mL. There was significant gastric emptying 220 min after feed consumption. The cybernetic dynamic system of gastric digestion was set according to the above data in order to compare with in vivo changes. The time course of crude protein digestion predicted by the model was highly correlated with observed in vivo digestion (r = 0.97; p = 0.0001), Model prediction for protein digestion was higher than that observed for a traditional static in vitro method (r = 0.89; p = 0.0001).

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.422-431
• /
• 2004

Water quality modeling was performed for the purpose of diagnosis and prediction of water quality in Gyoung Choen reservoir, using EUTR05/WASP Build model. WASP Builder is capable of visual display in window and it has an advantage of updating and modification for data. Field data of 1992, Spring, Summer, and Fall, were used to calibrate model and these results were validated using data of 2000, Spring, Summer, and Fall. The reservoir was divided into 4 epilimnion segments. Water quality system for modeling were consist of BOD, Chlorophyll-a, DO, $NH_3-N$, $NO_3-N$, T-N, $PO_4-P$, T-P. The results of water quality modelling using EUTR05/WASP Builder, a range of the Correlation for calibration of BOD, T-N, T-P, and Chlorophyll-a according to three seasons are 0.63~0.90, 0.81~0.97, 0.75~0.98, and 0.77~0.98 respectively. And the correlation between simulated and observed values for verification of BOD, T-N, T-P, and Chlorophyll-a according to three seasons are 0.93, 0.94, 0.81, and 0.80 respectively. Among the pollutant sources for a basin of the Gyoung Choen reservoir, generated amount of livestock is the highest and BOD, T-N, T-P of generated loading percentage are 94%, 81%, and 95%. So, we suppose that inflow load amount will decrease 50% and increase 50% only livestock about current load amount. If increasing load amount of livestock 50% in segment 2 and 3, BOD, T-N, and T-P simulated increasing to range of $0.02~0.15mg/{\ell}$, $0.029~0.08mg/{\ell}$, $0.011~0.029mg/{\ell}$ in comparison with current water quality

• Steel and Composite Structures
• /
• v.7 no.5
• /
• pp.405-419
• /
• 2007

This paper presents the development of some numerical models based on the results of laboratory tests performed on axially loaded RC columns strengthened with steel angles and strips. These numerical models consider the nonlinearity of the building materials and the effects of the contact interfaces between different materials. The results of the finite element models accurately describe the general behaviour of the strengthened columns. This study allows engineers to assess the relative importance of the mechanisms acting on the strengthened RC columns. Constructive recommendations are also provided in this paper.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.3
• /
• pp.496-510
• /
• 2007

This paper describes the use of a discrete mathematical model to represent the basic mechanisms of regulation of the bacteria E. coli in batch fermentation. The specific phenomena studied were the changes in metabolism and genetic regulation when the bacteria use three different carbon substrates (glucose, glycerol, and acetate). The model correctly predicts the behavior of E. coli vis-a-vis substrate mixtures. In a mixture of glucose, glycerol, and acetate, it prefers glucose, then glycerol, and finally acetate. The model included 67 nodes; 28 were genes, 20 enzymes, and 19 regulators/biochemical compounds. The model represents both the genetic regulation and metabolic networks in an integrated form, which is how they function biologically. This is one of the first attempts to include both of these networks in one model. Previously, discrete mathematical models were used only to describe genetic regulation networks. The study of the network dynamics generated 8 $(2^3)$ fixed points, one for each nutrient configuration (substrate mixture) in the medium. The fixed points of the discrete model reflect the phenotypes described. Gene expression and the patterns of the metabolic fluxes generated are described accurately. The activation of the gene regulation network depends basically on the presence of glucose and glycerol. The model predicts the behavior when mixed carbon sources are utilized as well as when there is no carbon source present. Fictitious jokers (Joker1, Joker2, and Repressor SdhC) had to be created to control 12 genes whose regulation mechanism is unknown, since glycerol and glucose do not act directly on the genes. The approach presented in this paper is particularly useful to investigate potential unknown gene regulation mechanisms; such a novel approach can also be used to describe other gene regulation situations such as the comparison between non-recombinant and recombinant yeast strain, producing recombinant proteins, presently under investigation in our group.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.147-148
• /
• 2006

Recently, due to increasing the application of power electronic equipment, harmonics generated from the non-liner load are fairly produced. Harmonics can cause a variety of problems such as the overheating of distribution transformer, the breakdown of device and communication interference. Interest about power quality decline of power system is very increased. In this paper, we are measured the harmonic voltage and current o( power system to analyze harmonic characteristics, and it is analyzed Total Harmonic Distortion(THD). Also, we Ere modeled power system using PSCAD/EMTDC. And it is analyzed harmonic voltage and current in steady-state. The study results have been indicated the utility about harmonics analysis and modelling for power system.

• Journal of Power System Engineering
• /
• v.12 no.2
• /
• pp.29-34
• /
• 2008

Bellows is widely used in many industrial fields as it provides a relatively simple means of absorbing mechanical shock, vibration and thermal deformation with flexibility. In this study, the inherent dynamic characteristics of curved bellows are numerically studied according to the variation of angle, curvature and crest density, etc. For these numerical studies, a parametric finite element modelling program of curved bellows is constructed using ANSYS APDL. The validity of numerical results obtained from ANSYS software is experimentally verified using the test model made by RP machine SLA 5000.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.337-339
• /
• 1995

A Linear Induction Machine(LIM) is the motor which is developed from an rotary induction machine. Usually, the electromagnetic field of an LIM is analyzed by Maxwell's equations. The structure of an LIM is different from a conventional rotary machine, an LIM has some particular characteristics such as the end effects. Hence, the mathematical analysis of an LIM is very complicated and the implementation of the equivalent model is difficult. In this paper, the dynamic equations and the equivalent model of a Double-sided short primary LIM(DLIM) is obtained by the winding function and a d-q theory. The validity of the proposed methodology is verified by numerical analysis.

• Journal of The Korean Astronomical Society
• /
• v.48 no.3
• /
• pp.165-175
• /
• 2015

We investigate physical properties of the nearby (∼ 7.5 pc) astrometric binary μ Cas in the context of standard evolutionary theory. Based on the spectroscopically determined relative abundances ([α/Fe] ≳ +0.4 dex, [Fe/H] ∼ −0.7 dex), all physical inputs such as opacities and equation of state are consistently generated. By combining recent spectroscopic analyses with the astrometric observations from the HIPPARCOS parallaxes and the CHARA array, the evolutionary model grids have been constructed. Through the statistical evaluation of the χ²-minimization among alternative models, we find a reliable evolutionary solution (M_A, M_B, t_age) = (0.74 M_⊙, 0.19 M_⊙, 11 Gyr) which excellently satisfies observational constraints. In particular, we find that the helium abundance of μ Cas is comparable with the primordial helium contents (Y_p ∼ 0.245). On the basis of the well-defined stellar parameters of the primary star, the internal structure and the p-mode frequencies have been estimated. From our seismic computation, μ Cas is expected to have a first order spacing ∆ν ∼ 169 μHz. The ultimate goal of this study is to describe physical processes inside a low-mass star through a complete modelling from the spectroscopic observation to the evolutionary computation.

• Journal of Mechanical Science and Technology
• /
• v.15 no.4
• /
• pp.473-481
• /
• 2001

By depicting the transfer of heat and combustion reaction to take place within thin gas layers close to the propellant surface burning in a steady-state fashion, a mathematical equation has been deduced to describe the burning rate of solid propellant as a function of initial grain temperature and chamber pressure. It has been also assumed that chemical reaction could take place in premixing-diffusing zone but were carried out mainly in the reaction-flame zone. All these phenomena taken place in each zone of combustion have been assumed to be steady-state. In the present investigation, the equation, γ=$\kappa$$.$(1/R(T(sub)i+C))(sup)n$.$exp(-E(sub)a/R(T(sub)i+C))(P/z) is being presented and it is compared with experimental data. The proposed model has been tested and evaluated vis-a-vis strand burner data for three different propellants based on CTPB, and it has been found that the deviation of the computed burning rates from the measured rates ranged up to 2%.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.201-208
• /
• 2005

Neuro-Fuzzy modeling approach is proposed to predict the dynamic behavior of a single-degree-of-freedom structure that is equipped with hybrid base isolation system. Hybrid base isolation system consists of friction pendulum systems (FPS) and a magnetorheological (MR) damper. Fuzzy model of the M damper is trained by ANFIS using various displacement, velocity, and voltage combinations that are obtained from a series of performance tests. Modelling of the FPS is carried out with a nonlinear analytical equation that is derived in this study and neuro-fuzzy training. Fuzzy logic controller is employed to control the command voltage that is sent to MR damper. The dynamic responses or experimental structure subjected to various earthquake excitations are compared with numerically simulated results using neuro-fuzzy modeling method. Numerical simulation using neuro-fuzzy models of the MR damper and FPS predict response of the hybrid base isolation system very well.