• The Korean Journal of Pharmacology
• /
• v.17 no.1 s.28
• /
• pp.17-25
• /
• 1981

No evidence has accumulated that lead compound is an essential component for biological function in animals. Lead is absorbed primarily through the epithelial mucosal cells in duodenum and the absorption can be enhanced by the substances which bind lead and increase its solubility. Iron, zinc and calcium ions, however, decrease the absorption of lead without affecting its solubility, probably by competing for shared absorptive receptors in the intestinal mucosa. Therefore, the absorption of lead is increased in iron deficient animals. Lead shows a strong affinity for ligands such as phosphate, cysteinyl and histidyl side chains of proteins, pterins and porphyrins. Hence lead can act on various active sites of enzymes, inhibiting the enzymes which has functional sulfhydryl groups. lead inhibits the activity of ${\delta}$-aminolevulinic acid dehydratase for the biosynthesis of hemoproteins and cytochrome, which catalyzed the synthesis of monopyrrole prophobilinogen from ${\delta}$-aminolevulinic acid. Accordingly lead decrease hepatic cytochrome p-450 content, resulting an inhibition of the activity of demethylase and hydroxylase in liver. Little informations are available on the effect of lead on digestive system although the catastrophic effects of lead intoxication are well documented. The present study was, therefore, attempted to investigate the effect of lead on pancreaticobiliary secretion in rats. Albino rats of both sexes weighing $170{\sim}230g$ were used for this study. The animals were divided into one control and three treated groups, i.e., control (physiologic saline 1.5ml/kg i.p.), lead acetate $(l0{\mu}mole/kg/day\;i.p.)$, $Pb(Ac)_2$ and EDTA$(each\;10{\mu}mole/kg/day\;i.p.)$, $Pb(Ac)_2$ and $FeSO_4(each\;l0{\mu}mole/kg/day\;hp)$. The pancreatico-biliary juice was collected under urethane anesthesia, and activities of amylase and lipase were determined by employing Sumner's and Cherry and Crandall's methods. The summarized results are follows. 1) In the experiment for acute toxicity of lead acetate, 20% of mortality was observed in rat treated with lead acetate as well as inhibition of the activity of amylase in the juice at the 3 rd day of the treatment. 2) No increases in body weight were observed in rats treated with lead acetate, while in control group the significant increases were observed. However, the body weights of animals were increased in the group lead acetate plus EDTA or $FeSO_4$. 3) Lead acetate decreased significantly the volume of pancreatico-biliary juice whereas additional treatment of EDTA and $FeSO_4$ prevented it. 4) Total activity of amylase was markedly reduced due to lead acetate treatment, but no change was showed following additional treatment with EDTA and $FeSO_4$. 5) No changes in the cholate and lipase output were observed in rats treated with lead acetate as compared with that of control rats. 6) Increase in bilirubin output in rats treated with lead acetate was shown on the 2nd and 3rd weeks treatment. 7) In the case of in vitro experiment, lead acetate also markedly inhibited release of amylase from pancreatic fragment. 8) Histologic finding indicated that acini vacuolation was induced in the pancreatic tissue of rat treated with lead acete. From the above results, it might be concluded that lead acetate decreases the volume of pancreatico-biliary secretion and inhibits the amylase activity, by acting directly on pancreatic cells.

• Journal of Life Science
• /
• v.31 no.9
• /
• pp.818-826
• /
• 2021

5-Aminolevulinic acid phosphate (5-ALA-p) is a substance obtained by eluting 5-ALA (a natural delta amino acid) with aqueous ammonia, adding phosphoric acid to the eluate, and then adding acetone to confer properties suitable for use in photodynamic therapy applications. However, its pharmacological efficacy, including potential mechanisms of antioxidant and anti-inflammatory reactions, remains unclear. This study aimed to investigate the effects of 5-ALA-p on oxidative and inflammatory stresses in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells. Our data showed that 5-ALA-p significantly inhibited excessive phagocytic activity via LPS and attenuated oxidative stress in LPS-treated RAW 264.7 cells. Furthermore, 5-ALA-p improved mitochondrial biogenesis reduced by LPS, suggesting that 5-ALA-p restores mitochondrial damage caused by LPS. Additionally, 5-ALA-p significantly suppressed the release of nitric oxide (NO) and pro-inflammatory cytokines, such as tumor necrosis factor α (TNF-α), interleukin (IL)-1β, and IL-6, which are associated with the inhibition of inducible NO synthase and respective cytokine expression. Furthermore, 5-ALA-p reduced the nuclear translocation of nuclear factor-kappa B (NF-κB) and inhibited phosphorylation of mitogen-activated protein kinases (MAPKs), indicating that the anti-inflammatory effect of 5-ALA-p is mediated through the suppression of NF-κB and MAPK signaling pathways. Based on these results, 5-ALA-p may serve as a potential candidate to reduce inflammation and oxidative stress.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.9
• /
• pp.1225-1233
• /
• 2009

Fat composition of beef, taken here to mean marbling, can be manipulated by time on feed, finishing diet, and breed type. These three factors also strongly influence the fatty acid composition of beef. Both the amount of marbling and the concentration of monounsaturated fatty acids (MUFA) increase with time on feed in grain-fed and pasture-fed cattle, but much more dramatically in grain-fed cattle. High-concentrate diets stimulate the activity of adipose tissue stearoyl-CoA desaturase (SCD), which is responsible for the conversion of saturated fatty acids (SFA) to their $\Delta{9}$ desaturated counterparts. Also, grain feeding causes a depression in ruminal pH, which decreases those populations of ruminal microorganisms responsible for the isomerization and hydrogenation of polyunsaturated fatty acids (PUFA). The net result of elevated SCD activity in marbling adipose tissue and depressed ruminal isomerization/hydrogenation of dietary PUFA is a large increase in MUFA in beef over time. Conversely, pasture depresses both the accumulation of marbling and SCD activity, so that even though pasture feeding increases the relative concentration of PUFA in beef, it also increases SFA at the expense of MUFA. Wagyu and Hanwoo cattle accumulate large amounts of marbling and MUFA, and Wagyu cattle appear to be less sensitive to the effects of pastures in depressing overall rates of adipogenesis and the synthesis of MUFA in adipose tissues. There are small differences in fatty acid composition of beef from Bos indicus and Bos taurus cattle, but diet and time on feed are much more important determinants of beef fat content and fatty acid composition than breed type.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.1
• /
• pp.6-11
• /
• 2011

The $BaHfO_3$ (BHO) buffer layer on the IBAD MgO template was turned to be effective for a successful fabrication of $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) films with high critical current density ($J_c$). Both the BHO buffer layers and GdBCO films were prepared by pulsed laser deposition (PLD). The effects of the PLD conditions, including substrate temperature ($T_s$), oxygen partial pressure ($PO_2$), and deposition time on the in-plane texture, surface roughness, and microstructures of the BHO buffer layers on the IBAD MgO template were systematically studied for processing optimization. The c-axis oriented growth of BHO layers was insensitive to the deposition temperature and the film thickness, while the in-plane texture and surface roughness of those were improved with increasing $T_s$ from 700 to $800^{\circ}C$. On the optimally processed BHO buffer layer, the highest $J_c$ value (77 K, self-field) of 3.68 $MA/cm^2$ could be obtained from GdBCO film deposited at $780^{\circ}C$, representing that BHO is a strong candidate for the buffer layer on the IBAD MgO template.

• Steel and Composite Structures
• /
• v.17 no.4
• /
• pp.405-429
• /
• 2014

In this paper, it is aimed to determine the structural behavior of suspension bridges considering construction stages and different soil conditions. Bosporus Suspension Bridge connecting the Europe and Asia in Istanbul is selected as an example. Finite element model of the bridge is constituted using SAP2000 program considering existing drawings. Geometric nonlinearities are taken into consideration in the analysis using P-Delta large displacement criterion. The time dependent material strength of steel and concrete and geometric variations is included in the analysis. Time dependent material properties are considered as compressive strength, aging, shrinkage and creep for concrete, and relaxation for steel. To emphases the soil condition effect on the structural behavior of suspension bridges, each of hard, medium and soft soils are considered in the analysis. The structural behavior of the bridge at different construction stages and different soil conditions has been examined. Two different finite element analyses with and without construction stages are carried out and results are compared with each other. At the end of the analyses, variation of the displacement and internal forces such as bending moment, axial forces and shear forces for bridge deck and towers are given in detail. Also, displacement and stresses for bridge foundation are given with detail. It can be seen from the analyses that there are some differences between both analyses (with and without construction stages) and the results obtained from the construction stages are bigger. It can be stated that the analysis without construction stages cannot give the reliable solutions. In addition, soil condition have effect on the structural behavior of the bridge. So, it is thought that construction stage analysis using time dependent material properties, geometric nonlinearity and soil conditions effects should be considered in order to obtain more realistic structural behavior of suspension bridges.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.3
• /
• pp.578-590
• /
• 2017

An agricultural waste, pomegranate (Punica granatum L.) peel is known to be rich in total phenolics, which are flavonoids having strong antioxidant effects. In this study, pomegranate peel sponge cakes were prepared with varying ratios of freeze dried pomegranate peel powder (0, 1, 3, 5, 7% (w/w)) to examine their effect on quality characteristics, retrogradation and antioxidant activities. The specific gravity and moisture contents of 3, 5, and 7% pomegranate peel powder showed higher values than the control and 1% group. Addition of pomegranate peel powder increased the batter yield, while there was a significant decrease in baking loss. Increasing pomegranate peel powder content significantly decreased the lightness (L) (from 75.03 to 57.04) and pH values, whereas redness (a), yellowness (b) and ${\Delta}E$ were increased. Increasing concentration of the peel powder also increased the hardness and chewiness, while the springiness and cohesiveness decreased. Considering the Avrami equation, Avrami exponene (n) decreased from 1.8055 (control) to 0.9199 (7% pomegranate peel powder). Time constant (1/k) was lowest in control (at 17.64) and highest in the 7% group (39.84). Total polyphenol, flavonoid content, DPPH and ABTS radical scavenging activities significantly increased with increments in the content of pomegranate peel powder. A sensory evaluation by the 7-point scaling method showed that the sponge cake containing 7% pomegranate peel powder had the highest scores in color, flavor, sweetness, chewiness and overall acceptability. Hence, it is considered that sponge cake supplemented with 7% pomegranate peel powder is the most appropriate for quality characteristics, retrogradation and antioxidant activities.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1535-1548
• /
• 2004

Condensation heat transfer experiments were conducted with the oblong shell and plate heat exchanger without oil in a refrigerant loop using R-l34a, R-407C and R-410A. An experimental refrigerant loop has been developed to measure the condensation heat transfer coefficient h$_{r}$ and frictional pressure drop $\Delta$p$_{f}$ of the various refrigerants in a vertical oblong shell and plate heat exchanger. The effects of the refrigerant mass flux(40∼80kg/$m^2$s), average heat flux(4∼8kW/$m^2$), refrigerant saturation temperature(30∼4$0^{\circ}C$) and vapor quality of refrigerants on the measured data were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. A comparison of the performance of the various refrigerants revealed that R-410A had the highest heat transfer performance followed by R-l34a, and R-407C had the lowest performance of the refrigerants tested. The pressure drops were also reported in this paper. The pressure drops for R-410A were approximately 45% lower than those of R-l34a. R-407C had 30% lower pressure drops than R-l34a. Experimental results were compared with several correlations which predicted condensation heat transfer coefficients and frictional pressure drops. Comparison with the experimental data showed that the previously proposed correlations gave unsatisfactory results. Based on the present data, empirical correlations of the condensation heat transfer coefficient and the friction factor were proposed.tor were proposed.sed.

• Journal of Biosystems Engineering
• /
• v.42 no.1
• /
• pp.44-55
• /
• 2017

Background: Heat recovery is one of the prominent ways to save a considerable amount of conventional fossil fuel and minimize its adverse effects on the environment. The rotary heat exchanger is one of the most effective and efficient devices for heat recovery or heat exchanging purposes. It is a regenerative type of heat exchanger, which has been studied and used for many heat recovery purposes. However, regenerative thermal wheels have been mostly used as heat recovery systems in buildings. For modeling a rotary regenerator, it is very important to numerically consider all the factors involved, such as effectiveness, rotational speed, geometrical size and shape, and pressure drop (${\Delta}p$). In recent times, several researchers have actively studied the rotary heat exchangers, both theoretically and experimentally. Reviews: In this paper different advances in the numerical modeling of regenerative rotary heat exchangers in relation to fluid flow and heat transfer have been discussed. Researchers have indicated that the effectiveness of the regenerative rotary heat exchanger depends on various factors including, among many others, rotational speed, rotational period and combustion power. It is reported that with the increase of periodic rotation the deviation of theoretical results from the experimental result increases. The available literature indicates that regenerative heat exchangers are having relatively more effectiveness (60-80%), compared to other heat exchangers. It is also observed that the finite difference method and finite volume methods are mostly used for discretizing the heat transfer governing equations, under some assumptions. Research also indicates that for the effectiveness calculation the ${\varepsilon}-NTU$ method is the most popular and convenient.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.629-639
• /
• 2004

A steel frame is one of the most commonly used structural systems due to its resistance to various types of applied loads. Many studies have been conducted to investigate the effects of several parameters, such as connection flexibility, the boundary condition of each support, and beam-to-column stiffness ratio, on the characteristic behavior of a frame. Based on the results of these studies, several design methods have been proposed. This research focused on the number of bolts on the rotational stiffness of a double-angle connection, and its effect on the story drift of a frame. To achieve these purposes, a simplified analytical model was proposed. Several experimental tests were also conducted to obtain the rotational connection stiffness of each double-angle connection.

• Smart Structures and Systems
• /
• v.18 no.1
• /
• pp.75-92
• /
• 2016

The design of a semi-active (SA) control system addressed to mitigate wind induced structural demand to high wind turbine towers is discussed herein. Actually, the remarkable growth in height of wind turbines in the last decades, for a higher production of electricity, makes this issue pressing than ever. The main objective is limiting bending moment demand by relaxing the base restraint, without increasing the top displacement, so reducing the incidence of harmful "p-delta" effects. A variable restraint at the base, able to modify in real time its mechanical properties according to the instantaneous response of the tower, is proposed. It is made of a smooth hinge with additional elastic stiffness and variable damping respectively given by springs and SA magnetorheological (MR) dampers installed in parallel. The idea has been physically realized at the Denmark Technical University where a 1/20 scale model of a real, one hundred meters tall wind turbine has been assumed as case study for shaking table tests. A special control algorithm has been purposely designed to drive MR dampers. Starting from the results of preliminary laboratory tests, a finite element model of such structure has been calibrated so as to develop several numerical simulations addressed to calibrate the controller, i.e., to achieve as much as possible different, even conflicting, structural goals. The results are definitely encouraging, since the best configuration of the controller leaded to about 80% of reduction of base stress, as well as to about 30% of reduction of top displacement in respect to the fixed base case.