Browse > Article
http://dx.doi.org/10.3795/KSME-B.2004.28.12.1535

Study on R-l34a, R-407C, and R-410A Condensation Performance in the Oblong Shell and Plate Heat Exchanger  

Park, Jae-Hong (부경대학교 대학원 냉동공조공학과)
Kim, Young-Soo (부경대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.28, no.12, 2004 , pp. 1535-1548 More about this Journal
Abstract
Condensation heat transfer experiments were conducted with the oblong shell and plate heat exchanger without oil in a refrigerant loop using R-l34a, R-407C and R-410A. An experimental refrigerant loop has been developed to measure the condensation heat transfer coefficient h$_{r}$ and frictional pressure drop $\Delta$p$_{f}$ of the various refrigerants in a vertical oblong shell and plate heat exchanger. The effects of the refrigerant mass flux(40∼80kg/$m^2$s), average heat flux(4∼8kW/$m^2$), refrigerant saturation temperature(30∼4$0^{\circ}C$) and vapor quality of refrigerants on the measured data were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. A comparison of the performance of the various refrigerants revealed that R-410A had the highest heat transfer performance followed by R-l34a, and R-407C had the lowest performance of the refrigerants tested. The pressure drops were also reported in this paper. The pressure drops for R-410A were approximately 45% lower than those of R-l34a. R-407C had 30% lower pressure drops than R-l34a. Experimental results were compared with several correlations which predicted condensation heat transfer coefficients and frictional pressure drops. Comparison with the experimental data showed that the previously proposed correlations gave unsatisfactory results. Based on the present data, empirical correlations of the condensation heat transfer coefficient and the friction factor were proposed.tor were proposed.sed.
Keywords
Oblong Shell and Plate Heat Exchanger; Condensation; Performance; Heat Transfer Coefficient; Pressure Drop;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Friedel, L., 1979, 'New Friction Pressure Drop Correlations for Upward, Horizontal and Downward Two-Phase Pipe Flow,' Presented at the HTFS Symposium, Oxford. (Hoechst AG Reference 372217/24 698)
2 Traviss, D. P., Rohennow, W. M. and Baron, A. B., 1972, 'Forced-Convection Condensation Inside Tubes: A Heat Transfer Equation for Condenser Design,' No. 2272, RP-63, MIT Report DSR-72591, pp. 157-165
3 Colburn, A. P. and Carpenter, E. F., 1949, 'The Effect of Vapor Velocity on Condensation Inside Tubes,' General Discussion on Heat Transfer and Fluid Mechanics Institute, ASME, New York
4 Suh, J. M. and Kim, M. S., 1999, 'Condensation Heat Transfer of R407C and R410A in a Horizontal Smooth Tube,' Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 11, No. 5, pp. 633-641   과학기술학회마을
5 Shah, R. K. and Focke, W. W., 1988, 'Plate Heat Exchangers and Their Design Theory,' in: Shah, R. K., Subbarao, E. C. and Mashelkar, R. A.(Eds.), Heat Transfer Equipment Design, Hemisphere, Washington, DC, pp. 227-254
6 Lin, T. F. and Hsieh, Y. Y., 2002, 'Saturated Flow Boiling Heat Transfer and Pressure Drop of Refrigerant R-410A in a Vertical Plate Heat Exchanger,' Int. J. Heat and Mass Transfer, Vol. 45, pp. 1033-1044   DOI   ScienceOn
7 Zivi, S. M., 1964, 'Estimation of Steady State Void Fraction by Means of the Principle of Minimum Entropy Production,' Trans. Am. Soc. Mech. Eng., Ser. C. J. Heat Transfer 86, pp. 247-252   DOI
8 Jeon, C. D., Kwon, O. K. and Lee, J. H., 2001, 'Study on the Heat Transfer and Pressure Drop Characteristics of R-22 in Brazed Plate Heat Exchanger,' Trans. of the KSME (B), Vol. 25, No. 2, pp. 171-179
9 Byun, J. H. and Lee, K. J., 2000, 'An Experimental Study of Condensation in Plate Heat Exchangers with R-410a,' Proceedings of the KSME 2000 Spring Annual Meeting B, pp. 304-310
10 Yan, Y. Y. and Lin, T. F., 1999, 'Evaporation Heat Transfer and Pressure Drop of Refrigerant R-134a in a Plate Heat Exchanger,' Transactions of the ASME, Vol. 121, pp. 118-127   DOI   ScienceOn
11 Bogaert, R. and BOies, A., 1995, 'Global Performance of a Prototype Brazed Plate Heat Exchanger in a Large Reynolds Number Range,' Swiss Federal Institute of Technology, EPFL-LTT, Lausanne, Switzerland, Experimental Heat Transfer, Vol. 8, pp. 293-311   DOI
12 Stasiek, J., Collins, M. W., Clofalo, M. and Chew, P. E., 1996, 'Investigation of Flow and Heat Transfer in Corrugated Passages-1 Experimental Results,' Int. J. Heat and Mass Transfer, Vol. 39, No. 1, pp. 149-164   DOI   ScienceOn
13 Shah, M. M., 1979, 'A General Correlation for Heat Transfer During Film Condensation Inside Pipes,' Int. J. Heat and Mass Transfer, Vol. 22, pp. 547-556   DOI   ScienceOn
14 Akers, W. W., Dean, H. A. and Crosser, O. K., 1959, 'Condensation Heat Transfer Within Horizontal Tubes,' Chemical Engineering Progress Symposium Series, Vol. 55, pp. 171-176
15 Wijaya, H. and Spatz, M. W., 1995, 'Two-phase Flow Transfer and Pressure Drop Characteristics of R-22 and R-32/R-125,' ASHRAE Trans. 101(1) : pp. 1020-1027
16 Yang, C. and Webb, R.L., 1996, 'Condensation of R12 in Small Hydraulic Diameter Extruded Aluminum Tubes with and Without Micro-Fins,' International Journal of Heat and Mass Transfer, Vol. 39, pp. 791-800   DOI   ScienceOn
17 Shah, R. K. and Wanniarachchi, A. S., 1992, 'Plate Heat Exchanger Design Theory,' Industrial Heat Exchangers, J. M. Buchlin, ed., Von Karman Institute for Fluid Dynamics, Belgium
18 Yan, Y. Y., Lio, H. C. and Lin, T. F., 1999, 'Condensation Heat Transfer and Pressure Drop of Refrigerant R-134a in a Plate Heat Exchanger,' Int. J. Heat and Mass Transfer 42, pp. 993-1006   DOI   ScienceOn