• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.223-227
• /
• 2005

The physical and mechanical properties of volcanic glass, which is distributed in the Samho area, South Korea were studied. Laboratory rock tests were carried out in order to obtain the various properties of rocks. Specific gravity, water content, absorption, porosity and wave velocity were measured for the physical properties. Uniaxial and triaxial compressive tests, Brazilian test and point load test were also performed for the mechanical properties. The tests of volcanic glass revealed that the apparent specific gravity, water content and absorption were 2.28, $1.67\%$ and $1.72\%$, respectively. Porosity $(3.87\%)$ was lower, whereas P-wave velocity (5330m/s) and S-wave velocity (2980 m/s) were relatively higher. Brazilian tensile strength ot 7.2MPa, and point load strength of 2.6MPa were among the mechanical properties of the rock. Uniaxial compressive strength (62.4MPa) estimated ken point load strength was very closed to the value (66.0MPa) from the uniaxial compressive test. Young's modulus and Poisson's ratio were E=43.2 GPa and v=0.28, respectively. Drawing the tangent line to Mohr-Coulomb failure criterion showed the cohesion of 20.1MPa and internal fraction angle of $28.6^{\circ}$.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.136-141
• /
• 2007

The effects of various concentrations (0.01% 0.02% both v/v) of a Turmeric (Curcuma aromatica Salab.) ethanol extract (CE) on the shelf life of tofu were investigated during tofu storage for 12 d at $25^{\circ}C$. The total number of bacteria in tofu containing 0.02% CE was ca. 100 1,000-fold lower than that of the control after this period Tofu containing CE had a lower pH then did control curd, but was higherin titratable acidity, during the storage period. Measurement of hardness, cohesiveness, and springiness of tofu containing CE were higher than those of control during storage. Each of these parameters of texture value improved (increased) with an increase in the concentration of CE in tofu The degree of whiteness of tofu did not differ between samples with or without CE. The yellowness of tofu increased after addition of CE. The overall acceptability of tofu containing CE was lower than that of control.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.30-36
• /
• 2019

Traditional cell culture(2-dimensional) is the method that provide a nutrient and environment on a flat surface to cultivate cells into a single layer. Since the cell characteristics of 2D culture method is different from the characteristics of the cells cultured in the body, attempts to cultivate the cells in an environment similar to the body environment are actively proceeding in the industry, academy, and research institutes. In this study, we will develop a technology to fabricate micro-structures capable of culturing cells on surfaces with various curvatures, surface shapes, and characteristics. In order to fabricate the hemispheric plastic structure(thickness $50{\mu}m$), plastic preform mold (hereinafter as "preform mold") corresponding to the hemisphere was first prepared by injection molding in order to fabricate a two - layer structure to be combined with a flat plastic film. Then, thermoplastic polymer dissolved in an organic solvent was solidified on a preform mold. As a preliminary study, we proposed injection molding conditions that can minimize X/Y/Z axis deflection value. The effects of the following conditions on the preform mold were analyzed through injection molding CAE, [(1) coolant inlet temperature, (2) injection time, (3) packing pressure, (4) volume-pressure (V/P). As a result, the injection molding process conditions (cooling water inlet temperature, injection time, holding pressure condition (V / P conversion point and holding pressure size)) which can minimize the deformation amount of the preform mold were derived through CAE without applying the experimental design method. Also, the derived injection molding process conditions were applied during actual injection molding and the degree of deformation of the formed preform mold was compared with the analysis results. It is expected that plastic film having various shapes in addition to hemispherical shape using the preform mold produced through this study will be useful for the molding preform molding technology and cast molding technology.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.2
• /
• pp.115-127
• /
• 1973

Leaf discoloration of IR667 lines (tropical) and leading locals (temperate) in fields was classified according to the probable causes and nutritional disorder due to soil reduction in 1972 was investigated. 1. The causes of leaf discoloration in IR667 were low air temperature, soil reduction, seed born, insect bite, nitrogen depression, overdose pesticide, strong wind, early senescence and unknown one. 2. Leaf discoloration due to soil reduction which has been called Sageumbyeong by famers, was caused by the heavy application of $Ca(OH)_2$, compost and poor drainage followed by Zn and K deficiency and Fe toxicity. 3. About 30 days after transplanting deficiency concentration of K and Zn in leaf blade appears to be less than 2.0% and 20ppm respectively, and greater than 200ppm, 500ppm, and 1.0% respectively for toxicity or excess of Fe, Mn and Ca. and in the shoot 2.4% for K, 30ppm for Zn and 800ppm for Fe. The value of K/Ca should be greaterthan 2.0 for health. 4. When plants were damaged by soil reduction the contents of N, P, Ca, Mg, Fe, Mn, Na in shoot were increased and those of K, Zn, Si were decreased. 5. IR667 lines show in shoot higher content of N, P, Ca, Mg, Si, Na, and lower content K, Zn, Fe, Mn and lower root activity than local leading varietles in either healthy or disieased case, indicating IR667 lines are likely more suseptible to soil reduction damage. 6. Normal soil was less than 6.5 of pH and greater than -50 mv of Eh, but pH of problem soil was ranged from 6.7 to 7.4 and Eh from -100 to -190. 7. The root activity (${\alpha}$-naphthylamine oxidation) decreased at early stage of soil redudtion damage, then increased with severity and at the end it decreased again, but IR667 lines showed always lower root activity than local ones.

• The Korean Journal of Pesticide Science
• /
• v.14 no.1
• /
• pp.65-71
• /
• 2010

This study was performed to investigate the inhibiting activity of etridiazole and thiophanate-mthyl on mycelial growth of Rhizoctonia solani and Pythium ultimum and the effect of inoculum density of each pathogen on the control efficacy of the mixture of etridiazole and thiophanate-methyl in a seedling assay test. In mycelial growth inhibition test, $EC_{50}$ values of etridiazole and thiophanate-methyl against R. solani were 15.87 and 9.34 ${\mu}g\;mL^{-1}$, while those were 0.2 and more than $500\;{\mu}g\;mL^{-1}$ against P. ultimum, respectively. Controlling activity of the mixture of etridiazole and thiophanate-methyl against damping-off of pepper and cucumber, caused by R. solani and P. ultimum was tested in a greenhouse. With the inoculation of R. solani, disease incidences of seedling in pepper were 73% and 95% at 0.5% and 1.0% of inoculum concentration, while in cucumber those were 55% and 62% at 1.0% and 2.0%. When P. ultimum was inoculated into soil by 2.0% of inoculum concentration, those in pepper and cucumber were 66.7% and 96.8%, respectively. The efficacy of the mixture was somehow affected by the concentration of R. solani. While each control value of the mixture was 94.4% and 90.7% in pepper and cucumber at low inoculum concentration (0.05%), the efficacy of the fungicide decreased in pepper and cucumber by 70.7% and 72.9% at high concentration of R. solani (0.1% in pepper and 0.5% in cucumber). However, the control value of the mixture was 100% in pepper and cucumber, irrespective of the inoculum concentration of P. ultimum, however, the increase of inoculum concentration in soil did not result in the decrease of the fungicide efficacy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1751-1758
• /
• 2012

Capillary blood sampling on the forearm reduces pain caused by skin puncture. The present study compared the blood glucose test results performed at different sampling sites of the forearm, finger, and vein to evaluate clinical validity of this alternative site blood sampling technique. Subjects numbered 555 including 61 diabetic patients participated to measure the glucose concentration on the finger ($G_F$) and the forearm ($G_A$) with a portable glucometer under overnight fasting state. Then, the venous glucose concentration ($G_V$) was measured in 514 subjects in less than 1 hour. The test results were analyzed by simple linear regression, intraclass correlation, and Passing-Bablok regression techniques. $G_A$ was highly correlated with $G_F$ or $G_V$ showing the correlation coefficients (r) of approximately 0.97 (P<0.0001) in the normal group. The patient group also resulted similarly high correlation with only slightly lower r value. The mean differences in glucose concentration were less than ${\pm}10mg/dL$ regardless of the sampling sites. Intraclass correlation coefficients were slightly smaller than r but very much similar in value in both groups. The 95% confidence intervals of the slope as well as the intercept in the Passing-Bablok regression analysis were < ${\pm}20%$ and < ${\pm}20mg/dL$, respectively, which were within the clinically acceptable ranges. These three statistical techniques introduced in the present study well demonstrated the consistency of $G_A$ with $G_F$ and $G_V$. Therefore, the forearm blood glucose test could be considered as clinically valid under fasting condition.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.105-112
• /
• 2014

Purpose: The aim of present investigation was to find out the influence of several times iatrogenic mobilization in the initial stage of implant installation on bone-implant osteointegration. Materials and methods: The experimental implants (3.75 mm in diameter, 8.0 mm in length) were made of commercially pure (Grade IV) titanium, and were treated with RBM ($MegaGen^{(R)}$: Ca-P) on lower 4.0 mm part. Only lower part of implant was inserted to bone and the implants were nonsubmerged. The 130 implants (two in each tibia) were inserted into the monocortical tibias of 33 rabbits which each weighed more than 3.5 kg (Female, New Zealand White). According to the removal torque interval, the groups were divided into 13 groups, group I (1 day), group II (1 day + 2 days), group III (1 day + 2 days + 3 days), group IV (1 day + 2 days + 3 days + 4 days), group V (2 days), group VI (2 days + 4 days), group VII (2 days + 4 days + 6 days), group VIII (2 days + 4 days + 6 days + 8 days), group IX (4 days), group X (4 days + 7 days), group XI (4 days + 7 days + 10 days), group XII (4 days + 7 days + 10 days + 14 days) and control group. In the control group, the removal torque was measured at 8 weeks with a digital torque gauge (Mark-10, USA). In the experimental groups, the removal torque was given once, twice, three times or four times by experiment design before the final removal torque and the value was measured each time. The implants were then screwed back to their original positions. All the experimental groups were given a final healing time of 8 weeks after placement, in which values were compared with the control groups and the 1st, 2nd, 3rd or 4th removal torque values in each experimental group. Results: In comparison of the final removal torque tests among experimental groups, the removal torque value of experimental groups except group XII were not statistically different that of control group. And the values of group I and II were significantly higher than the values of group VI, VIII, X, XI, and XII. In addition, the values of group III, IV, and V were significantly higher than group XI and XII. In comparison of the removal torque in the each experimental group, the final removal torque were significantly higher in all groups except group VIII, X, XI, and XII. Conclusion: If sufficient healing time was allowed, a few mobilization of fixture at the very early stage after the implant placement in the rabbits didn't interrupt the final bone to implant osseointegration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.440-443
• /
• 2002

Present1y the X-Ray diagnosis system is a real condition that is changing by digital ways in it's existent analog ways. This digital radiation detector is divided by the direct method and the indirect method. The indirect method of applied voltage has special qualities that the resolution is low than direct method by diffusion effect that happens. The conversion process ( radiation${\rightarrow}$visible ray${\rightarrow}$electrical signal of two times, has shortcomings that the energy conversion efficiency of electrical signal is low. The direct method has shortcomings that need strong electric fie1d to detect electrical signal efficiently. This research achieved to develop digital detector of the Hybrid method that have form that mixes two ways to supplement shortcoming of direct. indirect method. A studied electrical characteristic by Iodine's Mixture ratio change is added to selenium in the detector which has a multi-layer structure (Oxybromide + a-Se). There are 8 kinds of Manufactured compositions to amorphous selenium Iodine each 30ppm, 100ppm, 200 ppm, 300ppm, 400ppm, 500ppm, 600ppm, 700ppm by a doped photoconductor through a vacuum thermal evaporation method. The phosphor layer is consisted of Oxybromide ($BrO_2$) which uses optical adhesives multi-layer structure. The manufactured compositions calculates and compares Net Charge and signal to noise ratio measuring Photocurrent about Darkcurrent and X-ray. When doped Iodine Mixture ratio is 500ppm to the multi-layer structure (Oxybromide + a-Se), applied voltage of $3V/{\mu}m$, leakage current of compositions $2.61nA/cm^2$ and net charge value by 764pC/$cm^2$/mR then the best result appeared.

• Journal of Ginseng Research
• /
• v.17 no.1
• /
• pp.52-60
• /
• 1993

Panax ginseng has been extensively used in the traditional oriental medicine as a restorative, tonic and Prophylactic agent. Recently, several reports regarding to anticancer effects of Panax ginseng has accumulated. These studies emphasized the fact that the anticancer activities might be due to a glycoside group called ginsenoside or pan.u saponin which has a water soluble characteristic. However, the authors and collaborates demonstrated that a highly lipid soluble component in extract of Panax ginseng roots contains a considerable cytotoxic activities against marine leukemic cells (L1210, P388) and human censer cells (HRT-18, HT-29, HCT48). This study was devised to observe the cytotoxic activities of Petroleum-ether extract of Panax giuseng roots (crude GBD and its Partially Purified fraction from silicic acid column chromatography (7 : 3 GX) against sarcoma-180 (5-180) and Walker carcinosar- coma 256 (Walker 256) in vivo, and murine leukemic Lymphocytes (L1210) and human rectal cancer cells (HRT-18) and human colon cancer cells (HT-29 and HCT48) in vitro. Each cell-line was cultured in medium containing serial concentration of the crude GX or 7 : 3 GX in vitro. A highly lipid soluble compound in the extract of Panax ginseng root was cytocidal to murine leukemic cells and human colon and rectal cancer cells in vitro. In the meantime, ginseng saponin derivatives did not have cytotoxic effects at its corresponding concentration. The growth rates of the cancer cells in medium containing ginseng extracts were inhibited gradually to a significant degree roughly in proportion to the increase of the extract concentration. The cytotoxic activity of 7 : 3 GX was about 3 times more potent than that of crude GX, one unit of cytotoxic activity against L1210 cells being equivalent to 2.54 Ug and 058 Ug for the crude GX and 7 : 3 GX, respectively. The Ri value of the active compound on silica- gel thin layer chromatography with petroleum-ether/ethyl ether/acetic acid mixture (90 : 10 : 1, v/v/v) as a developing so lvent was 053. While, the Panaxydol and Panaxynol as active compounds were purified from Petroleum-ether extract of Panax ginseng root by Drs. Ahn and Kim, and author found out that the one unit of cytotoxic activity of the Panaxydol and Panaxynol against L1210 cells being equivalent to 056 Ug and 0.3918 respectively. The survival times of mice inoculated with S-180 cells were extended about 1.5 to 2 times by the 7 : 3 GX treatment compared with their control group. The significantly decreased hemoglobin values of rats after inoculation with Walker 256 were recovered to normal range by oral administration of the crude Gt The synthetic levels of protein, DNA and RNA in human colon and rectal cancer cells were significantly diminished by treatment with the crude GX, which can explain a part of the origin of its anticancer activity.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.173-182
• /
• 1996

An experimental research was carried out to investigate the effect of thc compressive strength of concrete on the stirrup effectiveness in shear behavior of concrete beams. For this purpose. total 24 beams of section dimension of $300{\times}600mm$ were tested: 4 specimens without web reinforcement and 20 specimens with web reinforcement in the form of vertical stirrups. Main variables were two levels(norma1 and high strength) of the compressive strength of concrete and six types of t h e shear rcinfor.cement ratios. Prior to experiment, for given sections and assumed material constants, the reference shear reinforcement ratio(${\rho}_vACI$) which leads to the flexure failure using the provisions of the ACI Building Code(AC1 318-95) was calculated. and the shear reinforcement ratios were relatively selected from the value of ${\rho}_vACI$. From test results, it was shown that thc safety factor of ACI eyuation for p1,ediction of shear strength was decreased with increasing the compressive strength of concrete in beams without stirrups. However. it was observed that as the amount of' stirrup is increased, the safety factor for high strength conci,ete beams with high stirrup ratio is ensured more than that for normal strength concrete beams. Therefore i t appears that the stirrup effectiveness of high strength concrete beams is greater than that of normal strength concrete beams.