• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1221-1224
• /
• 1996

As in most industrial processes, the dynamic characteristics of an electric power system are subject to changes. Amongst those effects which cause the system to be uncertain, faults on transmission lines are considered. For the stabilization of the power system, we present an indirect adaptive control method, which is capable of tracking a sudden change in the effective reactance of a transmission line. As the plant dynamics are nonlinear, an input-output feedback linearization method is combined with an identification algorithm which estimates the effect of a fault.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.673-678
• /
• 2009

This paper presents a feedback method for improving the system capacity of MU-MIMO system for downlink channel environments. In a typical conventional feedback method, CVQ, in order to enhance the channel capacity, not only the feedback load is increased but also the quantization of the channel vector is increased, because the channel parameter of each user has to be fed back after quantizing one of the pre-defined N-codebook vectors. In this paper, a novel feedback method is proposed which provides an improved system capacity by transferring the channel state information without increasing the feedback load. Performance of the proposed method is compared to the conventional CVQ method through computer simulations. The simulation results show that the proposed method with 3-bit feedback provides a system capacity comparable to the CVQ method of 6-bit feedback when the number of transmit antennas is 2.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.271-274
• /
• 1995

This paper is concerned with the problem of robust stabilization of uncertain single-input and single-output nonlinear systems. Based on the input/output linearization approach for nonlinear state feedback synthesis in conjunction with Lyapunov methods, a stabilizing state feedback controller is proposed. Compared with the controllers reported in the control literature, instead of uniform ultimate boudedness, the controller proposed in this paper can guarantee uniform asymptotic stability of nonlinear systems in the presence of uncertainties. The required information about uncertain dynamics in the system is only that the uncertainties are bounded in Euclidean norm by known functions of the system state.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.864-869
• /
• 2004

A novel concept of feedback loop design for modal test and model updating is proposed. This method uses the closed -loop natural frequency information for parameter modification to overcome the problems associated with the conventional method employing the modal sensitivity matrix. To obtain new modal information from closed-loop system, controllers should be effective in changing modal data while guaranteeing the stability of closed-loop system. It is very hard to guarantee the stability of the closed-loop system with non-collocated sensor and actuator set. Ill this research, we proposed a controller called mode-decoupling controller that can change a target mode as much as the designer wants guaranteeing the stability of closed-loop system. This controller can be computed just using measured open-loop modeshape matrix. A simulation based on time domain input/output data is performed to check the feasibility of proposed control method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.955-961
• /
• 2004

A novel concept of feedback loop design for modal test and model updating is proposed. This method uses the closed-loop natural frequency information for parameter modification to overcome the problems associated with the conventional method employing the modal sensitivity matrix. To obtain new modal information from closed-loop system, controllers should be effective in changing modal data while guaranteeing the stability of closed-loop system. But it is very hard to guarantee the stability of the closed-loop system with non-collocated sensor and actuator set. In this research, we proposed a controller called mode-decoupling controller that can change a target mode as much as the designer wants guaranteeing the stability of closed-loop system. This controller can be computed Just using measured open-loop modeshape matrix. A simulation based on time domain input/output data is performed to check the feasibility of proposed control method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.464-469
• /
• 2009

This paper discusses a robust observer-based output-feedback stabilization of an uncertain Takagi-Sugeno (T-S) fuzzy system in a network. In the networked control system, the input delay occurs inevitably and it is expressed by the Markovian stochastic process. To design robust sampled-data observer-based output-feedback controller, we discretize the T-S fuzzy system and represent as a jump system. Stochastic robust stabilization condition is formulated in terms of linear matrix inequalities.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2187-2195
• /
• 2018

In order to realize the multi-objective control of single-input multi-output nonlinear differential algebraic system (NDAS) and to improve the dynamic characteristics and static accuracy, a design method of nonlinear control with multi-objective feedback (NCMOF) is proposed, the principium of this method to arrange system poles, as well as its nature to coordinate dynamic characteristics and static accuracy of the system are analyzed in detail. Through NCMOF design method, the multi-objective control of the system is transformed into linear space, and then it is effectively controlled under the nonlinear feedback control law, the problem to balance all control objectives caused by less input and more output of the system thus is solved. Applying NCMOF design method to generator excitation system, the nonlinear excitation control law with terminal voltage, active power and rotor speed as objective outputs is designed. Simulation results show that NCMOF can not only improve the dynamic characteristics of generator, but also damp the mechanical oscillation of a generator in transient process. Moreover, NCMOF can control the terminal voltage of the generator to the setting value with no static error under typical disturbances.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.183-191
• /
• 2003

In this paper, the interference cancellation system, which is used to cancel the feedback signal In the wireless communication system with the same frequency, is studied. The time-varying feedback signal generated from transmitter antenna to receiver antenna reduces the performance of the receiver system. The interference cancellation system using adaptive feedback method(AF-ICS) is suggested to prevent the oscillation of the receiver system and maintain the maximum output power of the power amplifier by the reduction of time-varying feedback signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.332-337
• /
• 1988

A digital series-feedback compensator algorithm for tracking time-varying signal is presented. The series-feedback compensator is composed of one closed loop pole / zero cancellation compensator and one desired-input generator. This algorithm is applied to nonlinear hydraulic position control system. The hydraulic servo system is modelled as a second order linear model and cancellation compensator is modelled from it. The desired input generator is inserted to reduce modelling error. Digital computer simulation output using this control method is present and the usefulness of this control algorithm for nonlinear hydraulic system is verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.805-815
• /
• 1992

In this paper, robust decoupling control scheme of miftivarlable systems Is studied. Design methods for Input-Output decoupling systems with robustness against signal failure In arbitrary feedback loop or actuator loop Is suggested based on the Riccati type matrix equation and state feedback, and is simulated In Turbo-Generator systems with B-Input, 2 output. The results of simulation represents the decoupled and stable response against the failure of signal In sensor or actuator loop. However, the system designed by conventional ,it ate feedback shows the unstable response. This method Is applied for robust decoupling control of the complicated multivariable systems.