• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.330-336
• /
• 2005

The ozone injection method was proposed to improve the catalytic process for the removal of nitrogen oxides ($NO_x$). Nitric oxide (NO) in the exhaust gas was first oxidized to nitrogen dioxide ($NO_2$) by ozone produced by dielectric barrier discharge, and then the exhaust gas containing the mixture of NO and $NO_2$ was directed to the catalytic reactor where both NO and $NO_2$ were reduced to $N_2$ in the presence of ammonia as the reducing agent. A commercially available $V_2O_5-WO_3/TiO_2$ catalyst was used as the catalytic reactor. The $NO_2$ content in the mixture of NO and $NO_2$ was changed by the amount of ozone added the exhaust gas. The effect of reaction temperature, initial $NO_x$ concentration, feed gas flow rate, and ammonia concentration on the removal of $NO_x$ at various $NO_2$ contents was examined and discussed. The increase in the content of $NO_2$ by the ozone injection remarkably improved the performance of the catalytic reactor, especially at low temperatures. The present ozone injection method appears to be promising for the improvement of the catalytic reduction of $NO_x$.

• Journal of Korean Society on Water Environment
• /
• v.21 no.5
• /
• pp.484-489
• /
• 2005

In order to determine the removal rate of non-biodegradable substances and the change of their structural properties, this study was carried out by an ozone-treatment experiment on leachate collected from the landfill area of D City in Chung chung nam-do and examined the change of the chemical properties of non-biodegradable substances. The main elements of non-biodegradable substances in landfill leachate were benzene, toluene, trichloroethane, trichloroethylene, xylene, etc. and the concentration of toluene was 15.7 mg/L on the average, benzene 7.2 mg/L, trichloroethane 1.1 mg/L, trichloroethylene 0.75 mg/L and xylene 0.5 mg/L. When leachate was treated with ozone for 10 min, 30 min and 60 min, UV absorbance was reduced with the increase of reaction time, and the reduction rate was 38.6% at 60 min. TOC was removed by 13.2% at 60 min. The low reduction rate of TOC may be because TOC reacts indirectly with OH radical produced from reaction with ozone while UV absorbance usually relies on direct reaction between organic matters and ozone molecules. Color was removed by up to 97%, which suggests that ozonation is highly effective in removing coloring elements in leachate. Sixteen kinds of non-biodegradable compounds were found in the leachate and most of them had the characteristic of aromatic hydrocarbon. Among them dibutyl phthalate was identical with a substance included in the list of US EPA, which is classified as a mutagen that may cause the mutation of genes and disorders in chromosomes. In addition, 2,5-Cyclohexadiene-1,4-dione, 1,2-Benzenedicarboxylic acid and butyl octyl ester were found to be similar to substances listed by USEPA. According to the result of analyzing structural changes before and after ozonation using GC-MS, cyclic compounds and aromatic compounds were observed in the original water and aliphatic compounds were newly observed after ozonation. In addition, through ozonation, humic substances of high molecular weight were oxidized and decomposed and produced low-molecular compounds such as aldehyde, ketone and carboxyl acid and highly biodegradable aliphatic carbon, which suggests the bio-degradability of non-biodegradable substances.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.263-268
• /
• 2019

Methanol is a toxic alcohol used in various products such as antifreeze, detergent, disinfectant and industrial solvent. In the human body, methanol is oxidized to formaldehyde and formic acid, which can lead to metabolic acidosis, optic nerve impairment, and death. In this study, the methanol levels in detergents (n=191) and rinse aids (n=13) were analyzed by gas chromatography-headspace-mass spectrometry (GC-HS-MS). Limit of detection was 1.09 mg/kg, accuracy and precision were 91.1-97.9% and <10%, and it was suitable for quantitative analysis. This analysis method was simple and fast with a higher recovery rate than the conventional MFDS (Ministry of Food and Drug Safety) method of diluting the sample in water and putting it in a headspace vial.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.404-409
• /
• 2008

Excessive presence of heavy metals in environment affects plants and fruits grown in the contaminated area. Rapid on-site monitoring of heavy metals can provide useful information for efficiently characterizing heavy metal-contaminated sites and for minimizing the exposure of the contaminated food crops to humans. This study reports on the evaluation of gold and glassy carbon (GC) electrodes with mercury or bismuth as a coating material for simultaneous determination of cadmium (Cd) and lead (Pb) in 0.1 M $HNO_3$ solution by anodic stripping voltammetry (ASV). The use of a square-wave voltammetric potential between a working electrode and a reference electrode caused Cd and Pb ions deposited on the electrode surface to be oxidized, thereby generating electric currents at different potentials. The mercury-coated gold electrode was not sensitive enough to detect the usable range of Cd concentrations (1 to 100 ppb). The GC electrodes with mercury or bismuth displayed well-defined, sharp and separate current peaks for Cd and Pb ions when the square-wave voltammetric potentials were applied. The peak currents measured with both mercury- and bismuth- coated GC electrodes were linearly proportional to Cd and Pb concentrations in the range of 1 to 200 ppb in 0.1 M $HNO_3$ with strong linear relationships between concentration and peak current ($R^2$ > 0.95), indicating that both of Cd and Pb ions could be quantitatively measured.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.699-708
• /
• 2015

This study was performed to identify the state of the exposure and characteristics of pollutants by each process at 4 casting sites located in Gyeongsang-do from April to November 2013. The concentrations of methanol, crystallized silica glass, formaldehyde and phenol were analyzed by different process - casting process, molding process, core process, and shakeout & finishing process. The highest concentration of methanol was found in casting and molding process, whereas the highest concentration of crystalline quartz(Silica) was observed in core process. The most oxidized steel dusts and the highest concentration of fume were found in shakeout & finishing process. As a result of this study, those labors working at the casting site were found to be constantly exposed to various forms of hazardous chemicals; therefore, it is considered that this is the time to manage and plan how to reduce them. In addition, it is required to thoroughly manage the local exhauster, and improve the process and working environment to reduce various forms of hazardous chemicals.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.375-387
• /
• 2007

The Iksan Mireuksaji stone pagoda, designated as national treasure No. 11 in Korea, has been in the process of disassembling for reconstruction as part of the cultural heritage conservation program. The pagoda is mainly consisting of granite, which is relatively resistant to weathering. However, it has lost its original rock color due to various contaminants deposited at the surface since it exposed to the atmospheric environment long time. In this research, we categorized the secondary inorganic contaminants into the genetic type, and also quantitatively examined occurrences and types of pollutants in the oxidation area of the pagoda surface in which the area is clearly distinguished by naked eyes. Geochemical behavior of soluble pollutants through reaction experiments are demonstrated, and effective methods of cleaning for the conservation and scientific applicability of the surface cleaner are also studied.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.217-222
• /
• 2010

Zirconium diboride (ZrB2) and mixed diboride of (Zr0.7Ta0.3)B2 containing 30 vol.% silicon carbide (SiC) composites were prepared by hot-pressing at $1800^{\circ}C$. XRD analysis identified the high crystalline metal diboride-SiC composites at $1800^{\circ}C$. The TaB2 addition to ZrB2-SiC showed a slight peak shift to a higher angle of 2-theta of ZrB2, which confirmed the presence of a homogeneous solid solution. Elastic modulus, hardness and fracture toughness were slightly increased by addition of TaB2. A volatility diagram was calculated to understand the oxidation behavior. Oxidation behavior was investigated at $1500^{\circ}C$ under ambient and low oxygen partial pressure (pO2~10-8 Pa). In an ambient environment, the TaB2 addition to the ZrB2-SiC improved the oxidation resistance over entire range of evaluated temperatures by formation of a less porous oxide layer beneath the surface SiO2. Exposure of metal boride-SiC at low pO2 resulted in active oxidation of SiC due to the high vapor pressure of SiO (g), and, as a result, it produced a porous surface layer. The depth variations of the oxidized layer were measured by SEM. In the ZrB2-SiC composite, the thickness of the reaction layer linearly increased as a function of time and showed active oxidation kinetics. The TaB2 addition to the ZrB2-SiC composite showed improved oxidation resistance with slight deviation from the linearity in depth variation.

• Korean Journal of Materials Research
• /
• v.16 no.3
• /
• pp.168-172
• /
• 2006

Single pulse of 2.0 to 3.5 kJ from $150{\mu}F$ capacitor was applied to the cp Ti rod for its surface modification and heat treatment. Under the conditions of using 2.0 and 2.5 kJ of input energy, no phase transformation has been occurred. However, the hardness and tensile strength decreased and the elongation increased after a discharge due to a slight grain growth. By using more than 3.0 kJ of input energy, the electro discharge made a phase transformation and the hardness at the edge of the cross section increased significantly. The Ti rod before a discharge was lightly oxidized and was primarily in the form of $TiO_2$. However, the surface of the Ti rod has been instantaneously modified by a discharge into the main form of TiN from $TiO_2$. Therefore, the electro discharge can modify its surface chemistry in times as short as $200{\mu}sec$ by manipulating the input energy, capacitance, and discharging environment.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.407-415
• /
• 1993

Sesame seeds were roasted for 30, 60, 90, and 120 min at different temperatures (100, 200, and $300^{\circ}C$) and extracted to investigate an adequate condition for producing the high quality sesame oil. Sesame seeds roasted at $200^{\circ}C$ for 90 min gave the high yield of oil. The oil contained the low content of brownish-black precipitates and exhibited an excellent organoleptic quality when judged by descriptive sensory analysis. Thirty one volatile flavor compounds, which are the largest number of volatiles among the oil samples prepared, were identified from the oil sample. The oil contained relatively high concentrations of furfurals (sweet candy-like flavor) and pyrazines (roasted-like flavor), that are considered as good contributors to sesame seed oil flavor, and low concentations of aldehydes $(C5{\sim}C10)$ and ketones, which are considerd as bad contributors (oxidized fat-like and painty-like flavors). These results suggest that the roasting condition of $200^{\circ}C$ for 90 min was the best for the oil production in terms of the overall aroma and taste quality under the test conditions (Received July 13, 1993; accepted November 4, 1993).