• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.257-263
• /
• 2021

This study derives the relative cross-section for the natW(p,xn)176Re nuclear reaction by measuring the gamma rays generated from the nuclear reaction with natural tungsten using a 100 MeV linear accelerator of the Korea Multi-purpose Accelerator Complex in the Korea Atomic Energy Research Institute. In general, research on isotopes with a short half-life always shows a tendency that the intensity of radioactivity decreases rapidly within a short period of time, making it very difficult to measure itself. In particular, 176Re is one of the relatively short radionuclides with a half-life of 5.3 minutes. In this study, 109.08 keV gamma rays generated from the 176Re isotope having such a short half-life were measured using a high-purity Ge detector(HPGe detector). The obtained relative measurements were the results in the 8 to 14 MeV proton energy domain published by Richard G. in 1967, and the TENDL-2019 value, which was the result of A. J. Koning in 2019, which evaluated the nuclear reaction cross-section by calculation based on this comparative analysis was performed. The results of this study are expected to be usefully applied to the design of nuclear fusion reactor which is known as future energy sources, elements ratio for the nuclear synthesis of astrophysics.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.192-199
• /
• 2004

In this work the production of glutathione (GSH) by yeast Saccharomyces cerevisiae and the monitoring of the process were studied. In shaking culture the production of GSH was high at initial pH value of 4 and at temperature of 30$^{\circ}C$. But when L-cysteine was added to the culture medium at the beginning of the cultivation, the productivity of GSH was low. In case 0,5% (v/v) of L-cysteine, glycine and glutamic acid were introduced to the culture medium in the exponential cell growth phase, high concentration of GSH (about 90 mg/L) was produced in the bioreactor. A fed-batch operation with stepwise glucose feeding strategy allowed to produce 102 mg/L of GSH. The cultivation processes were on-line monitored by a 2-dimensional fluorescence sensor. A few off-line data such as cell growth, cystein concentration, phosphate concentration and GSH productivity could be well correlated to the fluorescence intensity of some combinations of excitation and emission wavelengths.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.10a
• /
• pp.119-119
• /
• 2003

Plasma polymerized organic thin films were deposited on Si(100) glass and Copper substrates at 25 ∼ 100 $^{\circ}C$ using cyclohexane and ethylcyclohexane precursors by PECVD method. In order to compare physical and electrochemical properties of the as-grown thin films, the effects of the RF plasma power in the range of 20∼50 W and deposition temperature on both corrosion protection efficiency and physical properties were studied. We found that the corrosion protection efficiency (P$\_$k/), which is one of the important factors for corrosion protection in the interlayer dielectrics of microelectronic devices application, was increased with increasing RF power. The highest P$\_$k/ value of plasma polymerized ethylcyclohexane film (92.1% at 50 W) was higher than that of the plasma polymerized cyclohexane film (85.26% at 50 W), indicating inhibition of oxygen reduction. Impedance analyzer was utilized for the determination of I-V curve for leakage current density and C-V for dielectric constants. To obtain C-V curve, we used a MIM structure of metal(Al)-insulator(plasma polymerized thin film)-metal(Pt) structure. Al as the electrode was evaporated on the ethylcyclohexane films that grew on Pt coated silicon substrates, and the dielectric constants of the as-grown films were then calculated from C-V data measured at 1㎒. From the electrical property measurements such as I-V ana C-V characteristics, the minimum dielectric constant and the best leakage current of ethylcyclohexane thin films were obtained to be about 3.11 and 5 ${\times}$ 10$\^$-12/ A/$\textrm{cm}^2$ and cyclohexane thin films were obtained to be about 2.3 and 8 ${\times}$ 10$\^$-12/ A/$\textrm{cm}^2$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1427-1439
• /
• 2008

The quality of track-bed fills of railways has been controlled by field measurements of density (${\gamma}_d$) and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures is that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of $OMC{\pm}2%$ as well as the p-wave velocity.

• KSBB Journal
• /
• v.28 no.2
• /
• pp.65-73
• /
• 2013

This study aimed to investigate the enzymatic hydrolysis of mannitol using Viscozyme$^{(R)}$ L, Celluclast$^{(R)}$ 1.5 L, Saczyme$^{(R)}$, Novozym$^{(R)}$, Fungamyl$^{(R)}$ 800 L, Driselase$^{(R)}$ Basidiomycetes sp., and Alginate Lyase, and to optimize of reaction conditions for production of reducing sugar. Response surface methodology (RSM) based on central composite rotatable design was used to study effects of the independent variables such as enzyme (1-9% v/w), reaction time (10-30 h), pH (3.0-7.0) and reaction temperature ($30-70^{\circ}C$) on production of reducing sugar from mannitol. The coefficient of determination ($R^2$) of $Y_1$ (yield of reducing sugar by Viscozyme$^{(R)}$ L) and $Y_3$ (yield of reducing sugar by Saczyme$^{(R)}$) for the dependent variable regression equation was analyzed as 0.985 and 0.814. And the p-value of $Y_1$ and $Y_3$ showing 0.000 and 0.001 within 1% (p < 0.01), respectively, was very significant. The optimum conditions for production of reducing sugar with Viscozyme$^{(R)}$ L were 9.0 % (v/w) amount of enzyme, 30.0 hours of reaction time, pH 4.5 and $30.0^{\circ}C$ of reaction temperature, and those with Saczyme$^{(R)}$ were 9.0% (v/w) of amount of enzyme dosage, 30.0 h of reaction time, pH 7.0 and $30.0^{\circ}C$ of reaction temperature, consequently, the predicted reducing sugar yields were 22.5 and 27.9 mg/g-mannitol, respectively.

• Design & Manufacturing
• /
• v.14 no.3
• /
• pp.8-16
• /
• 2020

In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.

• Microbiology and Biotechnology Letters
• /
• v.25 no.1
• /
• pp.56-61
• /
• 1997

An alkaline protease producing microorganism was isolated from korean traditional Meju and identified as Scopulariopsis brevicaulis. The optimum culture condition of Scopulariopsis brevicaulis for the production of alkaline protease was as follow: 2% soluble starch, 0.2$, tryptophan, 0.1% (NH$_{4}$) $_{2}$S$_{2}$O$_{8}$ 0.2% NaHPO$_{4}$, pH 7.5, 35$\CIRC $C. The optimum pH and temperature for the enzyme activity of alkaline protease producing Scopulariopsis brevicaulis were pH 9.0 and 50$\circ $C, respectively. The enzyme was relatively stable at pH 6.0~11.0 and at temperature below 40$\circ $C. The activity of the enzyme was inhibited by Hg$^{2+}$ whereas Cu$^{2+}$ gave rather activating effects on the enzyme activity. Phenylmethanesulfonyl fluoride inhibited the enzyme activity. This result indicates that serine is very important role in this enzyme. Km value for casein was 1.2410$^{4}$ M/L, V$_{max}$ value for casein was 25.99 $\mu $g/min. This enzyme hydrolyzed casein more rapidly than the hemoglobin.

• Journal of Environmental Health Sciences
• /
• v.29 no.2
• /
• pp.23-28
• /
• 2003

To evaluate the effect of cyclohexane(CH) treatment on the liver cytochrome P-450 dependent aniline hydroxylase(CYPdAH) activity in alcohol-pretreated animals, CH(1.56 g/kg body weight) was intraperitoneally administered to Sprague-Dawley male rats, which had been drunk 15％ alcohol in distilled water for 1,3 and 6 weeks. CH was injected to rats 4 times every other day and the animals were sacrificed at 24 hours after injection of CH. In the alcohol-pretreated rats, liver injuries were not demonstrated on the basis of the liver weight per body weight, the levels of serum alanine aminotransferase and hepatic microsomal glucose-6-phosphatase activities. By the CH treatment, alcohol-pretreated animals showed the significantly increased activity of hepatic microsomal CYPdAH. Concomitantly $V_{max}$ value in CYPdAH was more increased, whereas $K_{M}$ value more decreased in alcohol-pretreated animals by the treatment of CH. In conclusion, the increasing cause of microsomal CYPdAH in CH-treated rats pretreated with alcohol may be due to induction of enzyme protein in rat liver.r.r.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.886-895
• /
• 2013

This study was conducted to explore the antioxidant potential and functional value of guava (Psidium guajava L.) powder in muscle foods. Guava powder was used as a source of antioxidant dietary fibre in sheep meat nuggets at two different levels i.e., 0.5% (Treatment I) and 1.0% (Treatment II) and its effect was evaluated against control. Guava powder is rich in dietary fibre (43.21%), phenolics (44.04 mg GAE/g) and possesses good radical scavenging activity as well as reducing power. Incorporation of guava powder resulted in significant decrease (p<0.05) in pH of emulsion and nuggets, emulsion stability, cooking yield and moisture content of nuggets while ash and moisture content of emulsion were increased. Total phenolics, total dietary fibre (TDF) and ash content significantly increased (p<0.05) in nuggets with added guava powder. Product redness value was significantly improved (p<0.05) due to guava powder. Textural properties did not differ significantly except, springiness and shear force values. Guava powder was found to retard lipid peroxidation of cooked sheep meat nuggets as measured by TBARS number during refrigerated storage. Guava powder did not affect sensory characteristics of the products and can be used as source of antioxidant dietary fibre in meat foods.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.269-277
• /
• 1998

This in vitro study compared the microleakage of 4 lining conditions when used with Gallium alloy GF II and Valiant PhD. Class V cavity was prepared on both buccal and lingual surface of 80 extracted human premolar & molar teeth with one margin in enamel and another in dentin. Before restoration, prepared cavities were applied to no-liner, cavity varnish, Scotchbond multipurpose, and Superbond D-liner II plus according to manufacture's instructions. The restored teeth were stored in saline for 1 week, then thermocycled for 100 times, stained with 0.5% basic fuchsin dye for 1 day, sectioned, and observed using a light microscope. Following results were obtained. 1. The leakage value of Superbond-lined group showed significantly lower than that of nolined group on both margins of Valiant PhD(p<0.05). 2; There was no significant difference between the 4 lining conditions in Gallium alloy GF II (p>0.05). 3. When We make a comparison between Gallium alloy GF II and Valiant PhD under same lining conditions, the microleakage value of Gallium alloy GF II showed lower than that of Valiant PhD on occlusal & gingival margin(p<0.05) except for Superbond-lined group(p>0.05).