• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.342-345
• /
• 2002

A new lateral trench electrode IGBT with p+ diverter was Proposed to suppress latch-up of LTIGBT. The p+ diverter was placed between the anode and cathode electrode. The latch-up of LTEIGBT with a p+ diverter was effectively suppressed to sustain an anode voltage of 8.7V and a current density of 1453A/$\textrm{cm}^2$ while in the conventional LTIGBT, latch-up occurred at an anode current density of 540A/$\textrm{cm}^2$. And the forward blocking voltage of the proposed LTEIGBT with a p+ diverter was about 140V. That of the conventional LTIGBT of the same size was no more than 105V. When the gate voltage is applied 12V, the forward conduction currents of the Proposed LTEIGBT with a p+ diverter and the conventional LIGBT are 90mA and 70mA, respectively, at the same breakdown voltage of 150V.

• Journal of applied mathematics & informatics
• /
• v.42 no.1
• /
• pp.1-14
• /
• 2024

Let G = (V, E) be a (p, q) graph. Define $$\begin{cases}\frac{p}{2},\:if\:p\:is\:even\\\frac{p-1}{2},\:if\:p\:is\:odd\end{cases}$$ and L = {±1, ±2, ±3, ···, ±ρ} called the set of labels. Consider a mapping f : V → L by assigning different labels in L to the different elements of V when p is even and different labels in L to p - 1 elements of V and repeating a label for the remaining one vertex when p is odd.The labeling as defined above is said to be a pair difference cordial labeling if for each edge uv of G there exists a labeling |f(u) - f(v)| such that |Δ_f1 - Δ_f^c1| ≤ 1, where Δ_f1 and Δ_f^c1 respectively denote the number of edges labeled with 1 and number of edges not labeled with 1. A graph G for which there exists a pair difference cordial labeling is called a pair difference cordial graph. In this paper we investigate the pair difference cordial labeling behavior of subdivision of some graphs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.447-450
• /
• 2000

In this paper, we report a fabrication of InP-based microstructurs for III-V compound semiconductor micromachining. Vertical liquid phase epitaxy(LPE) system was used in order to grow the Inp/InGaAsP/InP layers. The thicknesses of InP top-layer and InGaAsP were 1$\mu\textrm{m}$ and 0.4$\mu\textrm{m}$ respectively. The fabrication of InGaAsP microstructures involves front side bulk micromachining. The experimental result showed the beams must be carefully aligned in the <110> direction since the lateral etching of the beam in the <110> direction is more faster than that of the beam in the <100> direction.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.183-187
• /
• 2015

We use ALLWISE data release W1- and W2-band epoch photometry collected by the Wide-Field Infrared Survey Explorer (WISE) to determine slopes of the period-luminosity relations for RR Lyrae stars in 15 globular clusters in the corresponding bands. We further combine these results with V- and K-band photometry of Galactic field RR Lyrae stars to determine the metallicity slopes of the log $P_F-[Fe/H]-M_K$, log $P_F-[Fe/H]-M_{W1}$, and log $P_F-[Fe/H]-M_{W2}$ period-metallicity-luminosity relations. We infer the zero points of these relations and determine the kinematical parameters of thick-disk and halo RR Lyraes via statistical parallax, and estimate the RR Lyrae-based distances to 18 Local-Group galaxies including the center of the Milky Way.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.498-504
• /
• 2003

This Study was carried out to investigate the optimal mycelial growth of Pholiota nameko. The optimal medium for the mycelial growth was ME medium. The optimal temperature and pH were $25^{\circ}C$$\pm$1 and 5.5, respectively. The modified optimal medium compositions were glucose 3% (w/v), malt extract 0.25% (w/v), yeast extract 0.25% (w/v), $KH_2PO_4$ 0.046% (w/v), $K_2HPO_4$ 0.1% (w/v), $MgSO_4$ㆍ$7H_2O$ 0.05% (w/v). From the result of experiments on the optimal temperature, pH and nutritional requirements, the mycelial growth of modified optimal medium was higher than that of ME medium.

• Biomedical Science Letters
• /
• v.8 no.3
• /
• pp.143-154
• /
• 2002

The effect of cardiopulmonary bypass (CPB) on cerebral physiology during heart surgery remains incompletely understood. This study was carried out to investigate changes of cerebral metabolism and the association between the changes and clinical factors during heart surgery. Seventy adult patients (n=70) scheduled for elective cardiac surgery were participated in the present study. Middle cerebral artery blood flow velocity (V$_{MCA}$), cerebral arteriovenous oxygen content difference (C(a-v)O$_2$), cerebral oxygen extraction (COE), and modified cerebral metabolic rate for oxygen (MCMRO$_2$) were measured during six phases of the operation; Pre-CPB, CPB-10 min, Rewarm-1 (nasopharyngeal temperature 34$^{\circ}C$), Rewarm-2 (nasopharyngeal temperature 37$^{\circ}C$), CPB-off, and Post-OP (at skin closure after CPB-off). Each relationship of age, arterial blood gas parameters, or other variables to V$_{MCA}2$, C(a-v)O$_2$, COE, or MCMRO$_2$ was evaluated. V$_{MCA}$ increased (P<0.0001) whereas C(a-v)O$_2$ decreased (P<0.01) throughout the five phases of the operation compared to Pre-CPB value (control). COE diminished at CPB-10, Rewarm-1, and CPB-off (P<0.05) while MCMRO$_2$ reduced at CPB-10 and Rewarm-1 (P<0.05) compared to Pre-CPB value. Positive correlation was found between age and cerebral metabolic parameters (V$_{MCA}$, C(a-v)O$_2$, COE, or MCMRO$_2$) during CPB (range r=0.24 to 0.38, p<0.05). Four cerebral metabolic parameters had partially negative or positive correlation with arterial blood gas parameters and other variables (arterial blood pH, $O_2$ tension, $O_2$ content, $CO_2$ tension, blood pressure, blood flow, temperature, or hematocrit) during the operation. In conclusion, CPB led to marked alterations of cerebral metabolism and age, pH, and $CO_2$ tension profoundly influenced the changes during cardiac surgery.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• Journal of radiological science and technology
• /
• v.32 no.2
• /
• pp.169-175
• /
• 2009

This study examined 40 healthy volunteers had been tested for their gallbladder (GB) volume and wall thickness by a real time ultrasonography before and after a meal. The results are as follows : 1. The mean values of GB volume were 47.40. (SD 9.05) for male, 35.72. (SD 8.30) for female. 2. The mean value of wall thickness of GB was 2.3 mm (SD 0.3, male, SD 0.5, female). 3. The mean ejection-fraction rates of GB result in 67.20% for male, 63.95% for female. 4. The values of GB volume had significant negative correlations (v = -.487, p < .000, male, v = -.509, p < .000, female) within 4 hours after a meal and significant positive correlations (v = .434, p < .000, male, v = .440, p < .000, female) afterward. 5. The wall thicknesses of GB were significant positive correlations (t = .310, p < .002, male, t = .116, p < .246, female) within 3 hours after a meal and significant negative correlations (t = -.288, p < .010, male, t = -.126, p < 7.10, female) afterward. 6. The relationship between volume and wall thickness of GB showed significant negative correlation.

• Bulletin of the Korean Mathematical Society
• /
• v.32 no.2
• /
• pp.139-144
• /
• 1995

Two subgroups U and V of a finite group G are called to be p-conjugate for a prime p if a Sylow p-subgroup of U is conjugate to a Sylow p-subgroup of V. This concept of p-conjugacy also makes sense for some infinite groups with a reasonable Sylow theory.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.198-203
• /
• 2011

The electronic structure of ferrimagnetic spinel oxide of $FeV_2O_4$ has been investigated by employing soft x-ray absorption spectroscopy (XAS) and soft x-ray magnetic circular dichroism (XMCD). The Fe 2p and V 2p XAS spectra show that the valence states of Fe and V ions are ${\sim}Fe^{2.3+}$ mixed-valent states and ${\sim}V^{3+}$ states, respectively. In Fe 2p XMCD spectra, finite XMCD signals are observed for divalent $Fe^{2+}$ states only, but not for $Fe^{3+}$ states. This finding indicates that the magnetic moments of $Fe^{2+}$ ions are ordered ferromagnetically but that those of $Fe^{3+}$ ions are cancelled, implying that $Fe^{2+}$ ions play an important role in determining magnetic properties of $FeV_2O_4$.