• 제목/요약/키워드: Oxidation State

검색결과 587건 처리시간 0.028초

Purification and Characterization of Laccase from Wood-Degrading Fungus Trichophyton rubrum LKY-7

  • Hyunchae Jung;Park, Chongyawl;Feng Xu;Kaichang Li
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2001년도 춘계학술발표논문집
    • /
    • pp.18-25
    • /
    • 2001
  • A new wood-degrading fungus Trichophyton rubrum LKY-7 secretes a high level of laccase in a glucose-peptone liquid medium. The production of laccase by the fungus was barely induced by 2,5-xylidine. The laccase has been purified to homogeneity through three chromatography steps in an overall yield of 40%. The molecular mass of the purified laccase was about 65 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The purified laccase had the distinct blue color and had basic spectroscopic features of a typical blue laccase: two absorption maxima at 278 and 610 nm and a shoulder at 338 nm. The N-terminus of the laccase has been sequenced, revealing high homology to laccases from wood-degrading white-rot fungi such as Ceriporiopsis subvermispora. The enzyme had a "low" redox potential (0.5 V vs normal hydrogen electrode), yet it was one of the most active laccases in oxidizing a series of representative substrates/mediators. Compared with other fungal laccases, the laccase has a very low Km value with ABTS [2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid] as a substrate and a very high Km value with violuric acid as a substrate. The laccase has the isoelectric point of 4.0. The laccase had very acidic optimal pH values (pH 3-4) while it was more stable at neutral pH than at acidic pH. The laccase oxidized hydroquinone faster than catechol and pyrogallol. The oxidation of tyrosine by the laccase was not detectable under the reaction conditions. The laccase was strongly inhibited by sodium azide and sodium fluoride. fluoride.

  • PDF

Influence of high energy electron beam treatment on the photocatalytic activity of $TiO_2$ nanoaparticles on carbon fiber

  • 심채원;김명주;서현욱;김광대;닐로이 쿠마르 데;김동운;남종원;정명근;이병철;박지현;김영독
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.441-441
    • /
    • 2011
  • $TiO_2$ nanoparticles were grown on carbon fiber by atomic later deposition (ALD) with TTIP $(Ti(OCH(CH_3)_2)_4$ and $H_2O$ precusors. After sampe surfaces were treated by electron beam (1 MeV, 5 KGy), an improvement in the photocatalytic reacitivity of $TiO_2$ nanoparticles on carbon fiber was observed. An increase in the population of hydroxyl group on $TiO_2$ particles and the oxidation of carbon fiber were found upon e-beam exposure, whereas there was no noticeable changes of their morphology. It implies that those changes in O and C 1s state of $TiO_2$ particles/carbon fiber induced by e-beam treatment could be related to the enhancement of the photocatalytic activity. In contrast, when carbon fiber fully covered with $TiO_2$ thick films was treated with high-energy electron beam under same conditions, the improvement of photocatalytic activity as well as any changes in XPS spectra (Ti 2p, O 1s and C 1s) could not be found.

  • PDF

Electronic Structure of Ce-doped ZrO2 Film: Study of DFT Calculation and Photoelectron Spectroscopy

  • Jeong, Kwang Sik;Song, Jinho;Lim, Donghyuck;Kim, Hyungsub;Cho, Mann-Ho
    • Applied Science and Convergence Technology
    • /
    • 제25권1호
    • /
    • pp.19-24
    • /
    • 2016
  • In this study, we evaluated the change of electronic structure during redox process in cerium-doped $ZrO_2$ grown by sol gel method. By sol-gel method, we could obtain cerium-doped $ZrO_2$ in high oxygen partial pressure and low temperature. After post annealing process in nitrogen ambient, the film is deoxidized. We used spectroscopic and theoretical methods to analysis change of electronic structure. X-ray absorption spectroscopy (XAS) for O K1-edge and Density Functional Theory (DFT) calculation using VASP code were performed to verify the electronic structure of the film. Also, high resolution x-ray photoelectron spectroscopy (HRXPS) for Ce 3d was carried out to confirm chemical bond of cerium doped $ZrO_2$. Through the investigation of the electronic structure, we verified as followings. (1) During reduction process, binding energy of oxygen is increase. Simultaneously, oxidation state of cerium was change to 4+ to 3+. (2) Cerium 4+ and cerium 3+ states were generated at different energy level. (3) Absorption states in O K edge were mainly originated by Ce 4+ $f_0$ and Ce 3+, while occupied states in valance band were mainly originated from Ce 4+ $f_2$.

다중금속복합층 핵연료 피복관의 필거링 공정에 관한 유한 요소 해석 연구 (Finite Element Analysis of Pilgering Process of Multi-Metallic Layer Composite Fuel Cladding)

  • 김태용;이정현;김지현
    • 한국압력기기공학회 논문집
    • /
    • 제13권2호
    • /
    • pp.75-83
    • /
    • 2017
  • In severe accident conditions of light water reactors, the loss of coolant may cause problems in integrity of zirconium fuel cladding. Under the condition of the loss of coolant, the zirconium fuel cladding can be exposed to high temperature steam and reacted with them by producing of hydrogen, which is caused by the failure in oxidation resistance of zirconium cladding materials during the loss of coolant accident scenarios. In order to avoid these problems, we develop a multi-metallic layered composite (MMLC) fuel cladding which compromises between the neutronic advantages of zirconium-based alloys and the accident-tolerance of non-zirconium-based metallic materials. Cold pilgering process is a common tube manufacturing process, which is complex material forming operation in highly non-steady state, where the materials undergo a long series of deformation resulting in both diameter and thickness reduction. During the cold pilgering process, MMLC claddings need to reduce the outside diameter and wall thickness. However, multi-layers of the tube are expected to occur different deformation processes because each layer has different mechanical properties. To improve the utilization of the pilgering process, 3-dimensional computational analyses have been made using a finite element modeling technique. We also analyze the dimensional change, strain and stress distribution at MMLC tube by considering the behavior of rolls such as stroke rate and feed rate.

경산 임당고분 출토 철제 고리자루칼 칠의 유기물 분석 (Organic Material Analysis of a Lacquered Wooden Sheath of Long Sword with Ring Pommel Excavated in Imdang Ancient Tomb)

  • 박종서;조하늬;이재성
    • 보존과학회지
    • /
    • 제34권5호
    • /
    • pp.369-377
    • /
    • 2018
  • 경북 경산에 위치한 원삼국시대 고분인 임당1호분에서 출토된 칠초 철제 고리자루칼의 칠편에 대해 칠의 구성성분과 풍화상태를 확인하기 위해 열분해/GC/MS법으로 유기물을 분석하였다. 직접 열분해/GC/MS법에서 칠편과 원주산 건조옻이 대체적으로 유사한 크로마토그램을 보였다. THM(thermally assisted hydrolysis and methylation)-열분해/GC/MS법의 경우 칠편에서 한국에 자생하는 옻나무 종의 특징적인 성분(1,2-dimethoxy-3-pentadecylbenzene 등)이 관찰되었다. 또한, dimethyl nonanedioate 등 건성유에서 비롯되는 것으로 보이는 성분도 검출되었다. 칠편에서 산화된 catechol 성분이 다량 검출되는 것으로 보아 칠의 열화가 우루시올 성분의 산화와 관련 있을 것으로 추정된다. 이로부터 임당1호분 고리자루칼 칠은 옻과 건성유를 사용하였고 오랜 시간의 경과로 산화가 많이 진행된 상태인 것으로 판단된다.

Mn/$TiO_2$ 촉매를 이용한 저온 SCR 반응에서 산소의 영향 (The Effect of Oxygen in Low Temperature SCR over Mn/$TiO_2$ Catalyst)

  • 이상문;최현진;홍성창
    • 공업화학
    • /
    • 제23권1호
    • /
    • pp.119-123
    • /
    • 2012
  • 본 연구는 Mn/$TiO_2$ 촉매를 이용한 저온 $NH_3$-SCR 반응에서 산소의 역할에 대한 영향을 기술하였다. 촉매의 격자산소는 저온 SCR 반응에 참여하며, 기상의 산소는 환원된 촉매를 재산화 시키는 역할을 한다. 이러한 산소의 redox 특성은 SCR 반응활성에 중요한 요소로 작용하며, 격자산소의 이용능력은 표면에 노출된 망간의 산화상태에 큰 영향을 받는다. $TiO_2$ 담체 표면에 존재하는 Mn이 $MnO_2$의 망간산화물 형태로 존재할 때가 $Mn_2O_3$의 형태로 존재할 때보다 우수한 redox 특성을 가지며, 이러한 망간의 산화상태는 $TiO_2$의 비표면적에 큰 영향을 받는다.

페루 남동부 아뿌리막주 트라피체 동-몰리브데늄 광상의 지질 및 광화작용 (Geology and Mineralization in Trapiche Cu-Mo Deposit, Apurimac State in Southeastern Peru)

  • 양석준;허철호;김유동
    • 자원환경지질
    • /
    • 제48권6호
    • /
    • pp.525-536
    • /
    • 2015
  • 트라피체 프로젝트는 현재 탐사단계 중 후기(Advanced exploration)단계의 프로젝트이며 안다우아일라스-야우리 광상구 연변에 나타나는 다양한 반암 광상 중 일부라고 볼 수 있다. 이 광상은 몬조나이트 반암의 관입과 관계가 있으며, 또한, 올리고세 각력 파이프와 밀접한 관계를 가지고 있는 광상이다. 광화작용은 일차 유화광물인 황철석, 황동석, 반동석 및 휘수연석으로 구성된다. 2차 유화광물인 휘동석, 코벨라이트, 다이게나이트가 산출되며 산화동으로서 공작석, 흑동석, 적동석등이 산출된다. 침출작용(lixiviation)이나 부화과정 결과로서, 광화작용은 비전형적인 누대구조를 보여주기도 한다. 각력과 반암이 나타나는 구역에서는 수직적인 누대구조를 보여주는데, 북쪽 인근에서는 침출대, 2차부화대, 전이대 및 초생광화대가 나타나고 광상의 서쪽에서는 산화대 및 혼합대가 좁게 나타난다. 광상의 추정자원은 920 Mt @ 0.41% Cu이며 한계품위는 0.15%로 산정하고 있다.

Influence of Crystal Structure on the Chemical Bonding Nature and Photocatalytic Activity of Hexagonal and Cubic Perovskite Compounds

  • Lee, Sun-Hee;Kim, In-Young;Kim, Tae-Woo;Hwang, Seong-Ju
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권4호
    • /
    • pp.817-821
    • /
    • 2008
  • We have investigated the influence of the crystal structure on the chemical bonding nature and photocatalytic activity of cubic and hexagonal perovskite A[$Cr_{1/2}Ta_{1/2}$]O3 (A = Sr, Ba) compounds. According to neutron diffraction and field emission-scanning electron microscopy, the crystal structure and particle size of these compounds are strongly dependent on the nature of A-site cations. Also, it was found that the face-shared octahedra in the hexagonal phase are exclusively occupied by chromium ions, suggesting the presence of metallic (Cr-Cr) bonds. X-ray absorption and diffuse UV-vis spectroscopic analyses clearly demonstrated that, in comparison with cubic Sr[$Cr_{1/2}Ta_{1/2}$]$O_3$ phase, hexagonal Ba[$Cr_{1/2}Ta_{1/2}$]$O_3$ phase shows a decrease of Cr oxidation state as well as remarkable changes in interband Cr d-d transitions, which can be interpreted as a result of metallic (Cr-Cr) interactions. According to the test of photocatalytic activity, the present semiconducting materials have a distinct activity against the photodegradation of 4-chlorophenol. Also the Srbased compound was found to show a higher photocatalytic activity than the Ba-based one, which is attributable to its smaller particle size and its stronger absorption in visible light region.

화학I 교과서에 나타난 중금속 용어와 개념의 고찰 (Studies of the Concept and Terminology of Heavy Metals Described in the Chemistry I Textbook)

  • 문경아;채희권
    • 대한화학회지
    • /
    • 제51권6호
    • /
    • pp.560-568
    • /
    • 2007
  • 이 연구의 목적은 한국 중등학교 과학 교과서에 기술된 화학적으로 불분명한 ‘중금속' 용어에 대해 정의, 종류 및 의미의 항목으로 알아보았다. 예비 결과에 의하면 교과서중에서 ‘화학 I' 교과서 8종 중 6종에 서 비중을 근거로 중금속을 정의하고 있으며 또 인체에 유해하고 지속적으로 축적되는 금속으로 묘사하고 있 다. 특히 8종의 모든 교과서에서 중금속의 예로 카드뮴, 납 그리고 수은을 제시하고 있으나 비소와 같은 비금 속이나 크롬, 망간, 철, 코발트, 니켈 그리고 구리 같은 인체 필수 미량 금속도 들어 있었다. 금속의 독작용을 이해함에 있어서 금속의 산화상태, 생체 내 존재량, 생체 성분과의 반응성을 고려해야 하지만 교과서에서 이에 대한 단편적인 예만 제시하고 있었다. 화학적으로 정의되지 못한 용어는 학생들로 하여금 중금속은 독소와 동 일할 수 있다는 대안 개념을 유발시킬 수 있으므로 이러한 모호한 정의와 설명은 교과서에서 지양되어야 한다.

Elucidation of Antioxidant Activity of Phosvitin Extracted from Egg Yolk using Ground Meat

  • Jung, Samooel;Jo, Cheo-Run;Kang, Min-Gu;Ahn, Dong-Uk;Nam, Ki-Chang
    • 한국축산식품학회지
    • /
    • 제32권2호
    • /
    • pp.162-167
    • /
    • 2012
  • Phosvitin was extracted from a chicken egg yolk and the iron-binding, along with antioxidative activity of the extracted phosvitin, was determined after mixing with ground beef at the concentrations of 100 and 500 mg/kg of meat. The electrophoretic pattern of the extracted phosvitin on SDS-PAGE was found to be identical to that of the standard phosvitin. The extracted phosvitin at $1,000{\mu}g$/mL showed an ability to bind approximately 65% of the iron in a 3 mM iron solution. Lipid oxidation was inhibited in the ground beef mixed with 500 mg/kg of the extracted phosvitin, during storage at $4^{\circ}C$ compared to that of the control (p<0.05). Additionally, color stability of ground beef containing the extracted phosvitin was enhanced (p<0.05). The pH, cooking loss, texture, and sensory properties of the ground beef were not affected, by adding up to 500 mg/kg of the extracted phosvitin. This result suggests that the phosvitin extracted from egg yolk could be used as an antioxidant reagent. In particular, phosvitin would be more amenable for use in meat products because it is a natural protein derived from animal products.