• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3068-3078
• /
• 2015

Although the massive MIMO system supports a high throughput, it requires a lot of channel information for channel compensation. For the reduction of overhead, the massive MIMO system generally uses TDD as duplexing scheme. Therefore, the massive MIMO system is sensitive to rapidly changing fast fading in according to time. For the improvement of reduced SINR by fast fading, the adaptive power control is proposed. Unlike the conventional scheme, the proposed scheme considers mobility of device for adaptive power control. The simulation of the proposed scheme is performed with consideration for mobility of device. The result of the simulation shows that the proposed scheme improves SINR. Since SINR is decreased in according to the number of device in the network by unit of cell, each base station can accommodate more devices by the proposed scheme. Also, because the massive MIMO system with high SINR can use high order modulation scheme, it can support higher throughput.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.143-146
• /
• 1987

Fiber optics provide a solution to the problems at interference, capacity and reliability in communication. Approximately 20 kilometera of a six-fiber, multimode, longwave($1.3{\mu}m$), graded index silica glass fiber optic cable was helically wrapped around a phase conductor at a Korea Electric Power Corporation(KEPCO) 154KV transmission line. This paper presents an economic comparison of several fiber optic cable installation alternative and discusses the characteristics at the helically wrapped fiber cable, as well as the entire installation, including high voltage phase-to-ground (PTG) end termination, and splicing. The fiber link was installed for the field trial and practical use with overhead composite optical fiber cable which installation performed a few years earlier some other location and is intended to accommodate not only telephone but also supervisory Control and Data Acquisition(SCADA), protective relaying, and telemetry functions.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2224-2229
• /
• 2008

High-Speed train has been developed and it becomes faster and environmental friendly. As trains run faster, Noise of trains is generated mainly by aerodynamic disturbance. Pantograph, both ends of trains, and gaps of coaches which are thought to be aerodynamic noise's factors are primarily studied. Pantograph is a similarly shaped metal framework on the roof of an electric high speed train, transmitting current from an overhead electric catenary wire. Panhead which contacts electric wires directly looks like a bluff strut, goes through flows, is sensitive to external disturbances and is one of the most important factors which decide whole vehicles' driving ability. In this study, aerodynamically robust optimized pantograph panhead shape is designed and then evaluated through subsonic wind tunnel test. To compare these with existing panhead rectangular shapes or circular cylinder shapes, By visualizing strong vortex flow patterns which are main noise sources, characteristics are compared and analyzed

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.73-82
• /
• 2005

Test data volume and power consumption for scan vectors are two major problems in system-on-a-chip testing. Therefore, this paper proposes a new test data compression/decompression method for low power testing. The method is based on analyzing the factors that influence test parameters: compression ratio, power reduction and hardware overhead. To improve the compression ratio and the power reduction ratio, the proposed method is based on Modified Statistical Coding (MSC), Input Reduction (IR) scheme and the algorithms of reordering scan flip-flops and reordering test pattern sequence in a preprocessing step. Unlike previous approaches using the CSR architecture, the proposed method is to compress original test data, not $T_{diff}$, and decompress the compressed test data without the CSR architecture. Therefore, the proposed method leads to better compression ratio with lower hardware overhead and lower power consumption than previous works. An experimental comparison on ISCAS '89 benchmark circuits validates the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1947-1954
• /
• 2009

Service discovery mechanism is a core technique for getting a desired service in MANET(Mobile Ad-Hoc NETwork) environment. However, As feature of MANET, existing mechanisms have some problem that service requester search for trustable service. also it can not support scalability. in this paper, how to reliably support applications such as service discovery on top of MANET. we are firstly finding a trustable service provider and configure DHT(Distributed Hash Table). P2P's DHT can be adopted to service discovery mechanism because P2P and MANET share certain similarities, primarily the fact that both are instances of self-organizing decentralized systems. Especially, Proposed DHT systems used for P2P overlay network can be effective in reducing the communication overhead in service discovery. So proposed mechanism can support for reliably searching required service and scalability. Simulation results show that our mechanism is scalable and outperforms existing service discovery mechanism.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3728-3752
• /
• 2016

Wireless mesh networks (WMNs) have been increasingly applied in private and public networks during the last decade. In a different context, voice over IP (VoIP) has emerged as a new technology for making voice calls around the world over IP networks and is replacing traditional telecommunication systems. The popularity of the two technologies motivated the deployment of VoIP over WMNs. However, VoIP over WMNs suffers from inefficient bandwidth utilization because of two reasons: i) attaching 40-byte RTP/UDP/IP header to a small VoIP payload (e.g., 10 bytes) and ii) 841 μs delay overhead of each packet in WMNs. Among several solutions, VoIP packet multiplexing is the most prominent one. This technique combines several VoIP packets in one header. In this study, we will survey all the VoIP multiplexing methods over WMNs. This study provides a clear understanding of the VoIP bandwidth utilization problem over WMNs, discusses the general approaches in which packet multiplexing methods could be performed, provides a detailed study of present multiplexing techniques, shows the aspects that hinder the VoIP multiplexing methods, discusses the factors affected by VoIP multiplexing schemes, shows the merits and demerits of different multiplexing approaches, provides guidelines for designing a new improved multiplexing technique, and provides directions for future research. This study contributes by providing guidance for designing a suitable and robust method to multiplex VoIP packets over WMNs.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.473-480
• /
• 2002

Although many researches on IDS (Intrusion Detection System) have been performed, the most of them are limited to the algorithm of detection software. However, even an IDS with superior algorithm can not detect intrusion, if it loses packets which nay have a clue of intrusions. In this paper, we suggest an efficient wav to improve the performance of IDS by reducing packet losses occurred due to hardware limitation and abundant processing overhead introduced by massive detection software itself. The reduction in packet losses is achieved by dropping hacking-free packets. The result shows that this decrease of packet losses leads an IDS to improve the detection rate of real attack.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1685-1695
• /
• 2010

In this paper, we propose a new reliable multicast MAC protocol over the IEEE 802.11-based tactical ad hoc networks. The major contribution compared to the previous reliable multicast schemes using consecutive CTSs/ACKs is that the proposed scheme can send multiple CTS/ACK messages concurrently assisted by MC-DS/CDMA mechanisms. When multiple receivers receive the RTS/DATA message from a sender, they respond with the CTS/ACK message spread with pre-assigned code in the same time interval. The proposed scheme can reduce the overhead of multiple CTSs/ACKs. It is also possible to alleviate the received signal strength at the enemy detector and thus it improves low probability of detection performance. Through simulations and analysis, the proposed scheme outperforms that of the multiple CTSs/ACks in terms of the throughput, transmission delay and low probability of detection.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.67-74
• /
• 2008

This paper proposes, designs and implements an architecture of a server involved with the network camera based video surveillance systems to solve common problems including lack of inter-network operability at the video information sharing, drawback of bandwidth and processing-overhead caused by increase of the number of users, and difficulty of continuous monitoring over changes of network configurations. The proposed saver was designed to manage and service numerous network cameras and users as well as solving the existing problems by providing video distribution facility. Through the empirical study after applying the implemented server to a real video surveillance system we proved that the server can provide reasonable service quality while it processes several hundreds of simultaneous user connections under persisting more than one hundred connections to network cameras. We expect the developed video distribution server to enhance service quality of the large scale video surveillance systems for citizen-wide services such as traffic reporting informatics or natural calamities supporting.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2011

Wireless mesh network technology with transmission speeds similar to wired and wireless technology means to build, compared with wired networks, building a more efficient network to provide convenience and flexibility. The wireless mesh network router nodes in the energy impact of the mobility is less constrained and has fewer features entail. However, the characteristics of various kinds due to network configuration settings and the choice of multiple paths that can occur when the system overhead and there are many details that must be considered. Therefore, according to the characteristics of these network routing technology that is reflected in the design and optimization of the network is worth noting. In this paper, a multi-path setting can be raised in order to respond effectively to the problem of the router node data loss and bandwidth according to traffic conditions and links to elements of the hop count evaluation by using a genetic algorithm as a workaround for dynamic routing the routing metric for wireless mesh network scheme is proposed.