• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.2
• /
• pp.108-116
• /
• 2023

Recently, the concentration of fine dust causative substances (NOx, VOC, etc.) in the atmosphere has increased, resulting in high concentrations of tropospheric ozone (O3) and increased damage to crops. This study aimed to analyze the impact of high concentrations of ozone gas on the initial growth of rice plants and investigate the relationship between ozone damage resistance and anthocyanin biosynthesis. To achieve this, rice plants were exposed to elevated levels of ozone g as using an ozone chamber, and subsequent measurements were taken to assess changes in growth, the percentage of damaged leaves, and the anthocyanin content. The results revealed that varieties with a higher proportion of damaged leaves exhibited a relative increase in anthocyanin biosynthesis following ozone exposure. Notably, detrimental effects on growth, such as decreased biomass, were mitigated. Additionally, Anthocyanin biosynthesis genes in rice were listed by selecting homologous genes from Arabidopsis and Maize. The expression of OsF3H2, OsFLS1 and OsLDOX3 was induced during ozone treatment. This result is expected to contribute to the study of the protection mechanism of plants from ozone damage.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.2
• /
• pp.129-133
• /
• 1982

This study was conducted to find out the resistance of rice varieties to ozone gas. Thirty eight rice varieties were exposed to 0.3 ppm $O_3$ gas for 3 hours. Damage symptom, percentage of destroyed leaf and chlorophyll contents were observed after $O_3$ fumigation. The results obtained are as follows. 1) Typical symptom of $O_3$ damage appeared to greyish subtle spots in Japonica type and redish brown subtle spots in Indica-Japonica hybrid type within rice leaf vein. 2) Resistant varieties to $O_3$ gas were Palgwangbyeo, Seokwangbyeo and Milyang 30, while sensitive ones were Gwanakbyeo, Jinjubyeo and Hankangchalbyeo. 3) Chlorophyll damage of rice leaves were higher in Nongbaeck, Dobongbyeo, Palgeum, Jinjubyeo than in Milyang 21, Podgwangbyeo, Josaeongtongil, Honamjosaeng, Hwanggeumbyeo. 4) The amount of chlorophyll damage showed highly significant positive correlation with that of leaf destruction.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.93.1-93
• /
• 2003

A growth chamber fumigation was conducted to evaluate the ozone (O3) on the physiology of three hot pepper, Capsicum annuum L. cultivars, 'dabotab', 'buchon' and 'pochungchun'. Thirty-day old plants were exposed to O3 of 120 nl 1-1 in the chambers for 8 h d-1 for 3 days. Foliar damage due to O3 was different from the varieties, 'dabotab'was most sensitive to O3, 'pochungchun' was medium, and 'buchon' was resistant. Ozone symptom on the leaves was bifacial necorsis. Photosynthesis and stomatal conductance were decreased due to O3 treatment, but they were not much different from the variety. Decreases of net photosynthesis by O3 were 56％, 40％ and 35％ on 'dabotab', 'buchon' and 'pochungchun', respectively Decreases of stomatal conductance by O3 were 66％, 63％, and 50％ on each varieties. Ozone closed the stomata and decrease net photosynthesis on hot peppers regardless of the variety. Light curves on the three varieties were showing similar patterns that O3 damage on net photosynthesis were started at the low levels of light with or without the visible injury, Assimilation-internal CO2 concentration curves of the three cultivars were not different due to the treatment. It means there was not significant biochemical damage Inside the leaves by O3. In conclusion, ozone closed the stomata and damaged light capturing system of the pepper leaves with or without the visible damage. Although visible damage of the leaves could be a good indicator of O3 resistance, the ecophysiological change by O3 were not proportional to the amout of visible injuries

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.226-232
• /
• 2003

To examine the effects of ozone (O$_3$), one of the major air pollutants in the city area, on genetic changes in Cornus controversa Hemsl., we compared genetic structures between sensitive (S) and tolerant (T) tree groups of C. controversa fumigated with ozone using isozyme markers. The genetic structures were measured in terms of allele and genotype frequencies determined at ave polymorphic enzyme loci. Marked genetic differences between the two groups were detected at three loci (Lap-2, Mdh-1 and Skdh-1). Genetic parameters, genetic multiplicity, genetic diversity and heterozygosity showed that the tolerant group retained greater genetic variation than did the sensitive group. Results of the study were congruent with the general expectation that the more heterozygous individuals and/or populations exhibit higher resistance to various stress factors.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.215-222
• /
• 1994

As a toughness modifier for plastics chlorosulfonated polyethylene(CSM) can be used. CSM has a good resistance to oxygen and ozone. CSM has a crosslinkable functional group(sulfonyl chorid) with sulfur and metal oxide. Polyvinylchloride(PVC) is widely used industrial plastics because of its balanced properties and low cost. But it has some disadvantages such as low impact strength, light, ozone and oxygen degradation. In order to improve these properties of PVC, CSM was blended with PVC. The toughening effect appeared at about 10wt% and there is no additional effect above 30wt% of CSM. The weatherability, ozone resistance and mechanical properties of PVC were improved by blending with CSM. The toughening mechanism is studied by SEM.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.193-200
• /
• 1998

It is well known that EPDM(ethylene propylene diene monomer) rubber has inherently excellent resistance to the weathering, ozone, heat, cold and moisture, whereas crosslinked IIR (isobutylene isoprene divlnyl benzene terpolymer) shows proper resistance to the water and gas permeation. Various characteristics of EPDM blend with crosslinked IIR such as curing characteristics, mechanical properties, dispersion of minor component and gas impermeability were explored. The optimum curing time $(t_{90})$ examined with peroxide was decreased by adding small amount of crosslinked IIR to the EPDM rubber. Mechanical properties of blends such as tensile strength, hardness and elongation at break were enhanced by increasing EPDM content. These results might be explained with the affinity of carbon black to the EPDM rubber. On the other hand, the physical properties were not changed significantly after aging, and the increase of crosslinked IIR fraction caused the decrease of compression set to small rate. EPDM rubber shows different behavior with crosslinked IIR in oxygen permeability. By adding 30wt.% crosslinked IIR to the EPDM rubber, the resistance to the oxygen permeation was improved up to three times than that of pure EPDM rubber. Conclusively, EPDM blend containing 30wt.% crosslinked IIR might be commercially applied to the o-ring and electric parts because of its proper resistance to the weathering, ozone and oxygen permeability.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.363-369
• /
• 2013

In this work, the effects of ozone treatments on mechanical interfacial properties of carbon fibers-reinforced nylon-6 matrix composites were investigated. The surface properties of ozone treated carbon fibers were studied by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). Mechanical interfacial properties of the composites were investigated using critical stress intensity factor ($K_{IC}$). The cross-section morphologies of ozone-treated carbon fiber/nylon-6 composites were observed by scanning electron microscope (SEM). As a result, $K_{IC}$ of the ozone-treated carbon fibers-reinforced composites showed higher values than those of as-received carbon fibers-reinforced composites due the enhanced $O_{1s}/C_{1s}$ ratio of the carbon fiber by the ozone treatments. This result concludes that the mechanical interfacial properties of nylon-6 matrix composites can be controlled by suitable ozone treatments on the carbon fibers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.59-62
• /
• 2002

Recently, advanced system for water and wastewater treatment is introduced and operated because of water pollution and etc. One of this System makes use of O3(Ozone) for water and wastewater treatment. In airtight concrete structure, waterproofing phase as well as water are affected by strong oxidative O3 in the long-term. For this reason, material stability against O3 is examined. Consequently, the purpose of this study is to find out material stability an object of epoxy resin by way of accelerated O3 testing.

• Journal of Korean Society of Forest Science
• /
• v.94 no.3 s.160
• /
• pp.191-196
• /
• 2005

This studies were conducted to compare ozone sensitivity among half-sib families of Japanese red pine (Pinus densiflora S. et Z.). 90 families were exposed in walk-in type chambers to charcoal-filtered air and 100 ppb ozone for 8 hours daily, 5 consecutive months. We surveyed the foliar injury, Relative DRC (diameter at root collar) growth and relative dry weight after fumigation. After 5 months of exposure, foliar injury ranged from 1.9% at tolerant group to 15.2% at sensitive group. Relative DRC growth rates showed increased 12% at tolerant group, but reduced 23% at sensitive group. Total dry weight increased 17% at tolerant group, otherwise reduced by 33% at sensitive group, relative to the control. The root biomass showed more sensitive than the other part biomass. On the basis of the results of these screening studies, families Kangwon 04, 16, 26, 27 and 73 were determined to be tolerant; Kangwon 40, 52, 83, Gyeonggi 01 and Gyeongbuk 20 to be sensitive to ozone. Considerable genetic variation in ozone responses occurred, as shown by differences in sensitivities among families and among groups. These results indicate that tolerant groups of P. densiflora exhibited a high degree of resistance to ozone pollution injury.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.2
• /
• pp.161-168
• /
• 2017

Microfiltration (MF) and Ultrafiltration (UF) membrane processes capable of producing highly purified water have been extensively applied as a pretreatment process in the wastewater reuse field with the improvement of membrane properties and resistance, development of operating protocols, and improvement of technologies of backwashing and physicochemical cleaning, and improvement of scale and antifoulants. However, despite of the development of membrane production and process technologies, fouling still remains unresolved. This study confirmed that foulants such as polysaccharides, proteins and humic substances existed in final treated effluent (secondary effluent) by fluorescence excitation emission matrix (FEEM) and fourier transform infrared spectroscopy (FTIR) analysis. In addition, when constructing ozone oxidation and coagulation processes as a hybrid process, the removal efficiency was 5.8%, 6.9%, 5.9%, and 28.2% higher than that of the single process using coagulation in turbidity, color, dissolved organic carbon (DOC), and UV254, respectively. The reversible and irreversible resistances in applying the hybrid process consisting of ozone oxidation and coagulation processes were lower than those in applying ozone oxidation and coagulation processes separately in UF membrane process. Therefore, it is considered possible to apply ozonation/coagulation as a pretreatment process for stable wastewater reuse by and then contributing to the reduction of fouling when calculating the optimal conditions for ozone oxidation and coagulation and then to applying them to membrane processes.