• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.330-337
• /
• 2002

The HANARO seismic monitoring system is classified as non-nuclear safety(NNS), seismic category I, and quality class T The seismic monitoring system installed at the instrument room consists of five field sensors and one monitoring cabinet. The field sensors are composed of three triaxial accelerometers which installed at base slab, free field and overhead crane support respectively, a seismic trigger and a seismic switch at base slab. The most parts of analog system except field sensors are not produced any more, the improvement of the system is to be needed. The analog system with magnetic tape recorder is not only out-of-date model but dependent upon foreign technology. So it is difficult to get the spare parts and the cost to buy them is increased. Therefore we have improved the analog seismic monitoring system into a new digital seismic monitoring analysis system(SMAS) except five field sensors. After the installation of the new SMAS, we have carried out the site acceptance test(SAT) to confirm the field functions. The results of SAT satisfy the requirements of the fabrication technical specification. This new SMAS is operating at HANARO instrument room to acquire and analyse the signal of earthquake.

• Economic and Environmental Geology
• /
• v.17 no.2
• /
• pp.141-147
• /
• 1984

For the discussion of palaeogeomagnetic field direction and the movement and rotation of geotectonic blocks it is prerequisite to eliminate the secondary remanent magnetization component out of the NRM vector of given rock samples. Among various techniques alternating field and thermal demagnetization methods are most easily applicable and most widely used ones. Physical principle underlying these methods is the concept of relaxation time: Either with an action of external magnetic field or with an elevated temperature relaxation time of magnetic minerals can be drastically shortened. It has been furthermore shown experimentally that the secondary remanent magnetization can be more easily demagnetized than the primary remanent magnetization. Through careful stepwise demagnetization it should also be possible to discriminate the kind of various remanent magnetizations. In addition to the introduction to the underlying physical principles and experimental results of the alternating field and thermal demagnetization this paper gives various practical tips in earring out the demagnetization experiments. Each alternating field and thermal demagnetization instrumentation which is easily adaptable to domestic palaeomagnetic laboratories is also introduced. This paper provides a compact and practical introduction to the methods in palaeomagnetism and would be of interest to present workers and to those who want to embark on research in this field.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.89-95
• /
• 1996

The flow field around four cylinders for various angles was investigated utilizing particle image velocimetry(PIV) technique. Flow field was recorded by video camera first. Then application of PIV technique was done to the flow field. The results turned out to be useful to analyze complex flow field around multiple cylinders.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.48.1-48.1
• /
• 2010

A numerical simulation study of the solar coronal plasma reveals that a ballooning instability can develop in the course of flux rope merging. When magnetic field lines from different flux ropes reconnect, a new field line connecting farther footpoints is generated. Since the field line length abruptly increases, the field line expands outward. If the plasma beta is low, this expansion takes place more or less evenly over the whole field line. If, on the other hand, the plasma beta is high enough somewhere in this field line, the outward expansion is not even, but is localized as in a bulging balloon. This ballooning section of the magnetic field penetrates out of the overlying field, and eventually the originally underlying field and the overlying field come to interchange their apex positions. This process may explain how a field structure that has stably been confined by an overlying field can occasionally show a localized eruptive behavior.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.84.2-84.2
• /
• 2011

A numerical simulation study of the solar coronal plasma reveals that a ballooning instability can develop in the course of flux rope merging. When magnetic field lines from different flux ropes reconnect, a new field line connecting farther footpoints is generated. Since the field line length abruptly increases, the field line expands outward. If the plasma beta is low, this expansion takes place more or less evenly over the whole field line. If, on the other hand, the plasma beta is high enough somewhere in this field line, the outward expansion is not even, but is localized as in a bulging balloon. This ballooning section of the magnetic field penetrates out of the overlying field, and eventually the originally underlying field and the overlying field come to interchange their apex positions. This process may explain how a field structure that has stably been confined by an overlying field can occasionally show a localized eruptive behavior.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.2
• /
• pp.15-22
• /
• 2010

A series of field pull-out tests were carried out to investigate the behaviour of multi-pressurized soil nails. Ten soil nails were constructed in weathered soil and then, subjected to pull-out loads. The test results showed that the ultimate pull-out resistances of soil nails constructed with high pressure were about 42~142% larger than those obtained from conventional soil nails. The deduced interface shear strength at the ground-grout interface was 71 kPa for conventional soil nails, while higher shear strength of 95~166 kPa was obtained for pressurized nails. The diameter of grouted borehole increased by about 12~27% compared to ordinary soil nails under low pressure. Also, the predicted value by the cavity expansion theory is in good agreement with the measured expanded radius of grout under injection pressure by field pull-out tests.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.4
• /
• pp.19-25
• /
• 2009

In this study, field pull-out tests were performed for steel pipe nailing installed foldable wedge and non-wedge type steel pipe nailing under the same test conditions. This is to evaluate pull-out resistance improvement effect of steel pipe nailing installed foldable wedge. Evaluating for field pull-out characteristics of steel pipe nailing installed foldable wedge was performed through analysis of ultimate pull-out resistance ($T_L$), ultimate unit skin friction ($q_s$, $u_{max}$), tensile normal stiffness ($K_{\beta}$), tension of nail. As a result, the steel pipe nailing installed foldable wedge have an effect of pull-out resistance increased about 30% in comparison with non-wedge type steel pipe nailing.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.199-204
• /
• 2010

In this paper, we proposed trench field ring for breakdown voltage of power devices. The proposed trench field ring was improved 10% efficiency comparing with conventional field ring. we analyzed five parameters of trench field ring for design of trench field ring and carried out 2-D devices simulation and process simulations. That is, we analyzed number of field ring, juction depth, distance of field rings, trench width, doping profield. The proposed trench field ring was better to more 1000V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.1-5
• /
• 2010

In this paper, we proposed trench field ring for breakdown voltage of power devices. The proposed trench field ring was improved 10% efficiency comparing with conventional field ring. we analyzed five parameters of trench field ring for design of trench field ring and carried out 2-D devices simulation and process simulations. That is, we analyzed number of field ring, juction depth, distance of field rings, trench width, doping profield. The proposed trench field ring was better to more 1000 V.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.435-437
• /
• 2010

렌즈의 피사계심도 (Depth of Field)가 낮은 카메라로 영상을 획득 했을 때, 한 영상 내에도 in-focus 영역과 out of-focus 영역이 동시에 존재하게 된다. 따라서 영상을 복원하기 위해 in-focus 영역과 out-of-focus 영역을 구분하는 focus measure가 필요하게 된다. 기존 focus measure 알고리즘은 획득된 영상의 intensity 값의 절대적인 변화나 고주파수 성분 값에 따라 in-focus와 out-of-focus를 결정하기 때문에 out-of-focus 영역이 smooth 하지 않을 경우에는 in-focus 영역이라 잘못 판단할 수 있을 뿐만 아니라 잡음에 민감한 단점을 가진다. 본 논문에서는 기존 알고리즘의 한계점을 보완하는 연구 방향을 제시한다.