• 한국환경생태학회지
• /
• 제6권2호
• /
• pp.134-146
• /
• 1993

소백산 천동계곡 삼림의 식물군집구조분석을 위하여 20개소에 조사구(1개조사구당 20$\times$25m)를 설정하고 식생조사를 실시하여 얻은 자료에 대하여 TWINSPAM에 의한 classification과 DCA ordination기법을 적용하여 분석하였고 환경인자와 식생과의 관계를 CCA기법으로 분석하였다. TWINSPAN 과 DCA에 의하여 4개 군집인 소나무군집, 굴참나무-신갈나무-소나무군집, 신갈나무군집, 물푸레나무군집으로 분리되었다. 교목상층군의 천이는 소나무$\longrightarrow$신갈나무, 굴참나무$\longrightarrow$물푸레나무로 추정되었다. CCA에 의한 ordination분석에서는 토양내의 pH. 유기물함량, $Ca^{++}$함량, $Mg^{++}$함량과 제 1, 2축과의 상관성이 인정되었고, 유기물, $Mg^{++}$함량과 물푸레나무군집 그리고 pH와 소나무군집과의 상관관계가 인정되었다. 그러나 환경인자와 수종과의 관계는 명료하지 않았다.

• Journal of Plant Biotechnology
• /
• 제3권3호
• /
• pp.123-129
• /
• 2001

Electroporation of microcalli and embryonic axes of a Brazilian Indica rice cultivar was performed. Some parameters influencing the recovery of transformed callus have been defined through transient npt II expression. Such parameters included the presence of light during incubation of microcalli used as target for electroporation, heat shock at 45$^{\circ}C$, macerozyme pre-digestion of target tissues and the number of pulses during electroporation. Transgenic calli were obtained from embryonic axes after electroporation with plasmid pDM302, which encodes the gene phosphinotricin acetyl transferase (bar) under the control of Act-1 promoter. Integration of the introduced gene into the genome was demonstrated by Southern blot hybridization.

• Journal of Korean Dental Science
• /
• 제13권1호
• /
• pp.28-34
• /
• 2020

Purpose: The purpose of this study was to investigate the influence of different implant computer software on the accuracy of image registration between radiographic and optical scan data. Materials and Methods: Cone-beam computed tomography and optical scan data of a partially edentulous jaw were collected and transferred to three different computer softwares: Blue Sky Plan (Blue Sky Bio), Implant Studio (3M Shape), and Geomagic DesignX (3D systems). In each software, the two image sets were aligned using a point-based automatic image registration algorithm. Image matching error was evaluated by measuring the linear discrepancies between the two images at the anterior and posterior area in the direction of the x-, y-, and z-axes. Kruskal-Wallis test and a post hoc Mann-Whitney U-test with Bonferroni correction were used for statistical analyses. The significance level was set at 0.05. Result: Overall discrepancy values ranged from 0.08 to 0.30 ㎛. The image registration accuracy among the software was significantly different in the x- and z-axes (P=0.009 and <0.001, respectively), but not different in the y-axis (P=0.064). Conclusion: The image registration accuracy performed by a point-based automatic image matching could be different depending on the computer software used.

• Journal of Plant Biology
• /
• 제39권1호
• /
• pp.23-29
• /
• 1996

Morphology and reproduction of Polysiphonia atlantica Kapraun et J. Norris were studied on the basis of field and laboratory cultured materials collected from the coast of Korea. The plants consisted of prostrate and erect axes with an extremely soft flaccid texture. Axes were ecorticated and had four pericentral cells. The plants except for female gametophytes had few trichoblasts. Branches in the upper portion of the thallus grew to the same level, resulting in a flat-top form. Tetrasporangia were arranged in straight series. Spermatangial branches replaced whole trichoblasts and had a 1-2 celled serile tip. The procarp had a four celled carpogonial branch. After fertilization, the carpogonium contancted the surface of the supporting cell. The formation of the auxiliary cell from the supporting cell was somewhat delayed P. atlantica from Korea was similar to P. subtilissima Montagne in some features. However, the taxonomic differences between the two species were identified in the development of branches and the number of sterile cells at the tip of spermatangial branches.

• ALGAE
• /
• 제19권4호
• /
• pp.283-292
• /
• 2004

Psilothallia is a ceramiaceous red algal. genus that includes three species worldwide: P. dentate, P. siliculosa, and P. striate. The latter two species are limited to Australian waters, and P. dentate occurs in Japan. We here report the detailed morphology of P. dentate, and also determined plastid protein-coding psbA in P. dentate and putative relatives. Psilothallia dentate is distinguished by compressed thalli with alternate-distichous determinate branchlets, six periaxial cells, rhizoidal filaments in axes, cystocarps with 7-8 involucral filaments, spermatangia on branched filaments, and tetrahedrally divided tetrasporangia on branched filaments. Psilothallia dentate is also unusual in that cystocarps, spermatangial clusters, and tetrasporangial tufts are formed on short adventitious indeterminate branches arising on axils of determinate branchlets. The phylogenetic trees of psbA sequences show that P. dentata was nested in a monophyletic Glade comprising Ptilota, Neoptilota, and Plumaria. This result suggests that the taxonomic position of P. dentate may be transferred from the tribe Rhodocallideae to the Ptiloteae.

• 한국결정학회지
• /
• 제15권1호
• /
• pp.9-17
• /
• 2004

Trigonal system에 屬한 25個 space group들 中 18個는 hexagonal axes만을 나타내는 lattice letter p로 表示되고, 나머지 7個의 rhombohedral space groups R3(146), $R\={3}$(148), R32(155), R3m(160), R3c(161), $R\={3}m$(166), $R\={3}c$(167)은 첫째 3개의 lattice points (0, 0, 0), (2/3, 1/3, 1/3), (1/3, 2/3, 2/3)를 갖는 hexagonal cell in obverse setting과 둘째 primitive rhombohedral cell의 두 가지로 表示된다. 本 論文에서는 space group $R\={3}c$(167)에 대하여 論한 後 이 space group에 屬한 化合物인 tris(1,2,3,4-tetraphenylbuta-1,3-dienyl)cyclotriphosphazene, $C_{84}H_{60}N_3P_3$의 構造를 hexagonal 및 rhombohedral cell 의 양쪽으로 糾明하여 發表하였다.

• 한국분말재료학회지
• /
• 제10권2호
• /
• pp.129-135
• /
• 2003

Nanocrystalline powders of $MnFeP_{1-x}As_x$(x=0.45-0.6) have been synthesized by mechanochemical reaction at room temperature using high-energy ball milling from mixtures of Mn, Fe, P, and As Powders. It has been found that a mechanically induced self-propagating reaction (MSR) occurs within 2 hours of milling and it produces very fine polycrystalline powder having a hexagonal $Fe_2P$ structure. Further milling up to 24 hours did not change the crystalline and average particle sizes or the phase composition of the milling product. When x is 0.65, no reaction among the reactants has been observed even after 24 hours of milling. As the P content decreases in $MnFeP_{1-x}As_x$, the incubation time for the MSR has increased and the lattice constants in both a and c axes have changed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.77-80
• /
• 2002

In this paper, InP-based HBTs have been optimally designed by numerical simulation and fabricated by the self-aligned process. The structure of HBT was designed in terms of the current gain*f$_{max}$ for the base and f$_{T}$*f$_{max}$ for the collector. The designed structure produced the current gain of about 50 and the cutoff frequency and the maximum oscillation frequency of 87GHz and 2940Hz respectively. In addition, we present a study of the vertical and lateral etching of InP with the mask sides parallel to the principal crystallographic axes, [0101 and (001). This etching characteristics arc used to fabricate self-aligned HBT structures with reduced parasitic effects.s.s.s.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.436-436
• /
• 2011

Recently, spintronic devices with submicron structures are widely investigated to take advantage of their unique micromagnetic properties. In this work, we study the temperature dependence of exchange bias in bilayer anti-dot arrays made by depositing Co (40 nm)/Ni (5 nm) ferromagnetic bilayer on Si substrate to form anti-dot arrays with a diameter $1{\mu}m$. The anti-dot patterning was done only for the upper Co layer, while the Ni underlayer was kept unperforated. The temperature dependences of magnetoresistance (MR) and exchange bias were studied along magnetic easy and hard axes. The in-plane MR measurements were performed using a physical-property measurement system (PPMS ; Quantum Design Inc.) at various temperatures. The standard in-line four-point probe configuration was used for the electrical contacts. As temperature was varied, the MR data were obtained in which in-plane field (H=3 kOe) was applied in the directions along the hard and the easy axes with respect to the lattice plane. The temperature dependences of magnetic anisotropy and exchange bias were also studied along the magnetic easy and hard axes. As temperature decreases, the single peak splits into two peaks. While no exchange bias was observed along the magnetic easy axis, the exchange bias field steadily increased with decreasing temperature along the magnetic hard axis. These results were interpreted in connection with the magnetic anisotropy and the effect of the anti-dots in pinning domain wall motion along the respective direction.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.145-152
• /
• 1995

A general stiffener element which includes transverse shear deformation(TSD) is formulated using the p-version of finite element method. Hierarchic C"-shape functions, derived from Integrals of Legendre polynomials, are used to define the assembled stiffness matrix of the stiffener and plate on the basis of 5 D.0.F displacement fields. The stiffness matrix for the stiffener with respect to the local reference frame is transformed to the plate reference system by applying the appropriate transformation matrices in order to insure compatibility of displacements at the junction of the stiffener and plate. The transformation matrices which account for the orientation and the eccentricity effects of the stiffener with respect to the plate reference axes are used to find local behavior at the junction of the stiffener and the relative contributions of the plate and stiffener to the strength of the composite system. The results obtained by the p-version of the finite element method are compared with the results in literatures, especially those by the h-version software, MICROFEAP-II.P-II.