• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.9-17
• /
• 2013

In this paper, we propose a new multiplication algorithm for two polynomials using primitive polynomial with all 1 of coefficient on finite fields GF($2^m$), and design the multiplier with high-speed parallel input-output module structure using the presented multiplication algorithm. The proposed multiplier is designed $m^2$ same basic cells that have a 2-input XOR gate and a 2-input AND gate. Since the basic cell have no a latch circuit, the multiplicative circuit is very simple and is short the delay time $D_A+D_X$ per cell unit. The proposed multiplier is easy to extend the circuit with large m having regularity and modularity by cell array, and is suitable to the implementation of VLSI circuit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.7-12
• /
• 2008

In this paper, a highly efficiency power amplifier is presented for multi-band antenna system. The class F power amplifier operating in dual-band designed with one LDMOSFET. An operating frequency of power amplifier is 900 MHz and 2.14 GHz respectively Matching networks and harmonic control circuits of amplifier are designed by using the unit cell of composite right/left-handed(CRLH) transmission line(TL) realized with lumped elements. The CRLH TL can lead to metamaterial transmission line with the dual-band holing capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of all harmonic components for high efficiency is very difficult, we have controled only the second- and third-harmonics to obtain the high efficiency with the CRLH TL. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.924-927
• /
• 2017

This paper presents a 6~18 GHz 8-bit true time delay (TTD) circuit. The unit delay circuit is based on m-derived filter with relatively constant group delay. The designed 8-bit TTD is implemented with two single-pole double-throw (SPDT) switches and seven double- pole double-throw (DPDT) switches. The reflection characteristics are improved by using inductors. The designed 8-bit TTD was fabricated using $0.18{\mu}m$ CMOS. The measured delay control range was 250 ps with 1 ps of delay resolution. The measured RMS group delay error was less than 11 ps at 6~18 GHz. The measured input/output return losses are better than 10 dB. The chip consumes zero power at 1.8 V supply. The chip size is $2.36{\times}1.04mm^2$.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1257-1259
• /
• 1996

In this paper, we introduce an integrated communication and control system(ICCS) for control of a crane. The system is integrated with a compasite technique as a network interfacing, a user interfacing and a system control for continuous process like as a container crane. The field-bus(Profibus) network module is used to interconnect each input/output module with main control unit. The MMI system for user interfacing is integrated with an ODBC-based data management tool and IECl131-based control logic design tool(Soft-Logic Designer:SLD). The each programmed control task in the main Controller is executed using a petri-net based scheduler.

• Journal of Sensor Science and Technology
• /
• v.12 no.5
• /
• pp.205-210
• /
• 2003

To develop the highly sensitive Magneto-Impedance sensor, the amorphous ribbon was micro-processed to meander type sensor pattern, and its external magnetic field dependence of impedance was investigated. The impedance of the pattern had peak value at the magnetic field of 13 Oe and its changing ratio was about 170%. The impedance change per unit magnetic field was about 36% at bias field of 6 Oe, in which the output with high sensitivity and linearity could be obtained. The magnetic field resolution of the sensor module, which consist of the amorphous pattern and driving circuit, was about $10^{-3}$ Oe.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.20-28
• /
• 2002

This paper describes the time sharing type high frequency resonant inviter can be used as power of induction heating. This closed inverter can be obtained output frequency three times than switching frequency by composing three unit inviter of conventional Half-Bridge serial resonant inverter in parallel with input power source also, this reduce switching loss because it has ZVS function. The analysis of the proposed circuit is generally described by using the normailized proposed parameters. The principle of basic operating and the its charasteristics are extimated by the parameters such as switching frequency($\mu$), the variation of Phase angle($\phi$) of Phase-shift. Experimental results are presented to verify theoretical discussion. This preposed inverter will be able to be prastically used as a power supply in various fields as induction, heating application, DC-DC converter etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.439-446
• /
• 2011

In this paper, we proposed and implemented a dedicated hardware for Huffman coding which is a method of entropy coding to use compressing multimedia data with video coding. The proposed Huffman codec consists Huffman encoder and decoder. The Huffman encoder converts symbols to Huffman codes using look-up table. The Huffman code which has a variable length is packetized to a data format with 32 bits in data packeting block and then sequentially output in unit of a frame. The Huffman decoder converts serial bitstream to original symbols without buffering using FSM(finite state machine) which has a tree structure. The proposed hardware has a flexible operational property to program encoding and decoding hardware, so it can operate various Huffman coding. The implemented hardware was implemented in Cyclone III FPGA of Altera Inc., and it uses 3725 LUTs in the operational frequency of 365MHz

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.360-364
• /
• 2016

The rare earth output is concentrated in limited number of countries including China. Also the necessity for development of non-rare earth motor is getting signified due to the rapid increase of rare earth price and resource weaponizing policies. Non-rare earth motor is generally designed as spoke type PMSM (Permanent Magnet Synchronous Motor) in order to maximize the power density. Such spoke type PMSM has advantage in concentrating the flux but demonstrates lower efficiency compared to permanent magnet using Nd (Neodymium) permanent magnet. Therefore, applications with strong necessity for efficiency need rotor structure having improved efficiency compared to spoke type PMSM. Hence, this study suggested fan-shape type PMSM with somewhat lower power density but maximized efficiency. Fan-shape type PMSM is a rotor shape demonstrating outstanding reduction of iron loss compared to existing spoke type. Thus, this study analyzed the improvement of efficiency and reduction of loss arising from the suggested shape through parameter calculation.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.799-811
• /
• 2006

As an alternative measure to replace reactive stance with proactive one, a risk based management scheme has been commonly applied to enhance public satisfaction on water service by providing a higher creditable solution to handle a rehabilitation problem of pipe having high potential risk of leaks. This study intended to examine the feasibility of a simulation model to predict a recurrence probability of pipe leaks. As a branch of the data mining technique, probabilistic neural network (PNN) algorithm was applied to infer the extent of leaking recurrence probability of water network. PNN model could classify the leaking level of each unit segment of the pipe network. Pipe material, diameter, C value, road width, pressure, installation age as input variable and 5 classes by pipe leaking probability as output variable were built in PNN model. The study results indicated that it is important to pay higher attention to the pipe segment with the leak record. By increase the hydraulic pipe pressure to meet the required water demand from each node, simulation results indicated that about 6.9% of total number of pipe would additionally be classified into higher class of recurrence risk than present as the reference year. Consequently, it was convinced that the application of PNN model incorporated with a data base management system of pipe network to manage municipal water distribution network could make a promise to enhance the management efficiency by providing the essential knowledge for decision making rehabilitation of network.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.117-133
• /
• 2014

This thesis aims to investigate the morphologic relationship among the neckline, collar, and hair style, in which the width and height were measured by selecting the representative costumes from 16th to 19th centuries. The pieces of 170 pictures selected by fashion experts were cut in the same condition, with the part of the end of shoulder, head, and chest all placed on the equal level. The products were directly measured by a team of 3 specialists for verification of this study, of which results were calculated into average. The values of output were categorized into the unit of decade and finally into a graph of variation, in which the trend and relationship were evaluated according to the width and height. In 16th century, the width and height of the neckline were inversely proportional to those of hair style, while those of collar were proportional to those of hair style. In 17th century, the width and height of the hair style were proportional to those of neckline and collar. In 18th century, those of the neckline were inversely proportional to the hair style, with no collar found. In 19th century, the width of the neckline and collar were proportional to that of the hair style, while the height of the neckline and collar were inversely proportional to that of the hair style. The analysis of the morphologic relationship among neckline, collar, and hair style resulting from this study revealed that the change of the hair style took place corresponding to those of neckline and collar. Generally, the width of the hair style was found to be more resistant to change, compared to those of neckline and collar that were more susceptible. The height of the neckline was more resistant to change, compared to those of the hair style and collar presenting their frequently fluctuating height. Conclusively, the factor of height rather than that of width showed more dominant proportions, because the various forms of the collar and hair style evolved in terms of the height rather that width, relative to that of the neckline.