• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.218-221
• /
• 2009

Solid oxide fuel cells (SOFCs), as high-temperature fuel cells, have various advantages. In some merits of SOFCs, high temperature operation can lead to the capability for internal reforming, providing fuel flexibility. SOFCs can directly use CH4 and CO as fuels with sufficient steam feeds. However, hydrocarbons heavier than CH4, such as ethylene, ethane, and propane, induce carbon deposition on the Ni-based anodes of SOFCs. In the case of the ethylene steam reforming reaction on a Ni-based catalyst, the rate of carbon deposition is faster than among other hydrocarbons, even aromatics. In the reformates of heavy hydrocarbons (diesel, gasoline, kerosene and JP-8), the concentration of ethylene is usually higher than other low hydrocarbons such as methane, propane and butane. It is importatnt that ethylene in the reformate is removed for stlable operation of SOFCs. A new methodology, termed post-reforming was introduced for removing low hydrocarbons from the reformate gas stream. In this work, activity tests of some post-reforming catalysts, such as CGO-Ru, CGO-Ni, and CGO-Pt, are investigated. CGO-Pt catalyst is not good for removing ethylene due to low conversion of ethylene and low selectivity of ethylene dehydrogenation. The other hand, CGO-Ru and CGO-Ni catalysts show good ethylene conversion, and CGO-Ni catalyst shows the best reaction selectivity of ethylene dehydrogenation.

• 대한화학회지
• /
• 제28권2호
• /
• pp.109-113
• /
• 1984

여러가지 함량으로 은을 입힌$ Ag/{\alpha}-Al_2O_3$와 $Ag/SnO_2$상에서의 반응실험과 촉매의 Auger spectra, $SnO_2$에 흡착된 산소의 EPR spectra를 비교하여 담체의 종류가 에틸렌 산화반응의 활성과 선택성에 미치는 영향을 조사하였다. $SnO_2$상에서는 흡착산소중 O-가 반응에 참여하여 ethylene를 완전 산화하는 방향으로 유도하므로써 ethylene oxide 생성의 선택성을 저하시키는 것 같다.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.657-662
• /
• 2003

This paper presents a new fabrication method of selective SiGe epitaxial growth at 650 $^{\circ}C$ on (100) silicon wafer with oxide patterns by reduced pressure chemical vapor deposition. The new method is characterized by a cyclic process, which is composed of two parts: initially, selective SiGe epitaxy layer is grown on exposed bare silicon during a short incubation time by SiH$_4$/GeH$_4$/HCl/H$_2$system and followed etching step is achieved to remove the SiGe nuclei on oxide by HCl/H$_2$system without source gas flow. As a result, we noted that the addition of HCl serves not only to reduce the growth rate on bare Si, but also to suppress the nucleation on SiO$_2$. In addition, we confirmed that the incubation period is regenerated after etching step, so it is possible to grow thick SiGe epitaxial layer sustaining the selectivity. The effect of the addition of HCl and dopants incorporation was investigated.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3679-3683
• /
• 2010

Niobium oxide ($Nb_2O_5$) and phosphated $Nb_2O_5$ were synthesized and used as catalysts for sorbitol dehydration to isosorbide. The characterization results of $N_2$ adsorption, XRD and $NH_3$-TPD revealed that the phosphoric acid modification could well prevent the crystallization of $Nb_2O_5$. And the amorphous phosphated $Nb_2O_5$ catalysts kept the relatively large surface area and stable acidity at high calcination temperature. The catalytic results showed that the selectivity to isosorbide could be dramatically enhanced over phosphated $Nb_2O_5$. The excellent catalytic performance with 100.0% sorbitol conversion and 62.5% isosorbide selectivity were obtained over the 0.8P/NBO-400 catalyst. Comparing with $Nb_2O_5$ catalysts, phosphated $Nb_2O_5$ catalysts regenerated through a simple calcination process showed no significant activity loss after recycling three runs.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.27-30
• /
• 1999

Poly(phenylene oxide)s were used to prepare flat, integrally skinned self-supporthed asymmetric membranes by dry-wet phase separption. The intrinsic ideal gas selectivity of poly- (2,6-dimethy-1,4-phenylene oxide) (PMPO) was retained in the membranes, and improved by a coating with silicone rubber. Polymers of the same class were coated of UF supports with a silicon rubber gutter layer, yielding composite membranes with high flux but lower selectivity. The effect of th glutaraldehyde cross-linking of sodium alginate (SA) membranes on the mobility of water and ethanol has been studied with pfg nmr. Crosslinking reduces water self-diffusion, and does not seem to be stable on the timescale of weeks.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.157-162
• /
• 2006

Chemical-mechanical polishing (CMP), one of the dominant technology for ULSI planarization, is used to flatten the micro electro-mechanical systems (MEMS) structures. The objective of this paper is to achieve good planarization of the deposited film and to improve deposition efficiency of subsequent layer structures by using surface-micromachining process in MEMS technology. Planarization characteristic of poly-Si film deposited on thin oxide layer with MEMS structures is evaluated with different slurries. Patterns used for this research have shapes of square, density, line, hole, pillar, and micro engine part. Advantages of CMP process for MEMS structures are observed respectively by using the test patterns with structures larger than 1 urn line width. Preliminary tests for material selectivity of poly-Si and oxide are conducted with two types of silica slurries: $ILD1300^{TM}\;and\;Nalco2371^{TM}$. And then, the experiments were conducted based on the pretest. A selectivity and pH adjustment of slurry affected largely step heights of MEMS structures. These results would be anticipated as an important bridge stone to manufacture MEMS CMP slurry.

• 센서학회지
• /
• 제29권6호
• /
• pp.382-387
• /
• 2020

Hydrogen (H₂) is considered as a new clean energy resource for replacing petroleum because it produces only H₂O after the combustion process. However, owing to its explosive nature, it is extremely important to detect H₂ gas in the ambient atmosphere. This has triggered the development of H₂ gas sensors. 2-dimensional (2D) graphene has emerged as one of the most promising candidates for chemical sensors in various industries. In particular, graphene exhibits outstanding potential in chemoresistive gas sensors for the detection of diverse harmful gases and the control of indoor air quality. Graphene-based chemoresistive gas sensors have attracted tremendous attention owing to their promising properties such as room temperature operation, effective gas adsorption, and high flexibility and transparency. Pristine graphene exhibits good sensitivity to NO₂ gas at room temperature and relatively low sensitivity to H₂ gas. Thus, research to control the selectivity of graphene gas sensors and improve the sensitivity to H₂ gas has been performed. Noble metal decoration and metal oxide decoration on the surface of graphene are the most favored approaches for effectively controlling the selectivity of graphene gas sensors. Herein, we introduce several strategies that enhance the sensitivity of graphene gas sensors to H₂ gas.

• 공업화학
• /
• 제4권2호
• /
• pp.308-317
• /
• 1993

본 연구는 Mo-V-W 다성분 혼합산화물 촉매상에서 아크로레인의 선택산화에 의한 아크릴산의 합성에 관한 것이다. Mo-V-W-O(WVM), Mo-V-O/Mo-W-O(VM/WM), Mo-W-O/Mo-V-O(WM/VM) 그리고 Mo-V-O와 Mo-W-O의 기계적 혼합물 촉매(M-VM+WM)를 제조하여 BET, XRD, SEM, EPMA로 특성분석을 실시하였고 이들 촉매의 활성을 고정층 연속반응기에서 조사하였다. WVM 촉매의 경우 VM 촉매에 첨가된 소량의 텅스텐은 비표면적과 아크릴산의 선택도를 증가시켰으나 과량의 텅스텐은 아크로레인의 반응속도와 선택도를 감소시켰다. 담체로 사용한 WM 위에 VM이 존재하는 VM/WM 촉매의 활성과 선택도가 VM을 담체로 사용한 WM/VM 촉매보다 우수한 것으로 나타났고 WM과 VM의 기계적 혼합물 촉매는 상간협동 현상이 관찰되어 WM이나 VM 촉매보다 높은 수율을 나타내었다.

• 멤브레인
• /
• 제27권2호
• /
• pp.147-153
• /
• 2017

본 연구에서는 poly(ethylene oxide) (PEO)와 poly(ethylene-co-vinyl acetate) (EVA) 혼합으로 구성된 막을 통한 단일기체($N_2$, $O_2$, $CO_2$)의 투과 성질을 조사하였다. FT-IR 분석 결과 제조된 막에서 새로운 흡수피크는 보이지 않았는데, 이것은 PEO와 EVA가 물리적으로 혼합되었음을 나타낸다. SEM 관찰에서는 PEO/EVA 혼합 매트릭스에서 EVA 함량이 증가함에 따라 PEO의 결정상이 감소함을 보여 주었다. DSC 분석결과 PEO/EVA 혼합막의 결정화도는 EVA 함량이 증가함에 따라 감소하였다. 기체투과 실험은 4~8 bar의 공급압력에서 이루어졌다. PEO/EVA 혼합막에서 $CO_2$의 투과도는 공급 압력 증가에 따라 증가하였다. 그러나 $N_2$와 $O_2$의 투과도는 공급 압력에 무관하였다. 반면에, PEO/ EVA 혼합막의 모든 기체의 투과도는 반결정성 PEO에서 무정형 EVA의 함량이 증가함에 따라 증가하였다. 특히, 40 wt% EVA 혼합막은 64 Barrer의 $CO_2$ 투과도와 61.5의 $CO_2/N_2$ 이상선택도를 보였다. 높은 $CO_2$ 투과도와 $CO_2/N_2$ 이상선택도는 PEO의 극성 에테르기 또는 EVA의 극성 에스터기와 극성 $CO_2$ 간의 강한 친화성에 기인한다.

• 멤브레인
• /
• 제28권2호
• /
• pp.105-112
• /
• 2018

본 연구는 GO (graphene oxide)를 활용한 기체 분리막 연구를 위해 기체투과도가 우수한 PTMSP [poly(1-trimethylsilyl-1-propyne)]에 GO를 첨가하여 PTMSP-GO 고분자 복합막을 제조하고, $N_2$, $CH_4$, $CO_2$에 대한 투과특성을 연구하였다. PTMSP-GO 복합막의 기체투과는 $N_2$ < $CH_4$ < $CO_2$ 순으로 높은 기체투과도 값을 가졌다. $N_2$, $CH_4$, $CO_2$의 기체투과 경향은 GO 함량 0~10 wt% 범위에서 함량이 증감함에 따라 기체투과도가 감소하다가 10~30 wt% 범위에서 증가하는 현상을 보였다. 적은 GO 함량범위에서는 복합막 내에서 GO가 barrier로 작용하여 확산성 감소로 기체투과도가 감소하였고, 일정 함량범위 이상에서는 계면에 생기는 void로 인해 기체투과도가 증가하였다. 그리고 $CO_2$는 GO의 -COOH에 친화성을 가지고 있어 선택도($CO_2/N_2$)와 선택도($CO_2/CH_4$)는 GO 함량이 증가하면서 점차 증가하는데 선택도($CO_2/N_2$)는 PTMSP-GO 10 wt%에서 10.6로 가장 높은 선택도를 보였고, 선택도($CO_2/CH_4$)는 PTMSP-GO 20 wt%에서 3.4로 가장 높은 선택도를 보였다. 그러나 일정 함량 이상에서 선택도($CO_2/N_2$)와 선택도($CO_2/CH_4$) 모두 감소하였는데 GO 함량이 많아지면서 GO 충진물 간의 응집현상이 심해지고, GO 응집물로 인하여 $CO_2$에 대한 용해도 효과가 낮아져 선택도가 감소되었다. PTMSP-GO 20 wt% 복합막은 PTMSP 단일막보다 증가된 $CO_2$ 투과도와 선택도($CO_2/CH_4$)를 보이면서 기체투과 특성이 향상되었다.