• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1785-1790
• /
• 2010

This study examined the overall measurement system for the power dispersed high speed railway with 400km/h of maximum test speed. The measuring system evaluating an efficiency, stability and reliability is important for developing the high speed railway. In order to organize the comprehensive measuring system, it is needed to determined the test item, a number of channel and the specifications of the measurement system. In this study, we made lists for the performance evaluation tests of the next generation high speed railway expected to be developed in the future, and prepared generalization channel sheets for the specification of the overall measurement system. In addition, the specifications for the measuring system were discussed and synthesized.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1118-1123
• /
• 2011

The introduction of high speed railway(KTX) in Korea after the Korean high speed train through the KTX-II of the development is being run is made. Thus the demand for the railway technology advances and high performance, Korean government promoted the development of the next-generation high speed train system(HEMU-400X). In addition to the production of train system essential element of the train through an on-line test is to evaluate the performance. Through the on-line test of the train in order to evaluate the performance test items should be selected first and need to the test procedures are required. In addition, an Overall Measuring System(OMS) to measure the performance of the train system should be established. In this study for the on-line test of the HEMU-400X test items was selected for detailed measurements and performance evaluation of a comprehensive and efficient trains to test an OMS for the development are discussed.

• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.484-488
• /
• 2011

해외 철도 선진국들은 고속열차의 독자적인 설계능력, 시험평가체계와 평가기술을 보유하고 있다. 국내에서도 열차의 성능을 평가하기 위한 선진화된 계측기술 및 시스템 개발이 필요하다. 본 연구는 400km/h급 동력분산식 차세대고속열차 개발의 중요한 요소인 차량시스템 및 부품의 성능과 안전성 및 신뢰성 검증을 종합적이고 효율적으로 평가하기 위한 종합계측시스템 개발에 대한 연구이다. 종합계측시스템은 차량계측장치, 팬터계측장치 및 영상장치 등으로 구성되며, 계측시험에 대한 총괄 모니터링을 위해 종합계측실을 구성하였다. 본 연구는 향후 열차의 성능평가기술 향상에 이바지 할 것으로 판단된다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.902-910
• /
• 2016

This paper presents the overall measurement system for on-line test of super-speed maglev train. The super-speed maglev train is composed of vehicle, propulsion, power, and so on. In order to evaluate and diagnose for sub-system, we made overall measurement system. Just like the other measurement system, it is designed to distributed type. The hardware is consist of SCXI, PXI, Terminal, UPS, and so forth. It is installed on a train, control room, power room and track to collect lots of signals. The software controls hardware system, monitors main data such as inverter current, converter voltage. Using the measurement system, we evaluated a lot of performances for vehicle, track, and so forth. Through the developed system have improved reliability and safety for super-speed maglev train.

• Journal of Radiation Protection and Research
• /
• 제36권3호
• /
• pp.107-118
• /
• 2011

Conventional (SRS) and fractionated (FSRS) stereotactic radiosurgery necessarily require stringent overall target point accuracy and precision. We determine three-dimensional intracranial target point deviations (TPDs) in a whole treatment procedure using magnetic resonance image (MRI)-based polymer-gel dosimetry, and suggest a technique for overall system tests. TPDs were measured using a custom-made head phantom and gel dosimetry. We calculated TPDs using a treatment planning system. Then, we compared TPDs using mid bi-plane and three-dimensional volume methods with spherical and elliptical targets to determine their inherent analysis errors; finally, we analyzed regional TPDs using the latter method. Average and maximum additive errors for ellipses were 0.62 and 0.69 mm, respectively. Total displacements were 0.92 ${\pm}$ 0.25 and 0.77 ${\pm}$ 0.15 mm for virtual SRS and FSRS, respectively. Average TPDtotal at peripheral regions was greater than that at central regions for both. Overall system accuracy was similar to that reported previously. Our technique could be used as an overall system accuracy test that considers the real radiation field shape.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.553-558
• /
• 1999

As a process of development of composite beam-column connection system, structural tests have been conducted to verify moment resisting performance of the system. The tests have been proceeded by two steps, the first being welding performance test of the steel connection rod and stiffners, and the second overall moment resisting capacity of the fuly assembled system. Ten welding test specimens and four prototype specimens have been used in the test. Good structural performance of welding test specimens has been observed without any single welding failure, and sufficient moment resisting capacity has been proved from the overall performance test, with the moment magnitude in excess of the calculated plastic moment.

• 한국통신학회논문지
• /
• 제30권4C호
• /
• pp.207-214
• /
• 2005

옥내 무선 통신에서 심한 각도 퍼짐으로 인해 생기는 옥내 페이딩 영향을 극복하기 위해 수신기에 다중 안테나를 사용한 단일입력 다중출력의 옥내 무선 시스템 구조를 생각한다. 옥내 무선 통신의 성능 향상 방법으로 평균 주사 벡터 개념을 제안하고, PC와 무선 통신시스템 알고리즘을 사용한 검증 시스템을 제작하고, 알고리즘 성능을 분석한다. 또한, 전체 옥내 무선 시스템에 대한 검증 시스템의 동작 순서와 구조도 알아보고, 성능 분석을 통해 구현된 각 알고리즘들의 수행시간을 알아본다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.55-59
• /
• 2004

This study developed a fully automated test system for pressure vessels, containing such as oxygen, nitrogen, which is widely used in many industries. The pressure vessel test has three major parts including weight measurement test, water-hydraulic test and leakage test followed by cleaning and drying. The control system for these tests consists of three parts: a PLC, a monitoring system and a database management system. The PLC oversees overall control of test machines, while the monitoring system measures and displays weight, pressure, flow etc. for every situations, and the database management system stores test data. These three modules are designed to communicate with one another at 1 Hz frequency alerting problematic situations to the operator. The system has gone through actual field tests for verification of performances.

• 한국추진공학회지
• /
• 제6권4호
• /
• pp.47-58
• /
• 2002

압력조절 레귤레이터는 KSR-III 추진제 탱크의 압력 조절용으로 개발하였다. KSR-III 가압 시스템은 가압 탱크, 압력조절용 레귤레이터, 추진제 탱크로 구성된 가장 기본적인 시스템이며 레귤레이터는 헬륨 탱크, 파이로밸브, 헬륨주입밸브와 더불어 가장 핵심적인 부품이다. 1차 시제품으로 기밀, 강도, 기본 성능을 만족하는 상세 설계를 완성하였고 2차 시제품으로 추진기관 종합수류시험을 수행하였다. 2차시험을 통해서 밸브의 용량(Cv)을 늘려야 할 필요성이 나타났다. 3차 시제품에 이를 개선하였으며 추진기관 종합 실추진제 시험과 연소시험을 통해 최종 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1118-1123
• /
• 2004

Launched in 1999 and funded by the Korean government, the R&D project of developing the. light train system technology is finally wrapped up to produce its prototype train prototype and all the research activities on signal, communication, power supply third rail Type and infra-structure have been completed. In an attempt to verify the usability of the system through an actual testing and as a preliminary step to the application of the system to overall light train construction projects to be implemented in different cities in Korea, testing lines are under construction now. Here we'd like to introduce people to the general overview of the test line construction and interface found in the process of project.