• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.69-74
• /
• 2011

Despite most of tasks in manufacturing, construction and agriculture, etc., were currently mechanized and automated, manual materials handling still existed in atypical working condition. In case of manual materials handling, repetitive work, inappropriate working posture, excessive force, contact stress might cause overload, which could lead to work-related musculoskeletal disorders and low back pains. On this basis, the goal of this study is to reveal the effects of various lifting postures of trunk angles and lower extremity postures on maximum holding time(MHT). Twenty two subjects were recruited from a university population. The experiment was designed by a combination of three trunk angle ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) and three lower extremity postures(straight, bent, kneeling). Before experimental trials, subjects performed MVC(maximum voluntary contraction) exertions in three trunk angles ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) to calculate 30%MVC at designated postures. In each trial, they were required to hold the handheld load(30%MVC) for a designated posture as long as they could. The results of MVC by trunk angles were measured in $0^{\circ}$ > $20^{\circ}$ > $60^{\circ}$ orders, but those of MHT measured in $20^{\circ}$ > $0^{\circ}$ > $60^{\circ}$ orders. These results showed that straight posture is the ideal working posture in work exerted a strong force for a short time, but the ability to work might be improved in the trunk angle $20^{\circ}$ in work required 30%MVC for a long time. Also, results of MVC and MHT by lower extremity postures measured in straight > bent > kneeling orders.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.80-86
• /
• 2011

Investigation of the effective soil thermal conductivity(k) is the first step in designing the ground loop heat exchanger(borehole) of a geothermal heat pump system. Another important factor is the borehole thermal resistance($R_b$). Thermal response tests offer a good method to determine the ground thermal properties for the total heat transport in the ground. This is done by supplying a constant heat power into a borehole heat exchanger. There are two methods to supply a constant heat power. One is to employ the electricity provided by Korea Electric Power Corporation(KEPCO). The other is to use electricity generated by a generator. In this study, the power supply regulation was found to reduce when the electricity generated by the generator was used. This is because the generator evaluated with the power supply characteristically reduces the power supply regulation between an overload and a complex using. But it sometimes occurs a power supply regulation in In-situ thermal response test. In this case getting of k,$R_b$ requires delay times and restored normal state. However, the effect of the delay times and restored normal state on the soil thermal conductivity and borehole thermal resistance is very small. Therefore it is possible to use a generally accepted delay times and restored normal state in the analysis. In this work, it is also shown that an acceptable range of ${\Delta}k$, ${\Delta}R_b$ for normal state and regulation state might be approximately 0.01-0.16W/m k, and -0.004-0.007m K/W, respectively. Thus, restored normal state of power supply regulation is valuable to recommend.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.139-145
• /
• 2019

This study investigates the factors of job stress from working environment of employees' in the IT relative industry and explore its effects on both job involvement and affective commitment. 15 companies and individuals(IT freelancers) working in Seoul and Gyeonggi Provence were chosen for this study. Data were collected for 4 weeks from May 27 to June 28, 2019. A total of 400 employees' were attended in this research and finally 352 samples were used for the empirical analysis. The result of this study showed that 'role ambiguity' factor and 'role conflict' factor among the job stress factors influence on job involvement. Moreover, all factors(overload, role ambiguity, role conflict) among job stress influence on affective commitment.

• BMB Reports
• /
• v.54 no.9
• /
• pp.476-481
• /
• 2021

Liver receptor homolog-1 (LRH-1) has emerged as a regulator of hepatic glucose, bile acid, and mitochondrial metabolism. However, the functional mechanism underlying the effect of LRH-1 on lipid mobilization has not been addressed. This study investigated the regulatory function of LRH-1 in lipid metabolism in maintaining a normal liver physiological state during fasting. The Lrh-1^f/f and LRH-1 liver-specific knockout (Lrh-1^LKO) mice were either fed or fasted for 24 h, and the liver and serum were isolated. The livers were used for qPCR, western blot, and histological analysis. Primary hepatocytes were isolated for immunocytochemistry assessments of lipids. During fasting, the Lrh-1^LKO mice showed increased accumulation of triglycerides in the liver compared to that in Lrh-1^f/f mice. Interestingly, in the Lrh-1^LKO liver, decreases in perilipin 5 (PLIN5) expression and genes involved in β-oxidation were observed. In addition, the LRH-1 agonist dialauroylphosphatidylcholine also enhanced PLIN5 expression in human cultured HepG2 cells. To identify new target genes of LRH-1, these findings directed us to analyze the Plin5 promoter sequence, which revealed -1620/-1614 to be a putative binding site for LRH-1. This was confirmed by promoter activity and chromatin immunoprecipitation assays. Additionally, fasted Lrh-1^f/f primary hepatocytes showed increased co-localization of PLIN5 in lipid droplets (LDs) compared to that in fasted Lrh-1^LKO primary hepatocytes. Overall, these findings suggest that PLIN5 might be a novel target of LRH-1 to mobilize LDs, protect the liver from lipid overload, and manage the cellular needs during fasting.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.74-87
• /
• 2020

Overloaded trucks are the main source that threatens road safety and directly affects the reduction of pavement life. The On-board truck scale is the only equipment that could prevent overloading by measuring and adjusting the loading weight before driving. Legislation is needed to encourage its installation so that the driver can prevent overloading. In this study, an on-board truck scale system was installed on 30 dump trucks for transporting construction waste, such as soil and aggregates, which are major loads of 36.55% for overloading, and the trucks were monitored remotely. The overload prevention effect was analyzed by comparing driving data for 1 month before distribution of the weight display app that can recognize the weight to the driver and 1 month after distribution. After installation, overloading could be 6.1% reduced, and the transportation efficiency could be increased by checking the weight provided from the On-board truck scale system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.444-449
• /
• 2020

In this study, On-Board Truck Scale was installed on the construction waste collection / transportation vehicles to monitor the weight of the waste at all stages from generation to final treatment. It was performed as a case study of a construction waste control technology that can efficiently manage the total generating and recycling amount using real-time weight/location information obtained by the On-Board Truck Scale device. As a result of the study, it was confirmed that the total amount of construction waste can be monitored in real time, and a plan for efficient logistics transportation can be derived through the analysis of operation patterns by managing the real-time transport volume, transport distance, and transport time of the construction waste collection / transportation vehicles. It was confirmed that overloading can be prevented in advance by controlling the loading also.

• Information Systems Review
• /
• v.19 no.1
• /
• pp.49-74
• /
• 2017

The development of smart devices has affected employees' working environments and their lives. However, using smart devices is causing employees to experience technostress. This study aims to investigate the effects of technostress in using smart devices on usage intention in an organization. Moreover, the study investigates the effect of employees' stress-coping methods on the intention to use smart devices. This study posits familiarity, use innovativeness, role ambiguity, system vulnerability, technological limitation, and ubiquity as the antecedents of technostress. Data collected from 317 users who have experience in using smart devices in organizations are empirically tested against a research model using the PLS graph. Analysis results show that role ambiguity, system vulnerability, and technological limitation significantly influence technostress. Moreover, users take up emotion-focused coping behaviors because of technostress. Emotion-focused coping behaviors affect usage intention in organizations. However, technostress and problem-focused coping behaviors do not directly affect usage intention in organizations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.507-524
• /
• 2002

Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Toxicological Research
• /
• v.28 no.1
• /
• pp.39-49
• /
• 2012

We investigated the effect of zinc on the formation of colonic aberrant crypt foci induced by azoxymethane (AOM) followed by dextran sodium sulfate (DSS) in mice with high iron diet (HFe; 450 ppm iron). Sixweek old ICR mice were fed on high iron diets with combination of three different levels of zinc in diets, low-zinc (LZn; 0.01 ppm), medium-zinc (MZn; 0.1 ppm), and high-zinc (HZn; 1 ppm) for 12 weeks. Animals were received weekly intraperitoneal injections of AOM (10 mg/kg B.W. in saline) for 3 weeks followed by 2% DSS (molecular weight 36,000~50,000) in the drinking water for a week. To confirm the iron storage in the body, the hepatic iron concentration has been determine chemically and compared with histological assessment visualized by Prussian blue reaction. Aberrant crypt (AC) and aberrant crypt foci (ACF) were analyzed in the colonic mucosa of mouse fed high dietary iron. Superoxide dismutase (SOD) activity and thiobarbituric acid-reactive substances (TBARS) level were also investigated. Apoptosis in the preneoplastic lesion was determined by terminal deoxynucleotidyl transferase-mediated dUTP nickend labeling (TUNEL). In addition, immunohistochemistry of ${\beta}$-catenin was also performed on the mucous membrane of colon. The number of large ACF (${\geq}4$ AC/ACF), which possess greater tumorigenic potential, was significantly lower in MZn and HZn groups compared with LZn group. Cytosolic SOD activity in the liver was significantly higher in HZn group compared with LZn group. Hepatic MDA level was decreased significantly in HZn group compared with MZn and LZn groups. Apoptotic index was significantly higher in HZn group. Taken together, these findings indicate that dietary zinc might exert a protective effect against colonic preneoplastic lesion induced by AOM/DSS in ICR mice with high iron status, and suggest that dietary supplement of zinc might play a role in suppressing colon carcinogenesis in mice.

• The Journal of Korean Medicine
• /
• v.23 no.4
• /
• pp.161-168
• /
• 2002

Objectives: Hwangryunhaedok-tang (Huang-lian-jie-du-tang, HRHDT, 黃連解毒湯) is a traditional Korean herbal medicine that is formulated with Coptidis Rhizoma, Phellodendri Cortex, Scutellariae Radix and Gardeniae Fructus. HRHDT is cold (寒) and bitter (苦) in nature and has general properties of clearing heat and detoxifying (淸熱解毒), strengthening the stomach and settling the liver (健胃平肝), and reducing inflammation, fever and swelling. This formula can prevent and treat artherosclerosis, hyperplasia of the endothelium, cerebral fluid circulation, cerebral vascular deterioration through aging, impairment of neurotransmitters, or disruption of the functioning of the cerebral cortex following infection or trauma. The purpose of the study reported here was to determine the neuroprotective effect of HRHDT on global ischemia induced by 4-vessel occlusion in Wistar rats. Methods: HRHDT extract was lyophilized after extraction with 85% methanol and 100% water. Rats were induced to 10 minutes of forebrain ischemia by 4-vessel occlusion (4-VO) and reperfused again. HRHDT was administered with a dose of 100 mg/kg, and 500 mg/kg of 85% methanol extracts and 100 mg/kg of 100% water extracts, respectively, at 0 min and 90 min after 4-VO. Rats were killed at 7 days after ischemia and the number of CA1 pyramidal neurons was counted in hippocampal sections stained with cresyl violet. Results: Body temperature of animals showed no significant difference between saline-treated groups and HRHDT extracts-treated groups until 5 hours of reperfusion. This result indicated that neuroprotective effects of HRHDT extracts were not due to hypothermic effects. The administration of HRHDT showed a significant neuroprotective effect on hippocampal CA1 neurons at 7 days after ischemia compared to the saline-treated group (P<0.001). HRHDT methanol extracts of 100 mg/kg, 500 mg/kg and HRHDT water extracts of 100 mg/kg showed 88.5%, 98.3% and 95.1 % neuroprotection, respectively. Conclusions: The results of this study demonstrate that administration of HRHDT is highly effective in reducing neuronal damage in response to transient global cerebral ischemia. HRHDT may involve many mechanisms that might account for its high degree of efficacy. A number of factors including free radicals, glutamate, calcium overload, NO, and various cytokines have been proposed to have an important role in causing neuronal death after short periods of global ischemia. Further studies are needed to know the neuroprotective mechanisms of HRHDT.