• 복식문화연구
• /
• 제26권4호
• /
• pp.503-518
• /
• 2018

The purpose of this study is to illustrate the design of safety suits based on energy-harvesting technology, particularly targeting street cleaners who must work at night with high mobility. The design focuses on applying lightweight energy-harvesting tools and illuminant into the wear. The design development reflects feedback from testers collected via survey constituting a key methodology. The development process has two main stages. Each stage uses a process of design prototyping, internal examination, test sampling, test wearing, and wearers' feedback via survey that consists of questions on visibility, wearing convenience, and washability. The first stage results show the design of safety suits with energy-harvested LED illuminant inserted and the survey results collected from street cleaners dressed in 4 sample and 80 actual suits in total. Improved based on the first-stage survey results, the second stage designs the suits with detachable energy-harvested EL tape. From these 5 sample and 30 actual second-stage suits, the additional survey indicates that this second-stage design facilitates more visibility and convenience in washing and wearing than the first-stage design. Accordingly, one can expect that this new design can apply not only to safety suits for night workers but also to handicapped or outdoor sportswear applications in the future.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.132-136
• /
• 2014

Recently supporting policy of government for agricultural is changing from individual to workplace. For this reason, the number of industrial injury is increasing due to increase workplace in the agriculture. However, because the studies on the characteristics and causes of injury have not been performed, the effective measure for the prevention of industrial injury is difficult to establish. The aim of this study is to analyze the industrial injury characteristic and prepare the effective counterplan to prevent industrial injury of the workplace in the agriculture. This study analyzed 2,970 cases of industrial injury during the last five years (2008-2012) in the agriculture sector. The data was offered by Korean Occupational Safety and Health Agency. The results of analysis the industrial injury characteristic of the workplace in the agriculture, number of industrial injury for source of industrial injury was 12.3% in the outdoor floor and injury type was 23.1% in the fall. This study analyzed industrial injury characteristic which size and type of workplace, injury type and source of industrial injury through the case of industrial injury in agriculture. The result of this study will be helpful to identify the industrial injury characteristic in the agriculture and prepares the effective industrial injury prevention method.

• 한국방사선학회논문지
• /
• 제13권4호
• /
• pp.565-572
• /
• 2019

본 연구에서는 야외 방사선투과검사 시 방사선작업종사자의 맞춤형 차폐체 제작을 위해 3D 프린터 필라멘트의 재질 및 두께에 대한 차폐 분석을 수행하였다. MCNPX를 이용한 모의 모사를 통해 복셀 선원 $^{192}Ir$, $^{75}Se$를 선택 후 ICRU Slab Phantom에 차폐체를 부착하고, 선원과 Slab Phantom의 거리를 100 cm으로 설정하였다. 12 개의 차폐물질에 대하여 차폐물질이 없는 경우부터 200 mm 까지 5 mm 단위로 나누어 각 차폐물질별 단위 질량 당 흡수되는 에너지를 평가하였다. 그 결과 모든 방사선투과검사용 감마선원에서 ABS + Tungsten, ABS + Bismuth, PLA + Copper, PLA + Iron 순으로 차폐 효과가 높은 것으로 나타났다. 그러나 납에 비해서는 다소 낮은 차폐 효과를 보였다. 향후 본 연구를 토대로 원자번호와 밀도가 높은 필라멘트 재료에 대한 추가적인 연구가 필요할 것으로 판단된다.

• 한국산업보건학회지
• /
• 제25권2호
• /
• pp.202-210
• /
• 2015

Objectives: The purpose of this study was to examine clean room(C/R) structure, air conditioning and contamination control systems and to provide basic information for identifying a correlation between the semiconductor work environment and workers' disease. Methods: This study was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. The C/R structure and air conditioning method were investigated using basic engineering data from documentation for C/R construction. Furthermore, contamination parameters such as airborne particles, temperature, humidity, acids, ammonia, organic compounds, and vibration in the C/R were based on the International Technology Roadmap for Semiconductors(ITRS). The properties of contamination control systems and the current status of monitoring of various contaminants in the C/R were investigated. Results: 200 mm and 300 mm wafer fabrication facilities were divided into fab(C/R) and sub fab(Plenum), and fab, clean sub fab and facility sub fab, respectively. Fresh air(FA) is supplied in the plenum or clean sub fab by the outdoor air handling unit system which purifies outdoor air. FA supply or contaminated indoor air ventilation rates in the 200 mm and 300 mm wafer fabrication facilities are approximately 10-25%. Furthermore, semiconductor clean rooms strictly controlled airborne particles(${\leq}1,000{\sharp}/ft^3$), temperature($23{\pm}0.5^{\circ}C$), humidity($45{\pm}5%$), air velocity(0.4 m/s), air change(60-80 cycles/hr), vibration(${\leq}1cm/s^2$), and differential pressure(atmospheric pressure$+1.0-2.5mmH_2O$) through air handling and contamination control systems. In addition, acids, alkali and ozone are managed at less than internal criteria by chemical filters. Conclusions: Semiconductor clean rooms can be a pleasant environment for workers as well as semiconductor devices. However, based on the precautionary principle, it may be necessary to continuously improve semiconductor processes and the work environment.

• 패션비즈니스
• /
• 제16권3호
• /
• pp.13-31
• /
• 2012

The purpose of the study was to analyze the work clothes' clothing comfort and wearer mobility of painting workers with the consideration of the work environment features in the machine and shipbuilding industries in South Korea. A questionnaire survey was conducted for the study, which consisted of questions on the clothing comfort and wearer mobility aspects of painting work clothes by clothes types and body parts. The work clothes' clothing comfort and wearer mobility levels were scaled in 5 points i.e. 1(: very tight/very uncomfortable) to 5(: very slack/very comfortable). The painting work environmental hazardous features were considered as high impact levels of workplace temperature, oxygen deficiency, organic solvent, toxic gas factors while metal fragment factor only impacts 'low' in the painting processes with the findings throughout this study. Since the painting work consisted of surface washing and the spray and touch-up painting processes, which was carried out in an outdoor work place, the painting work clothes should meet high performance of waterproofing from the painting material and air permeability specially in summer as well as thermal performance in winter. The subjects painting workers' assessment of the existing work clothes' clothing oppression was in the levels between 3 (i.e. moderate) and 4 (i.e. comfortable) in a range of 1 to 5 points. The existing painting work clothes' wearer mobility was evaluated 'very uncomfortable' in all work clothes parts, especially, armhole length, biacromial breadth, sleeve length of the jumper; and body rise, waist, hip, thigh and knee circumferences of the pants.

• 한국환경과학회지
• /
• 제29권6호
• /
• pp.673-682
• /
• 2020

This study investigates the concentration distribution of aldehydes and volatile organic compounds (VOCs) in the archive of the National Library in Korea and evaluates the health risks to workers from hazardous chemicals. Acetaldehyde had the highest concentration among the nine species of aldehydes present in the archive and the concentration of toluene was the highest among the six species of VOCs. Most of the detected substances showed that their indoor concentrations were higher than the outdoor ones, suggesting the possibility of indoor sources of aldehydes and VOCs. The evaluation of health risks for workers based on these measurement results showed that not all substances were hazardous to the human body. However, considering the possibility of the presence of indoor sources and the potential limits of our study owing its short period, it is necessary to conduct long-term studies on the concentration distribution of indoor pollutants in the archive environment.

• 한국보건간호학회지
• /
• 제19권1호
• /
• pp.18-29
• /
• 2005

The purpose of this study was to analyze the smoking behavior and to provide the basic data required to develop a smoking cessation program. The study subjects were 407 industrial workers in Jecheon. The data were collected using a structured questionnaire. The data were analyzed by the SPSS 10.0 system using descriptive statistics, t-test, and Chi-square test. The study results were as follows 1. Current smokers were $64.0\%$, ex-smokers were $19.1\%$. and non-smokers were $16.9\%$. 2. The most common motives of smoking were anger. anxiety, depression. and stress in the workplace. 3. In smoking habits, about $65.1\%$ of the current smokers smoked 11-20 cigarettes/day, and $91.0\%$ had smoked for more than 5 years. The smoking areas of the workplace were outdoor $37.9\%,\;rest\;room\;34.2\%,\; lobby\;23.0\%,\;corridor\;21.4\%,\;and\;office\;8.6\%$. 4. Regarding smoking cessation, $78.2\%$ of current smokers had attempted. The frequency of smoking cessation attempts was 1-3 or less in $67.2\%$ of smokers. The duration of smoking cessation was 1-3 month or less in $61.6\%$ of the smokers. 5. The mean score for smoking knowledge was 17.62, smoking attitude 75.74. and perceived health state 12.27. 6. There were significant differences between smokers and non-smokers 10 smoking attitude (t=5.29, p=0.00), and perceived health state(t=6.47, p=0.00). 7. As a result of the homogeneity test, both types of smoking and perceived health state proved to have significant differences in the change of health state compared with 4 weeks ago'$(x^2=20.26,\;p=0.00)$ and the level of satisfaction of health state in activities of daily living'$(x^2=15.47,\; p=0.05)$. The important findings of this study showed that a smoking cessation program needs to be developed to enhance the negative smoking attitude. to promote the perceived health state through smoking cessation, to encourage the intention of smoking cessation, and to develop strategies of stress management.

• 한국간호교육학회지
• /
• 제27권4호
• /
• pp.412-422
• /
• 2021

Purpose: The purpose of this study was to analyze the factors influencing the health promoting behavior(s) of office worker males in the COVID-19 pandemic by applying Pender's health promotion model. Methods: The participants in this study were 149 male office workers at companies located in S, G and S cities. The collected data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient and a stepwise multiple regression using the SPSS Window 25.0 program. Results: The subject's health promoting behaviors and prior related behaviors (r=.58, p<.001), perceived benefits of action (r=.41, p<.001), self-efficacy (r=.53, p<.001), social support (r=.39, p<.001), self-esteem (r=.47, p<.001) and commitment to a plan of action (r=.67, p<.001) showed a high positive correlation. The factors affecting the subjects' health promoting behaviors were the commitment to a plan of action (𝛽=.35, p<.001), self-esteem (𝛽=.27, p=.005), prior related behavior (𝛽=.26, p<.001), health status (good) (𝛽=.20, p=.001) and self-efficacy (𝛽=.14, p=.047). These variables explained 63.0% of the subjects' health promoting behaviors. Conclusion: During the COVID-19 pandemic, subjects are more likely to be exposed to disease due to reduced outdoor activity time and irregular eating habits due to the strengthening of social distancing. Health promoting behaviors are an important concept that can maintain health and prevent diseases. To improve the health promoting behaviors of men engaged in office work, it is necessary to develop and operate a health promotion behaviors program considering those variables.

• 환경위생공학
• /
• 제17권2호
• /
• pp.26-33
• /
• 2002

Ultimate objective of industrial hygiene is the prevention of health impairment that may result from exposure to chemicals at workplace. Workers in solvent thinner-using occupation environment may be highly exposed to VOCs (volatile organic compounds) because solvent thinner has been used extensively such as painting, spraying, degreasing, coating and so on in Korea. The purpose of this study was to recognize, evaluate, and propose the control methods of VOCs from solvent thinner-using workplace. Five target volatile organic compounds (benzene, toluene, ethylbenzene, o-xylene, and m-xylene) were monitored in H company of Shiwa Industrial Complex and analyzed in perosnal, occupational indoor and outdoor during working hours simultaneously. Engineering control such as local ventilation should be made in considering the long-term exposure, though measured VOCs concentration did not exceed the workplace exposure standards. In addition, air cleaning device should be installed in local ventilation because Shiwa Industrial Complex has had the serious ambient air pollution. Currently, environmental purification using $TiO_2$ photocatalyst have attracted a great deal of attention with increasing number of recent environmental problems. In this study, $TiO_2$ sol coated on the ceramic bead was prepared by sol-gel method and the photodegradation of target compounds was investigated in gas phase by the exposure to UV-A lamp(365nm) in a batch system.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.705-706
• /
• 2008

When heat generated inside a large factory building is not discharged due to a stagnant flow, the working environment of workers becomes worse and the cooling of high-temperature products such as hot-rolling coils is delayed. To investigate the natural ventilation inside a large factory building, experimental studies were carried out using wind-tunnel tests. The scale-down factory building models were placed in an atmospheric boundary layer (ABL) and the mean and fluctuating velocity fields were measured using a particle image velocimetry (PIV) technique. For the prototype factory model, the outdoor air is only entrained into the factory building through the one-third open windward wall, and stagnant flow is formed in the rear part of the target area. In order to improve the indoor ventilation environment of the factory building, three different louver-type ventilators were attached at the upper one-third open windward wall of the factory model. Among the three louver ventilators tested in this study, the ventilator model #3 with the outer louver (${\theta}_o$ = 90$^{\circ}$) and the inner louver (${\theta}_i$ = -70$^{\circ}$) was found to improve the natural ventilation inside the factory building model effectively. The flow rate of the entrained air was increased with aligning the outer louver blades with the oncoming wind and guiding the entrained air down to the ground surface with elongated inner louver blades.