• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.404-413
• /
• 2006

This study examines multiple quality optimization of the injection molding for Polyether Ether Ketone (PEEK). It also looks into the dimensional deviation and strength of screws that are reduced and improved for the molding quality, respectively. This study applies the Taguchi method to cut down on the number of experiments and combines grey relational analysis to determine the optimal processing parameters for multiple quality characteristics. The quality characteristics of this experiment are the screws' outer diameter, tensile strength and twisting strength. First, one should determine the processing parameters that may affect the injection molding with the $L_{18}(2^1{\times}3^7)$ orthogonal, including mold temperature, pre-plasticity amount, injection pressure, injection speed, screw speed, packing pressure, packing time and cooling time. Then, the grey relational analysis, whose response table and response graph indicate the optimum processing parameters for multiple quality characteristics, is applied to resolve this drawback. The Taguchi method only takes a single quality characteristic into consideration. Finally, a processing parameter prediction system is established by using the back-propagation neural network. The percentage errors all fall within 2%, between the predicted values and the target values. This reveals that the prediction system established in this study produces excellent results.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.667-670
• /
• 2004

In this paper, we have presented the improved IF transceiver architecture and the implementation and experimental results on re-configurable transceiver based on digital IF for multiple wideband OFDM/TDD base stations for high-speed portable internet-service in which is issued Korea. The implemented IF transceiver has been designed to support multiple frequency allocations and multiple standards by only modifying the programmable software not its hardware like as the software-defined-radio concept. Also, the digital complex quadrature modulation technique has been used for the digital IF transmitter, which is able to combine multiple frequency bands in digital processing block not RF block and to reject the image frequency signals. And the bandpass sampling technique has been used for the digital IF receiver to reduce the sampling rate of ADC. This paper has shown the experiment results on the frequency response and constellation on the base-station implemented using the modified IEEE 802.16a/e physical layer channel structure based on OFDM/TDD.

• Applied Microscopy
• /
• v.24 no.3
• /
• pp.87-93
• /
• 1994

In order to elucidate the machinability of lead brass, orthogonal machining experiment was conducted in SEM(Scanning Electron Microscope) equipped with a micro-machining device at a cutting speed of $7{\mu}m/s$ for brass containing 0.2 to 3wt% Pb. The microfactors (i.e., shear angle, contact length between chip and tool) were determined by in-situ observations. Machinability of brass containing lead is discussed in terms of the microfactors and the cutting resistant force tested by lathe cutting. The dynamic behavior of the chip formation of lead brass during the machining process was examined: The chips of lead brass form as a shear angle type. The shear angle increases with the content of lead in (6:4) brass. The pronounced effect of lead on the contact length between chip and tool was observed above 1% Pb. The cutting resistant force tested by lathe decreases remarkably with the lead content in brass. The observed microfactors are in close relation to the tested resistant force in macromachining.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.206-213
• /
• 2014

This paper presents a novel 90 GHz band 16-quadrature amplitude modulation (16-QAM) orthogonal frequency-division multiplexing (OFDM) communication system. The system can deliver 6 Gbps through six channels with a bandwidth of 3 GHz. Each channel occupies 500 MHz and delivers 1 Gbps using 16-QAM OFDM. To implement the system, a low-noise amplifier and an RF up/down conversion fourth-harmonically pumped mixer are implemented using a $0.1-{\mu}m$ gallium arsenide pseudomorphic high-electron-mobility transistor process. A polarization-division duplex architecture is used for full-duplex communication. In a digital modem, OFDM with 256-point fast Fourier transform and (255, 239) Reed-Solomon forward error correction codecs are used. The modem can compensate for a carrier-frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of $10^{-5}$ at a signal-to-noise ratio of about 19.8 dB.

• KSBB Journal
• /
• v.25 no.4
• /
• pp.371-378
• /
• 2010

For the biodiesel fuel production from microalgae, the lipid from wet and dry samples of green algae Scenedesmus sp. was extracted by using various solvents and pre-treatment methods. Extraction yield of the lyophilized sample was better than that of dry sample. Chloroform/methanol (2:1, v/v) and ultrasonication or homogenization method were also selected as the most effective solvent and pre-treatment methods for lipid extraction, respectively. Under these constraint conditions, optimization experiment of lipid extraction was investigated by Taguchi approach using orthogonal matrix $L_9$ ($3^4$) method. The optimum extraction conditions of lipid extraction was obtained at pre-treatment of homogenization, extraction time of 5 hour, temperature of $35^{\circ}C$, and solvent ratio of 1:20 (w/v). Yield of extraction at optimized condition was 20.55% and it was 96% of total lipid content (21.38%) of Scenedesmus sp.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.57-62
• /
• 2015

A large variety of pipe flanges are required in the marine and construction industry. Pipe flanges are usually welded or screwed to the pipe end and are connected with bolts. This approach is very simple and has been widely used for a long time; however, it results in high development costs and low productivity, and the products made through this approach usually have safety problems in the welding area. In this research, a new approach for forming pipe flanges based on cold forging and the floating die concept is presented. This innovative approach increases the effectiveness of the material usage and saves time and costs compared with the conventional welding method. To ensure the dimensional accuracy of the final product, finite element analysis (FEA) was carried out to simulate the process of cold forging, and orthogonal experiment methods were used to investigate the influence of four manufacturing factors (stroke of distance, pin die angle, forming of pipe diameter, and speed of the die) and predict the best combination of them. The manufacturing factors were obtained through numerical and experimental studies, which show that the approach is very useful and effective for the forming of pipe flanges and could be widely used in the future.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.105-108
• /
• 2010

The product specification of the Continuous Hot Dip Galvanizing Line (CGL) changes and varies constantly with different customers' requirements, especially in the zinc coating weight which is from 30 to 150 g/$m^2$ on each side. Since the coating weight of zinc changes often, it is very important to reduce time spent in the transfer of target values changed for low production cost and yield loss. The No.2 CGL in China Steel Corporation (CSC) has improved the control of the air knife which is designed by Siemens VAI. CSC proposed an experiment design which is an $L_9(3^4)$ orthogonal array to find the relations between zinc coating weight and the process parameters, such as the line speed, air pressure, gap of air knife and air knife position. A non-linear regression formula was derived from the experimental results and applied in the mathematical model. A new air knife feedforward control system, which is coupled with the regression formula, the air knife control system and the process computer, is implemented into the line. The practical plant operation results have been presented to show the transfer time is obviously shortened while zinc coating weight target changing and the product rejected ratio caused by zinc coating weight out of specification is significantly reduced from 0.5% to 0.15 %.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.44-51
• /
• 2006

This paper deals with the aspects of die design for the multistage fine tooth hub gear in the cold forging process. In order to manufacture the cold forged product for the precision hub gear used as the ARD 370 system of bicycle, it examines the influences of different designs on the metal flow through experiments and FE-simulation. To find the combination of design parameters which minimize the damage value, the low gear length, upper gear length and inner diameter as design parameters are considered. An orthogonal fraction factorial experiment is employed to study the influence of each parameter on the objective function or characteristics. The optimal punch shape of fine tooth hub gear is designed using the results of FE-simulation and the artificial neural network. To verify the optimal punch shape, the experiments of the cold forging of the hub gear are executed.

• Tribology and Lubricants
• /
• v.34 no.4
• /
• pp.132-137
• /
• 2018

Ultrasonic waves are used in various applications in multiple devices, sensors, and high-power machinery, such as processing machines, welders, and cleaners, because the acoustic vibration frequencies are above the human audible frequency range. In ultrasonic machining, electrical energy at a high frequency of 20 kHz or more is converted into mechanical vibration by a vibrator and an amplifier. This technique allows instantaneous separation between a tool and a workpiece during machining, machining by pulse impulse force at the time of re-contact and minimizes the minute elastic deformations of the workpiece and machine tools due to the cutting effect. The Al7075 alloy used in this study is a typical aluminum alloy with superior strength that is mainly used in aircrafts, automobiles, and sporting goods. To investigate the optimal conditions for machining aluminum alloy using ultrasonic vibration, the present experiment utilized the Taguchi orthogonal array method, and the coefficient of friction was analyzed using the characteristics of the Taguchi technique. In ultrasonic friction and abrasion tests, the changes in the friction coefficient were measured in the absence of ultrasonic vibrations and at 28 kHz and 40 kHz. As a result, the most considerable influence on the friction coefficient was found to be the normal load, and the frequency of ultrasonic vibrations increases, the coefficient of friction increases. It was thus confirmed that the amount of wear increases when ultrasonic vibration is applied.

• IE interfaces
• /
• v.11 no.3
• /
• pp.23-40
• /
• 1998

In this paper, a method to determine the optimal configuration of operating policies in an integrated-automated manufacturing system using the Taguchi method and computer simulation experiments is presented. An integrated-automated manufacturing system called direct-input-output manufacturing system(DIOMS) is described. We only consider the operational aspect of the DIOMS. Four operating policies including input sequencing control, dispatching rule for the storage/retrieval(S/R) machine, machine center-based part type selection rule, and storage assignment policy are treated as design factors. The number of machine centers, the number of part types, demand rate, processing time and the rate of each part type, vertical and horizontal speed of the S/R machine, and the size of a local buffer in the machine centers are considered as noise factors in generating various manufacturing system environment. For the performance characteristics, mean flow time and throughput are adopted. A robust design experiment with inner and outer orthogonal arrays are conducted by computer simulation, and an optimal configuration of operating policies is presented which consists of a combination of the level of each design factor. The validity of the optimal configurations is investigated by comparing their signal-to-noise ratios with those obtained with full factorial designs.