• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.383-389
• /
• 2015

Chitooligosaccharide (COS), as antioxidant, extensively applied to food and juice preservation. In the present study, influences of COS on vase life and ornamental value of cut roses were investigated. Results showed that vase life of cut roses treated by COS was longer 6.4 days than one of control and ornamental character of cut roses was improved effectively by COS. The increase of vase life and ornamental value were chiefly governed by that COS improved water absorption capacity of cut roses. Besides that, COS decreased the contents of superoxide anion and hydrogen peroxide and lowered the levels of malondialdehyde in turn during the senescence process of cut roses. That was because that COS not only enhanced activities of antioxidant enzymes glutathione reductase, but also improved reduced glutathione contents in petals of cut rose. Therefore, COS could be used in commercial preservatives to improve the longevity of cut roses.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.112.1-112.1
• /
• 2010

To develop domestic IGCC gasification technology, a gasification test bed with a capacity of 20 tons/day has been designed. The main components of the test bed designed are a coal pulverizing and feeding facility, a gasifier, a syngas cooler, a gas treatment unit, oxygen and nitrogen tanks, and flare stack. For wide applications to the development of advanced coal gasification technology, many special functions have been given to it such as syngas recirculation, char recirculation, and multiple stage gasification. The test bed will be used for testing the characteristics of various types of coals, deriving optimum conditions for efficient gasifier operation and trouble shooting for the Korea IGCC demonstration plant. It will also be applied as a useful tool to develop scale-up design technology of IGCC and proceed to commercialization.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3461-3464
• /
• 2012

• Journal of Hydrogen and New Energy
• /
• v.7 no.1
• /
• pp.39-44
• /
• 1996

The discharge capacity of V-Ti-Ni(V-rich) metal hydride electrode during the charge-discharge cycling was investigated in KOH electrolyte. All electrodes were degraded within 25 cycles. To investigate the cause of the degradation phenomena impedance measurements were performed by using E.I.S(electrochemical impedance spectroscopy). The surfaces of the degraded electrodes were examined by Auger electron spectroscopy (AES). It was observed that all electrodes were covered with oxygen from the surface to the bulk, titanium was enriched near surface, and vanadium was dissolved from the surface to the bulk.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1150-1154
• /
• 2003

The voltage profile during discharge of the zinc air battery has very flat pattern until reach to end of discharge voltage. But, when zinc air battery is discharged by high current, the discharge voltage and energy becomes low. Therefore, we focused on effects of catalyst size to solve this problems by increasing active sites of oxygen reduction reaction. The size of catalyst was reduced from 27 to l${\mu}{\textrm}{m}$ and we examined average discharge voltage, capacity, energy, resistance and characteristics during GSM pulse discharge of zinc air battery with change of current density. And we also measured porosity of the cathode according to the ASTM. So we have got improvement of average discharge voltage and energy when catalyst was minimized and we have got optimum size of catalyst at 5${\mu}{\textrm}{m}$.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.552-558
• /
• 2000

LiMn2O4 thin fiolm cathodes for Li-ion secondary battery were fabricated by r.f. magnetron sputtering technique. As-deposited films were amorphous. A spinel structure could not be obtained LiMn2O4 films by in-situ thermal annealing. After post thermal annealing over $700^{\circ}C$ in oxygen atmosphere, LiMn2O4 films prepared above 100 W r.f. power could be crystallized into a spinel structure. The electrochemical property of the LiMn2O4 film cathodes was tested in a Li/1 M LiClO4 in PC/LiMn2O4 cell. From cyclic voltammetry at scan rate of 2mV/sec of 2.5~4.5V, LiMn2O4 electrode prepared by post annealing at 75$0^{\circ}C$ showed good initial capacity. LiMn2O4 electrode prepared by post annealing at 80$0^{\circ}C$ showed the best crycling performance.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.2
• /
• pp.49-52
• /
• 2014

Graphene nanosheets (GNS), nitrogen-doped graphene nanosheets (N-GNS), and sulfur-doped graphene nanosheets (S-GNS) were successfully synthesized, and their catalytic effects on the oxygen reduction reaction (ORR) in $Li-O_2$ batteries were compared. The S-GNS electrode exhibited the highest ORR catalytic activity, resulting in enhanced discharge capacity and power capability. We attributed the enhanced ORR catalytic activity to the increased defect sites on graphene.

• Journal of Environmental Health Sciences
• /
• v.13 no.2
• /
• pp.83-90
• /
• 1987

The objective of this study is to review the basic theories related substrate removal in wastewater flow variations using submerged biofilm reactor. An aerated biofilm reactor is that in which influent organic substrates are aerobically oxidized by the microorganisms of biofilm grown on the surface of submerged media. No sludge is returned, and oxygen is supplied by diffusers. Three types of aerated biofilm reactor are one stage-central aeration, one stageup flow aeration and two stage-side aeration. The orders of substrate removal capacity in wastewater flow variations showed two stage-side aeration, one stage-upflow aeration and one stage-central aeration. The phenonmenon of nonclosing volid in upflow aeration type was superior to these in central-side aeration type. Attached biofilm masses in case of upflow, side and central aeration reactor were 1.0mg/cm$^2$, 4.1 mg/cm$^2$ and 0.93 mg/cm$^2$, respectively. Yield coefficient for biofilm was 0.31 to 0.48. Especially, removal efficiency can be increased remarkably according to the number of biofilm reactor and the packed condition of media.

• New & Renewable Energy
• /
• v.9 no.1
• /
• pp.51-59
• /
• 2013

Tantalum carbide crystallites which is to be used for $H_2$ fuel cell has been synthesized via a temperature-programmed reduction of $Ta_2O_5$ with pure $CH_4$. The resultant Ta carbide crystallites prepared using two different heating rates and space velocity exhibit the different surface areas. The $O_2$ uptake has a linear relation with surface area, corresponding to an oxygen capacity of $1.36{\times}10^{13}\;O\;cm^{-2}$. Tantalum carbide crystallites are very active for hydrogen production form ammonia decomposition reaction. Tantalum carbides are as much as two orders of magnitude more active than Pt/C catalyst (Engelhard). The highest activity has been observed at a ratio of $C_1/Ta^{{\delta}+}=0.85$, suggesting the presence of electron transfer between metals and carbon in metal carbides.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2003.05a
• /
• pp.91-92
• /
• 2003

Oxidative stress induced by reactive oxygen intermediates (ROIs) has been implicated in a variety of human diseases including cancer, diabetes, rheumatoid arthritis and neurodegenerative disorders. Hydrogen peroxide ($H_2O$$_2$), a representative ROI which is produced during the cellular redox process, can cause cell death via apoptosis and/or necrosis depending on its concentrations. (omitted)