• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.281-291
• /
• 2012

Recently, global economy has recovered and aspects of the renewable energy industry in the global competition is more fierce, the new growth engines of the major countries, including the United States and China, industry promotion policy as being deployed. Major advanced countries and Korea also invested a lot of money to wind power development as a part of renewable energy development and promoting the construction of wind power generation. The global wind power generation market is expected to further increase the scale to about 70 billion US dollars, thus, Korea as well as the installation of domestic wind power overseas actively considering. This study uses input-output analysis to estimate the role of wind power generation sector exports national economy. More specifically, this study shows what national economy effect of production-inducing effect, value-added inducing effect, and employment-inducing effect are explored with demand-driven moel. After define wind power generation sector what small sized of Input-Output table 168 sectors among 11 sectors, this study pays particular and close attention to wind power generation sector by taking the sector as exogenous specification and then investigating economic impacts of it. The wind power generation exportation case of overseas 100 billion won, production-inducing effect, value-added inducing effect, and employment-inducing effect are 205 billion won, 68 billion won and 1,054 persons, respectively. These quantitative information can be usefully utilized in the policy-making for the industrialization of wind power generation exports.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.507-513
• /
• 2021

GPR (Ground Penetrating RADAR) is a sensor that inspects the pavement state of roads, sinkholes, and underground pipes. It is widely used in road management. MMS (Mobile Mapping System) creates a detailed and accurate road map of the road surface and its surroundings. If both types of data are built in the same area, it is efficient to construct both ground and underground spatial information at the same time. In addition, since it is possible to grasp the road and important facilities around the road, the location of underground pipelines, etc. without special technology, an intuitive understanding of the site is also possible, which is a useful tool in managing the road or facilities. However, overseas equipment to which this latest technology is applied is expensive and does not fit the domestic situation. LiDAR (Light Detection And Raging) and GNSS/INS (Global Navigation Satellite System / Inertial Navigation System) were synchronized in order to replace overseas developed equipment and to secure original technology to develop domestic equipment in the future, and GPR data was also synchronized to the same GNSS/INS. We developed software that performs georeferencing using the location and attitude information from GNSS/INS at the time of acquiring synchronized GPR data. The experiments were conducted on the road site by dividing the open sky and the non-open sky. The road and surrounding facilities on the ground could be easily checked through the 3D point cloud data acquired through LiDAR. Georeferenced GPR data could also be viewed with a 3D viewer along with point cloud data, and the location of underground facilities could be easily and quickly confirmed through GPR data.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.333-345
• /
• 2021

Amid the rapidly changing logistics environment and demand changes in the post-corona-19 era, the importance of the cold chain logistics sector is being highlighted. The scope of cold chain is not limited to food, but is expanding to various fields such as pharmaceuticals, semiconductors, and flowers. The demand on the storage and transportation of corona vaccines is rapidly increasing. The rapid increase in domestic low-temperature facility construction and renovation may lead to the saturation of the cold chain related industry in the future and slow growth. In preparation for this, it is necessary to accumulate infrastructure know-how using IT technologies, and to consider entering into the UN procurement market as a potential niche market, by taking advantage of Korea's recent global status. The demand for cold chain in the UN procurement market is increasing mainly in underdeveloped countries, and it is expected to continue to grow. In this paper, the capabilities of domestic cold chain related companies were analyzed, domestic and overseas cold chain logistics market trends and overseas market entry status were investigated. An in-depth survey was conducted to present strategies for domestic cold chain logistics related companies to enter the UN procurement market.

• The Research Journal of the Costume Culture
• /
• v.8 no.6
• /
• pp.853-863
• /
• 2000

This study is planned to present the future direction of the study of Korean clothes through the realistic recognition of the changes of studying issues of each area of the related clothes. For this purpose, the writer of this thesis have collected, classified and analyzed those various kinds of papers and theses published in the professional magazines of clothes such as Journal of Korean Home Economics, Journal of the Korean Society of Clothing and Textiles, Journal of the Korean Society of Costume, The Research Journal of the Costume Culture so that I might examine and study the main trend of the related study. The result of the study is as follows. 1. Since the first publication of Journal of Korean Home Economics in 1959 and Journal of the Korea Society of Clothing and Textiles, and Journal of the Korean Society of Costume, the study of clothes has been gradually increased. Furthermore, since 1990 the issuing times of various kinds of Journals have been continuously increased with the foundation of The Research Journal of the Costume Culture and Journal of Fashion Business. 2. Theses and papers published in the four greatest Journals of Korean Clothing and Textiles have been studies for the detailed classification and analysis of the data. According to the study, It is found that the theses in Journal of the Korea Society of Clothing and Textiles have actively studied textiles as they had studied before 1990s and those in Journal of the Korean Society of Costume have studied history of costumes and those in The Research Journal of the Costume Culture have studied the composition and science of clothes. 3. The order of studying subjects was 1) Design and Aesthetics, 2) Fashion Merchandising 3) Textiles, 4) Clothing Construction, 5) History of Costumes, 6) Costume Culture, 7) Socio-Psychology of clothing, 8) Others. Considering the above mentioned result of the study, most of the main fields of the clothing and textiles study have been studied continuously in balance since 1990 unlike the past although the past studies had been performed largely in some main fields only. And it was found that fields of clothing styles and clothing goods have been studied most actively since 1990s. 4. The studying field of Design and Aesthetics has showed to have the trend to be studied very actively since 1990s, which has utilized various relevant data with scholastic approach to psychology and aesthetics. Regarding Fashion Merchandising, the study of consumers decision process has been performed most actively. And theses on the international trades have been published considerably more than ever before, which resulted in gradual increase in gradual increase in the study of the fields related with global marketing, internet marketing, textile products exports, and overseas brands, etc. Regarding Textiles, the field of clothing sanitation and management has been studied more actively than that of clothing materials. In case of clothing construction, the study of physical styles and pattern making has been more active than the other related fields. Fields of socio-psychology of clothing and history costume have been a little reduced. Field of costume culture has been firmly rooted as an independent subject to be studied in the clothing related study. And study of the clothes has shown various trends of studies of ethnic & folk clothes, religious and ceremonial garments, linguistic & favorite approach to clothes and academic analysis of the data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.324-334
• /
• 2017

The simulators for a plant unit master control (UMC) developed by domestic or overseas researchers have been developed for operator-training purposes. UMC simulators normally constructed at the end of the plant construction, despite the UMC logics, should be simulated to pre-check many signal interfaces within the power generation systems. Because of the differences in construction schedule, it is difficult for logic designers or commissioning engineers to simulate the UMC logic during the design or commissioning stage. In this background, this paper proposes a simulation method that can be used easily by plant logic designers or operators in the MATLAB Simulink programming environment. The core of the UMC is realized with a unique simulation algorithm based on mathematical analysis and functional blocks combination. In addition, an integer-based configuration was proposed to realize the plant target value control for the equipment in the logic. With these simulation methods, functions, e.g., load distribution, high-low limitations, frequency compensation, etc. were simulated. The results showed that the plant UMC logic can be simulated in Simulink without a plant simulator. The various functions proposed in this paper can provide useful information about Simulink-based simulation design for plant logic designers or commissioning engineers during the power plant construction period.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.92-104
• /
• 2014

CM services have been increasingly practiced over the two decades in the Korean construction industry, and recent efforts focus on further development in advanced CM capabilities and expansion to overseas market. However, there has been lack of holistic research to investigate current status and future direction of CM industry in Korea. In this context, the purposes of this study are 1) to analyze current status of Korean CM industry in terms of owners, market, CM firms, contracts, and work scopes, 2) to define different types of CM practices, and 3) to propose growth models for Korean CM firms based on the defined CM project types. An extensive literature review and statistical analysis of 2012 CM contracts were performed in order to analyze the CM status. Based on the analyses, ten different CM types are defined, and growth paths of CM firms are illustrated. Implications and lessons learned during the statistical analysis and workshops are briefly introduced as well.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.3-11
• /
• 2021

Myanmar is an undeveloped country with high development value among Asian countries. Therefore, various countries including the U.S. are considering entering the market. In this respect, demand for real estate development project is forecast to grow on increased inflow of foreigners and Myanmar's economic growth. However, Myanmar is a high-risk country in terms of overseas companies, including national risk. In this study, we conducted an in-depth interview with experts (law, finance, technology, and local experts) after analyzing data on Myanmar to extract risk-causing factors. Through this, 106 risk factors were extracted, and the final risk classification system was established by conducting three-time groupings using the affinity diagramming. And the relative importance of each factor was presented using the analytic hierarchy process (AHP) technique. As a result, the country-related risk, the fund-related risk, and the pre-sale-related risk were highly important. The research results are expected to provide risk management standards to companies entering the Myanmar real estate development type project.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.12-21
• /
• 2023

Green remodeling proposed in the Korean New Deal is a project to build or remodel eco-friendly and energy-efficient buildings using renewable energy facilities and high-performance insulation for public buildings. The government intends to achieve the carbon emission reduction target by conducting green remodeling. Major overseas cities that conduct green remodeling are actively promoting technology support and promotion along with energy performance evaluation according to building characteristics, subsidies for private revitalization, and tax benefits. With this background, the analysis of the current status and problems of the green remodeling project was performed and the Activation factors of Green Remodeling were derived from survey results. This study suggested strategic measures such as a participation of civil society, promotion, and priority selection of administration and policy measures such as a leading role of the public sector, expanding support for the socially underprivileged, and financial support and tax benefits. And this study results are expected to be utilized as basic data to promote the green remodeling project.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.7-22
• /
• 2023

In January 2022, a new legislation was enforced to enhance the safety of underground construction. Consequently, a comprehensive assessment of underground safety is now an integral part of the planning process, including an evaluation of its impact. Ensuring the stability of temporary retaining walls during underground excavation has become paramount, prompting a heightened focus on the assessment of underground safety. This study delves into the analysis of the Multi-axis Flat Continuous Soil Cement Wall retaining wall (MFS) construction method. This method facilitates the expansion of wall thickness in the ground and provides flexibility in selecting and spacing H-piles. Through laboratory model tests, we scrutinized the load-displacement behavior of the wall, varying the H-pile installation intervals using the MFS method. Additionally, a 3-dimensional numerical analysis was conducted to explore the influence of H-pile installation intervals and sizes on the load for different thicknesses of the MFS retaining wall. The displacement analysis yielded the calculation of the height of the arching effect acting on the wall. To further our understanding, a design method was introduced, quantitatively analyzing the results of axial force and shear force acting on the wall. This involved applying the maximum arching height, calculated by the MFS method, to the existing member force review method. The axial force and shear force, contingent on the H-pile installation interval and size applied to the MFS retaining wall, demonstrated a reduction effect ranging from 24.6% to 62.9%.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.52-62
• /
• 2017

Overseas landscape practices have already benefited from the awareness of BIM while landscape-related organizations are encouraging its use and the number of landscape projects using BIM is increasing. However, since BIM has not yet been introduced in the domestic field, this study investigated and analyzed overseas landscape projects and discussed the positive effects and implementation of BIM. For this purpose, landscape projects were selected to show three effects of BIM: improvement of design work efficiency, building of a platform for cooperation, and performance of topography design. These three projects were analyzed across four aspects of implementation methods: landscape information, 3D modeling, interoperability, and visualization uses of BIM. First, in terms of landscape information, a variety of building information was constructed in the form of 3D libraries or 2D CAD format from detailed landscape elements to infrastructure. Second, for 3D modeling, a landscape space including simple terrain and trees was modeled with Revit while elaborate and complex terrain was modeled with Maya, a professional 3D modeling tool. One integrated model was produced by periodically exchanging, reviewing, and finally combining each model from interdisciplinary fields. Third, interoperability of data from different fields was achieved through the unification of file formats, conversion of differing formats, or compliance with information standards. Lastly, visualized 3D models helped coordination among project partners, approval of design, and promotion through public media. Reviewing of the case studies shows that BIM functions as a process to improve work efficiency and interdisciplinary collaboration, rather than simply as a design tool. It has also verified that landscape architects could play an important role in integrated projects using BIM. Just as the introduction of BIM into the architecture, engineering and construction industries saw great benefits and opportunities, BIM should also be introduced to landscape architecture.