• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.646-649
• /
• 2014

Performances of spectrum-sliced channels are strongly affected by their relative intensity noise (RIN). We use polarization-independent optical modulators (PIOMs) for spectrum-sliced channels to suppress their RIN. The PIOM driven by a high sinusoidal voltage signal evenly redistributes optical frequency components in the spectral domain and reduces the RIN. It can be used at a broadband light source (BLS) output to produce spectrum-sliced channels having lower RIN values. Also, it can be used for each spectrum-sliced channel within each optical network unit (ONU). In our experiment, where 12.5-GHz-spaced spectrum-sliced channels are used in 1-GbE speed, the use of PIOM at the BLS output reduces the bit error rate (BER) of the spectrum-sliced channel by more than an order of magnitude. The use of PIOM within the ONU reduces the BER by approximately 3 orders of magnitude.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1819-1830
• /
• 1991

본 연구에서는 구조물이 순수한 선형계인 경우에 국한하여 선형 구조물의 여 러지점에서 측정한 신호들을 기존의 방법과 같이 다중입력으로 간주하고 선형 구조물 로부터 방사된 소음, 즉 관측자의 위치에서 측정한 신호를 출력으로 가정한 두 부분 기여도 함수를 적용하여 소음/진동원을 규명하였을 때 발생하는 결과를 이론적으로 해 석하여 보았다.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.193-198
• /
• 2009

Recently, characteristic research by the changes in the spectrum, one of the factors that influence analysis of maximum output power of PV module, has been studied. In this paper, a one-day intensity of solar irradiation, change of spectrums with time and electrical output for spectrums are analyzed. As a result, blue-rich wavelength compared with red-rich wavelength has large variation of solar irradiance with time, so we recognized that change of solar irradiance is dominated by variation of blue~rich wavelength. Also in same intensity of solar irradiance, electrical output in blue-rich wavelength was 3-8 % higher than one in red-rich wavelength.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권6호
• /
• pp.404-409
• /
• 2014

This paper presents a Spread Spectrum Clock Generator (SSCG) based on Relaxation oscillator using Up/Down Counter. The current is controlled by a counter and the spread spectrum of the Relaxation Oscillator. A Relaxation Oscillator with temperature compensation using the BGR and ADC is presented. The current to determine the frequency of the Relaxation Oscillator can be controlled. The output frequency of the temperature can be compensated by adjusting the current according to the temperature using the code that is the output from the ADC and BGR. EMI Reduction of SSCG is 11 dB, and Spread down frequency is 150 kHz. The current consumption is $600{\mu}A$ from 5V and the operating frequency is from 2.3 MHz to 5.75 MHz. The rate of change of the output frequency with temperature was approximately ${\pm}1%$. The SSCG is fabricated in a 0.35um CMOS process with active area $250um{\times}440um$.

• 한국소음진동공학회논문집
• /
• 제17권11호
• /
• pp.1056-1063
• /
• 2007

Recently, there has been a growing consumer interest in the amount of noise produced by household electrical appliances. The designer of the product must identify the source of the noise, in order to reduce the noise. In the case of a household electric appliance such as the washing machine, there is consumer's complaint about the noise that is generated during the dehydrating condition. Because of several noise sources combined each other. It is difficult to identify the noise sources that contribute to the noise output. Multi-Dimensional Spectral Analysis (MDSA) is a method that can remove the correlation between different noise sources, and it expresses the key contributing factor as a unique output. This study utilized MDSA to analyze the contribution of each input in the noise output during the dehydrating condition.

• 정보통신설비학회논문지
• /
• 제2권4호
• /
• pp.42-51
• /
• 2003

본 논문에서는 무선 LAM 시스템에서 전력증폭기의 위상왜곡에 따른 출력 스펙트럼의 관계에 대해 분석하고자 하였으며, 이를 위해 전력증폭기의 ACPR. 특성과 OFDM방식의 고려사항을 고찰하였다. 또한, OFDM 변조방식과 전력증폭기의 비선형성과의 관계를 알기위해 최대. 54Mbps의 전송속도를 갖는 IEEE 802.11a 규격의 OFDM 변조부와 송신부를 시뮬레이션하였다. 전력증폭기의 비선형 특성은 AM-to-AM과 AM-to-PM으로 모델링 하였으며, 구성된 입력 신호원을 전력증폭기에 인가하여 위상왜곡에 따른 출력 스펙트럼 특성을 분석하였다. 출력 스펙트럼 분석결과 위상왜곡이 증가할수록 전력 증폭기의 AM-to-PM 특성이 $5^{\circ}$일 때 P1dB에서의 출력 스펙트럼은 요구 스펙트럼을 만족하였지만, $10^{\circ}$에서부터 $20^{\circ}$까지의 위상왜곡에서는 요구 스펙트럼을 만족하지 못함을 확인할 수 있었다. 또한, 전력증폭기의 비선형 특성으로 인해 생성되는 주파수 재성장으로 인한 전력증폭기의 출력 스펙트럼은 P1dB에서 만족하지 않는다. 따라서, AM-to-PM 왜곡 정도에 따라 back-off값이 요구되며, OFDM을 이용한 변조부의 경우 더 적은 back-off값이 요구됨을 알 수 있었다.

• 한국음향학회지
• /
• 제14권5호
• /
• pp.51-57
• /
• 1995

본 논문에서는 청각 모델을 기초로 잡음에 강한 음성 특징 추출을 연구하였다. 청각모델은 basilar membrane 모델, 섬모세포(hair cell) 모델과 스펙트럼 출력단으로 구성하였다. Basilar membrane 모델은 음파의 진동에 따른 전달 특성을 묘사한 것으로 대역 통과 필터의 열로 나타난다. 섬모 세포 모델은 basilar membrane의 진동에 의한 신경 물질로의 변환을 나타낸다. 이것은 입력의 상대적인 값에 크게 반응하는 adaptation 기능을 이용하게 되며, 잡음 제거에 중요한 역할을 하게 된다. 스펙트럼 출력 단은 각 채널의 평균 firing rate를 이용하여 mean rate spectrum을 형성한다. 그리고 mean rate spectrum을 이용하여 특징 벡터를 추출하였다. 실험 결과는 청각 구조에 기초한 특징 추출이 다른 특징 추출 방법에 비해 잡음에서 더 향상된 성능을 가짐을 보였다.

• ETRI Journal
• /
• 제43권5호
• /
• pp.941-949
• /
• 2021

In this study, a spatial spectrum method is proposed to cope with the pilot spoofing attack (PSA) problem by exploiting the of uplink-downlink channel reciprocity in time-division-duplex multiple-input multiple-output systems. First, the spoofing attack in the uplink stage is detected by a threshold derived from the predefined false alarm based on the estimated spatial spectrum. When the PSA occurs, the transmitter (That is Alice) can detect either one or two spatial spectrum peaks. Then, the legitimate user (That is Bob) and Eve are recognized in the downlink stage via the channel reciprocity property based on the difference between the spatial spectra if PSA occurs. This way, the presence of Eve and the direction of arrival of Eve and Bob can be identified at the transmitter end. Because noise is suppressed by a spatial spectrum, the detection performance is reliable even for low signal-noise ratios and a short training length. Consequently, Bob can use beamforming to transmit secure information during the data transmission stage. Theoretical analysis and numerical simulations are performed to evaluate the performance of the proposed scheme compared with conventional methods.

• Current Optics and Photonics
• /
• 제7권1호
• /
• pp.47-53
• /
• 2023

We propose a centralized passive-optical-network monitoring scheme using the resonance-spectrum properties of a Fabry-Perot cavity based on fiber Bragg gratings. Each cavity consists of two identical uniform fiber Bragg gratings and a varying cavity length or grating length, which can produce a unique single-mode resonance spectrum for the drop-fiber link. The output spectral properties of each cavity can be easily adjusted by the cavity length or the grating length. The resonance spectrum for each cavity is calculated by the transfer-matrix method. To obtain the peak wavelength of the resonance spectrum more accurately, the effective cavity length is introduced. Each drop fiber with a specific resonance spectrum distinguishes between the peak wavelength or linewidth. We also investigate parameters such as reflectivity and bandwidth, which determine the basic performance of the fiber Bragg grating used, and thus the output-spectrum properties of the Fabry-Perot cavity. The feasibility of the proposed scheme is verified using the Optisystem software for a simplified 1 × 8 passive optical network. The proposed scheme provides a simple, effective solution for passive-optical-network monitoring, especially for a high-density network with small end-user distance difference.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.741-746
• /
• 2007

In this study, transfer path identification and output estimation are simulated by multi-dimension spectral analysis method (MDSA). Multi -input/single-output system give expression the vehicle suspension which each inputs are correlated reciprocally. In case of correlating with inputs, the system needs separating the each input signal by MDSA. Main simulations are about finding effective input by coherent output spectrum and selecting optimal input's number by multiple coherence function. Also, by shielding transfer path of each input, transfer path characteristic is identified in terms of overall integrated contribution level.