• Environmental Engineering Research
• /
• 제18권2호
• /
• pp.71-75
• /
• 2013

This study is to evaluate the effects of the separation wall on the sediment quality and quantity in a combined sewer, by surveying the sewer overflow and sediments during a rainfall. Since the separation wall installed in the combined sewer separates the rainfall and the sewage, the flow rate of the sewage is increased, and the amount of the sediment deposited on the sewer is decreased. One sampling point was the outfall of Daesacheon with a separation wall, and the other was the outfall of Gwaryecheon without a separation wall, in Daejeon metropolitan city. The maximum control of the biochemical oxygen demand (BOD) overflow load was more than 38% in the Daesacheon point with the separation wall, during a rainfall of 0.11 mm/hr. The maximum control of the BOD overflow load was 24% in Gwaryecheon without a separation wall, during a rainfall of 1.0 mm/hr. According to the survey results of the sediment in the sewer, the discharged sediment deposited on the sewer in Gwaryecheon point was about 23% to 28% of the total suspended solid during the rainfall. In addition, the average velocity of sewage in the presence of sediment was about 0.30 m/s, and if the separation wall is installed, it was expected to be about 1.01 m/s, that is 3.4 times more than the same conditions, resulting in the reduction of the sediment deposit.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.209-221
• /
• 2002

본 논문에서는 파랑에너지를 이용하여 항외의 해수를 항내로 유도하여 항내의 해수순환을 향상시키는 방법에 대하여 검토하였다. 파랑에너지를 활용하여 항내의 해수순환을 도모하기 위한 해안구조물로서는 월류제를 채택하여 제주외항에 적용하고 그 효과를 확률적인 관점에서 정량적으로 평가하였다. 월류제를 통한 해수유입량은 파고와 조위에 의하여 결정되는 것으로 가정하였으며 해수유입율과 파고 및 조위간의 함수관계는 수리모형실험 결과로부터 구하였다. 파랑수치모형의 후산자료와 검조소의 조위관측자료로부터 계산된 파고와 조위의 확률분포로부터 월류제를 통한 해수유입량의 확률분포를 구하는 방법을 제시하여 제주 외항에 적용한 결과 월류제를 통한 유량의 확률분포는 Gamma 함수에 근접하는 것으로 나타났으며 월류제의 최적위치에 대해서도 논의하였다. 그리고 월류제의 유무에 따른 항내오염확산을 계산하여 월류제에 의한 항내수질정화효과를 평가하였다.

• 정보처리학회논문지C
• /
• 제14C권3호
• /
• pp.285-292
• /
• 2007

적응형 대역폭 할당 방법에서는 가변 비트율로 저장된 비디오 데이터에 대한 전송 계획을 세우고 네트워크 트래픽을 고려하여 전송하는데, 전송 계획으로 CBA 알고리즘이 사용된다 그러나, CBA 알고리즘에서는 전송률 증가 구간의 크기가 감소 구간의 크기보다 일반적으로 크며, 전송률이 증가될 때에 오버플로우 경계선에서 전송률이 변화되므로 가용 전송률이 작은 경우에는 폐기되는 프레임의 양이 많아지게 된다. 본 논문에서는 이를 개선하기 위하여 언더플로우 경계선과 오버플로우 경계선의 중간에서 전송률이 변화되지만, 전송률의 증가가 필요한 경우에는 증가 양을 최소로 하는 스무딩 알고리즘을 제안한다. 제안 알고리즘과 CBA 알고리즘을 적응형 대역폭 할당 방법의 전송 계획으로 사용하였을 때, 최소 재생률, 평균 재생률, 재생률 변화량, 그리고 폐기되는 프레임 양을 비교하여 제안 알고리즘의 성능이 우수함을 보였다.

• 한국통신학회논문지
• /
• 제25권4A호
• /
• pp.489-495
• /
• 2000

In this paper we propose an approximate method to estimate the cell loss probability(CLP) due to buffer overflow in ATM networks. The main idea is to relate the buffer capacity with the CLP target in explicit formula by using the approximate upper bound for the tail distribution of a queue. The significance of the proposition lies in the fact that we can obtain the expected CLP by using only the source traffic data represented by mean rate and its variance. To that purpose we consider the problem of estimating the cell loss measures form the statistical viewpoint such that the probability of cell loss due to buffer overflow does not exceed a target value. In obtaining the exact solution we use a typical matrix analytic method for GI/D/1B queue where B is the queue size. Finally, in order to investigate the accuracy of the result, we present both the approximate and exact results of the numerical computation and give some discussion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.23-27
• /
• 2006

본 연구에서는 소형 액체 추력기 제작 공정 중 하나인 브레이징 부품 접합에서 발생한 Failure 사례에 대한 분석을 위해 가능 원인을 도출하고 이에 대한 검증을 위한 Sample Test를 수행하였다. Brazing Material, 부품 가공성 등에서 도출된 요인들이 Overflow 현상에 미치는 영향을 분석하여 실제 발생 원인을 파악하였으며, 이를 통해 원활한 공정 진행을 도모할 수 있었다.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.46-53
• /
• 2016

Effect of heating rate on microstructure of brazed joints with STS 304 Printed Circuit Heat Exchanger (PCHE),which was manufactured as large-scale($1170(L){\times}520(W)){\times}100(T)$, mm), have been studied to compare bonding phenomenon. The specimens using MBF 20 was bonded at $1080^{\circ}C$ for 1hr with $0.38^{\circ}C/min$ and $20^{\circ}C/min$ heating rate, respectively. In case of a heating rate of $20^{\circ}C/min$, overflow of filler metal was observed at the edge of a brazed joints showing the height of filler metal was decreased from $100{\mu}m$ to $68{\mu}m$. At the center of the joints, CrB and high Ni contents of ${\gamma}$-Ni was existed. For the joints brazed at a heating rate of $0.38^{\circ}C/min$, the height of filler was decreased from $100{\mu}m$ to $86{\mu}m$ showing the overflow of filler was not appeared. At the center of the joints, only ${\gamma}$-Ni was detected gradating the Ni contents from center. This phenomenon was driven from a diffusion amount of Boron in filler metal. With a fast heating rate $20^{\circ}C/min$, diffusion amount of B was so small that liquid state of filler metal and base metal were reacted. But, for a slow heating rate $0.38^{\circ}C/min$, solid state of filler metal due to low diffusion amount of B reacted with base metal as a solid diffusion bonding.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.1-13
• /
• 2015

Post-Katrina investigations revealed that most earthen levee damage occurred on the levee crest and landward-side slope as a result of either wave overtopping, storm surge overflow, or a combination of both. In this paper, combined wave overtopping and storm surge overflow of a levee embankment strengthened with high performance turf reinforcement mat (HPTRM) system was studied in a purely Lagrangian and meshless approach, two-dimensional smoothed particle hydrodynamics (SPH) model. After the SPH model is calibrated with full-scale overtopping test results, the overtopping discharge, flow thickness, flow velocity, average overtopping velocity, shear stress, and soil erosion rate are calculated. New equations are developed for average overtopping discharge. The shear stresses on landward-side slope are calculated and the characteristics of soil loss are given. Equations are also provided to estimate soil loss rate. The range of the application of these equations is discussed.

• Journal of Biosystems Engineering
• /
• 제23권4호
• /
• pp.365-372
• /
• 1998

This study was carried out to develop a nutrient-solution mixing-and-supplying system, which used a low-cost metering device instead of expensive metering pumps and a fuzzy logic controller. A low cost and precise overflow-type metering device was developed and evaluated by testing the flow discharge for the automatic nutrient-solution mixing-and-supplying system for snail-scale hydroponic sewers. The fuzzy logic controllers, which could predict and meet the desired values of EC and supply rate of nutrient solution were developed and verified by simulation and experiment. this fuzzy logic controller, whose algorithm consists of four crisp inputs, two crisp outputs and nine rules, was developed to predict the desired value of EC and supply rate of nutrient solution and two crisp inputs, one crisp output and nine rules used to control EC to the desired values. The nutrient-solution mixing-and-supplying system showed satisfactory EC control performance with the maximum overshooting of 0.035 mS/cm and the maximum settling time of 15 minutes in case of increasing 0.7 mS/cm. also, the accuracy of the overflow-type metering device in terms of the full-scale error was 2.29% when using solenoid valve only and 0.2% when using solenoid valve and flow control valve together.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권11호
• /
• pp.5271-5289
• /
• 2016

On large-scale data analysis platforms deployed on cloud infrastructures over the Internet, the instability of the data transfer time and the dynamics of the processing rate require a more sophisticated data distribution scheme which maximizes parallel efficiency by achieving the balanced load among participated computing elements and by eliminating the idle time of each computing element. In particular, under the constraints that have the real-time and limited data buffer (in-memory storage) are given, it needs more controllable mechanism to prevent both the overflow and the underflow of the finite buffer. In this paper, we propose an auto regulated data provisioning model based on receiver-driven data pull model. On this model, we provide a synchronized data replenishment mechanism that implicitly avoids the data buffer overflow as well as explicitly regulates the data buffer underflow by adequately adjusting the buffer resilience. To estimate the optimal size of buffer resilience, we exploits an adaptive buffer resilience control scheme that minimizes both data buffer space and idle time of the processing elements based on directly measured sample path analysis. The simulation results show that the proposed scheme provides allowable approximation compared to the numerical results. Also, it is suitably efficient to apply for such a dynamic environment that cannot postulate the stochastic characteristic for the data transfer time, the data processing rate, or even an environment where the fluctuation of the both is presented.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.413-418
• /
• 2001

Emergency shut-on valve was developed to shut off natural gas at the front of a gas meter in the house. The shut-off flow rate and differential pressure of this valve was controlled by adjusting the distance between the spool and magnet. Also the spool shape was an important factor in the performance of this valve. The experimental and computational results will be useful for the design having better performance.