References
- Airaksinen M. and P. Matilainen. 2011. A Carbon Footprint of an Office Building. Energies. 4:1197-1210. https://doi.org/10.3390/en4081197
- Antonellis, S. D., C. M. Joppolo and L. Molinaroil. 2010. Simulation, performance analysis and optimization of dessicant wheel. Energy Build. 42:1386-93. https://doi.org/10.1016/j.enbuild.2010.03.007
- Armin H. K, H. Ebrahim. 2014. Three-dimensional simulation of rotary air preheater in steam power plant. Applied Thermal Engineering. 73:399-407. https://doi.org/10.1016/j.applthermaleng.2014.08.013
- B. Suden and L. Wang. 2008. Relevance of Heat Transfer and Heat Exchangers for Development of Sustainable Energy Systems. WIT Transactions on State of the Art in Science and Engineering. 42:1755-8336.
- Baclic, B. S. 1995. The application of the Galerkin method to the solution of the symmetric and balanced regenerato. International Journal of Heat and Mass Transfer. 107:214-220.
- Borah, A. K., P. K. Singh and P. Goswami. 2013. Advances in Numerical Modeling of Heat Exchanger Related Fluid Flow and Heat Transfer. American Journal of Engineering Science and Technology Research. 1(9):156-166.
- Bowlen, K. L. 1993. Energy Recovery from Exhaust Air for Year Round Environmental Control. Symposium, ASHRAE Transactions, Volume 80, Part 1, Los Angeles, CA.
- Chi, Z. H. 2002. Experimental studies on measuring the cold end metal temperature of 600 MW rotating air heater. China Journal of the Proceedings of the CSEE. 22:128-132.
- Downing, C. C. and C. W. Bayer. 1993. Classroom indoor air quality vs ventilation rate. ASHRAE Transactions. 99(2):1099-1103.
- Gale, W. K. V. 1967. British iron and steel industry. David and Charles, Newton Abbot. 98-100.
- Ghodsipour, N., M. Sadrameli. 2003. Experimental and sensitivity analysis of a rotary air preheater for the flue gas heat recovery. Applied Thermal Engineering. 23(5):571-580. https://doi.org/10.1016/S1359-4311(02)00226-0
- Gholap, A. K. and J. A. Khan. 2007. Design and multi objective optimization of heat exchangers for refrigerators. Applied Energy 84:1226-1239. https://doi.org/10.1016/j.apenergy.2007.02.014
- Hilbert, R. 2006. Multi-Objective shape optimization of a heat exchanger using parallel genetic algorithms. International Journal of Heat and Mass Transfer 49:2567-2577. https://doi.org/10.1016/j.ijheatmasstransfer.2005.12.015
- Kangolu, M., C. M. Oozdinc and M. Yidirim. 2004. Energy and exergy analysis of an experimental open-cycle desiccant cooling system. Applied Thermal Engineering. 24(5):919-31. https://doi.org/10.1016/j.applthermaleng.2003.10.003
- Kays, W. M. and A. L. London. 1984. Compact Heat Exchangers. 3rd edition. McGraw-Hill Book Co. New York.
- Klein, H., S. A. Klein and J. W. Mitchell. 1990. Analysis of regenerative enthalpy exchangers. International Journal of Heat and Mass Transfer. 33(4):735-744. https://doi.org/10.1016/0017-9310(90)90171-P
- Lamberston, T. J. 1958. Performation factors of a periodic-flow heat exchanger, Transactions on ASME. 80:586-592.
- Leng, W. 2005. Heat exchange calculation of a regenerative air heater with analytical method. China Journal of the Proceedings of the CSEE. 25:142-148.
- LeVeque, Randall. 2002. Finite Volume Methods for Hyperbolic Problems, Cambridge University Press.
- Mardiana A. and S. B. Riffat. 2013. Review on physical and performance parameters of heat recovery systems of building applications. Renewable and Sustainable Energy Review. 28:174-190. https://doi.org/10.1016/j.rser.2013.07.016
- Masson, C., H. J. Saabas and K. B. Baliga. 1994. Co located equal-order control volume Finite Element Method for two-dimensional axisymmetric incompressible flow. International Journal Numerical Methods Fluids. 18:1-26.
- Mathiprakasam, B. and Z. Lavan. 1980. Performance predictions for adiabatic desiccant dehumidifiers using linear solutions. Journal of Solar Energy Engineering. 102:73-9. https://doi.org/10.1115/1.3266125
- Nair, S, S. Verma and S. C. Dhingra. 1998. Rotary heat exchanger performance with axial heat dispersion. International Journal of Heat and Mass Transfer. 41(18):2857-2864. https://doi.org/10.1016/S0017-9310(98)00004-0
- Pascal, S., M. Dominique. 2008. Heat-and-mass transfers modelled for rotary desiccant dehumidifiers. Applied Energy. 85:128-142. https://doi.org/10.1016/j.apenergy.2007.06.017
- Patankar, S. V. 1980. Numerical Heat Transfer and Flui flow. Mc-Graw Hill Book Company, USA.
- Power H. and L. Wrobel. 1995. Boundary Integral Methods in Fluid Mechanics. Computational Mechanics Publications. Southampton. UK.
- Rengarajan, K., D. B. Shirey III and R.A. Raustad. 1996. Cost-effective HVAC Technologies to meet ASHRAE Standard 62-1989 in hot and humid climates. ASHRAE Transactions. 102:166-182.
- Romie, F. E. 1988. Transient Response of Rotary Regenerators. Transactions of ASME. Journal of Heat Transfer. 110:836-840. https://doi.org/10.1115/1.3250582
- Sanaye, S. 2008. Optimum operation conditions of a rotary regenerator using genetic algorithm, Energy and Buildings. 40(9):1637-1642. https://doi.org/10.1016/j.enbuild.2008.02.025
- Sanaye, S. and H. Hajabdollahi. 2009. Multi-objective optimization of rotary regenerator using genetic algorithm. International Journal of Thermal Sciences. 48:1967-1977. https://doi.org/10.1016/j.ijthermalsci.2009.02.008
- Sandira, A., S. Nikola, K. Ahmed, B. Indira. 2005. Numerical analysis of heat transfer and fluid flow in rotary regenerative air pre-heaters. Journal of Mechanical Engineering. 5:411-417.
- Shah, R. K., E. K. Subbarao and R. A. Mashelkar. 1988. Heat Transfer Equipment Design. Hemisphere, New York.
- Shiery, D. B. III, K. Rengarajan. 1996. Impact of ASHRAE Standard 62-1898 on small Florida offices. ASHRAE Transactions. 102:153-165.
- Simonson, C. J. and R. W. Besant. 1997. Heat and moisture transfer in desiccant coated rotary energy exchangers Part 1- numerical model. International Journal of HVAC & R research. 3:325-350. https://doi.org/10.1080/10789669.1997.10391381
- Simonson, C. J. and R. W. Besant. 1997. Heat and Moisture Transfer in Desiccant Coated Rotary Energy Exchangers: Part I. Numerical Model. HVAC & R Research. Volume 3: Issue 4.
- Simonson, C. J. and R. W. Besant. 1998. Heat and moisture transfer in energy wheels during sorption, condensation and frosting conditions. ASME Journal of Heat Transfer. 120:699-708. https://doi.org/10.1115/1.2824339
- Simonson, C. J. and R.W. Besan. 1999. Energy wheel effectiveness: Part I- Development of dimensionless group. International Journal of Heat and Mass Transfer. 42:2161-2170. https://doi.org/10.1016/S0017-9310(98)00325-1
- Simonson, C. J., D. L. Ciepliski and R. W. Besant. 1999. Determining the performance of energy wheels Part II experimental data and numerical validation. ASHRAE Transactions. volume 105:188-206.
- Skiepko, T. 1989. Effect of Parameter Values on Gas and Matrix Temperature Fields in Rotary Heat Exchangers. International Journal of Heat Mass Transfer. 32:1443-1472. https://doi.org/10.1016/0017-9310(89)90068-9
- Smith, G. D. 1978. Numerical Solution of Partial Differential Equations. Oxford University Press, UK.
- Stabat, P. and D. Marchio. 2009. Heat and mass transfer modeling in rotary desiccant dehumidifiers. Applied Energy. 86:762-771. https://doi.org/10.1016/j.apenergy.2007.06.018
- Stefano D. A., I. Manuel, M. J. Cesare and L. Calogero. 2014. Design Optimization of Heat Wheels for Energy Recovery in HVAC Systems. Energies. 7:7348-7367. https://doi.org/10.3390/en7117348
- Stiesch, G., S. A. Klein and J. W. Mitchel. 1995. Performance of Rotary Heat and Mass Exchangers. International Journal of HVAC & R Research. 1(4):308-323. https://doi.org/10.1080/10789669.1995.10391327
- Suden B. and L. Wang. 2003. Relevance of Heat Transfer and Heat Exchangers for Green House Emmissions. Advances in Heat Transfer Engineering. 101-112.
- Toro, E. F. 1999. Riemann Solvers and Numerical Methods for Fluid Dynamics. Springer-Verlag.
- Valancius R., A. Jurelionis and V. Dorosevas. 2013. Method for cost-benefit analysis of improved indoor climate conditions and reduced energy consumption in office buildings. Energies. 6:4591-4606. https://doi.org/10.3390/en6094591
- Versteeg, H. K. and W. Malalasekara. 1995. An Introduction to Computational Fluid Dynamics, The Finite Volume Method. Longman Science & Technology. UK.
- WorsAe-Schmidt, P. 1991. Effect of Fresh Air Purging on the Efficiency of Energy Recovery from Exhaust Air in Rotary Regenerators. International Journal of Refrigeration. 14(4):233-239. https://doi.org/10.1016/0140-7007(91)90008-5
- Wu, X., H. Ye, J. Wang, J. He, J. Yang 2012. Effectiveness analysis and optimum design of the Rotary Regenerator for Thermo Photovoltaic System. Frontiers in Energy. 6(2):193-199. https://doi.org/10.1007/s11708-012-0184-z
- Yilmaz, T. and O. B. Ukalaca. 2003 . Design of Regenerative Heat Exchangers. Heat Transfer Engineering. 24 (4):32-38. https://doi.org/10.1080/01457630304034
- Zafeiriou, E. and D. Wurz. 1996. Numerical Simulation of Heat Transfer Processes in Rotating Regenerators. VGB Kraftwerkstechnik. 76 (6).
- Zheng , M., L. X. Du, D. Liao , W. X. Chu , Q.W. Wang, Y. Luo, Y. Sun. 2012. Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods. Applied Energy. 92:725-732. https://doi.org/10.1016/j.apenergy.2011.08.008