• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.235-241
• /
• 2006

Catalytic combustion is one of the suitable methods for micro power source due to high energy density and no flame quenching. Catalyst loading in the micro structured combustion chamber is one of the most important issues in the development of micro catalytic combustors. In this research, to coat catalyst on the chamber wall, two methods were investigated. First, $Al_2O_3$ was selected as a support of Pt and $Pt/Al_2O_3$ was synthesized through the alumina sol-gel procedure. To improve the coating thickness and adhesion between catalyst and substrate, heat resistant and water solvable organic-inorganic hybrid binder was used. Porous silicon was also investigated as a catalyst support for platinum. Through the parametric studies of current density and etching time, fabrication process of $1{\sim}2{\mu}m$ of diameter and about $25{\mu}m$ depth pores was confirmed. Coated substrates were test in the micro channel combustor which was fabricated by the wet etching and machining of SUS 304. Using $Pt/Al_2O_3$ coated substrate and Pt coated porous silicon substrate, conversion rate of fuel was over 95% for $H_2$/Air premixed gas.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.1
• /
• pp.26-29
• /
• 2014

The corrosion behavior of stainless steel 304 (SS 304), titanium, nickel and aluminium is studied by immersion and anodic polarization tests in non-aqueous electrolytes. Tetraethyl ammonium tetrafluoroborate is used as a supporting electrolyte in the three kinds of solvents. The immersion test shows that chemical corrosion rate in propylene carbonate-based electrolyte is lower than those in acetonitrile- or ${\gamma}$-butyrolactone-based electrolytes. Surface analyses do not reveal any corrosion product formed after the immersion test. In the anodic polarization tests, a higher concentration of supporting electrolyte gives a higher current density. In addition, a higher temperature increases the current density in the active region and reduces the potential range in the passive region. SS 304 shows the highest corrosion potential while Al shows the lowest corrosion potential and the highest current density in all studied conditions. Based on the conducted corrosion tests, the corrosion resistance of metal substrates in the organic solvents can be sorted in descending order as follows: SS 304 - Ti - Ni - Al.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.515-521
• /
• 2004

Anaerobic digestion has many advantages over the more conventional aerobic treatment processes such as low levels of excess sludge production, low space (area) requirements, and the production of valuable biogas. The purpose of this study was to evaluate the effect of organic loading rate of anaerobic digestion on thermophilic($55^{\circ}C$) and mesophilic($35^{\circ}C$) conditions. Fluorescent in situ hybridization (FISH) method was also used to study the microbial community in the reactors. The stabilizing time in mesophilic anaerobic reactors was shorter as approximately 20 days than 40 days in the thermophilic anaerobic reactors. The amount of methane production rate in anaerobic reactors was independent of the concentrations of supplied substrates and the amount of methanogens. When the microbial diversity in the mesophilic and thermophilic reactors, which had been treated with acetate-based artificial wastewater, were compared, it was found that methanogenesis was carried out by microbial consortia consisting of bacteria and archaea such as methanogens. To investigate the activity of bacterial and archaeal populations in all anaerobic reactors, the amount of acetate was measured. Archaea were predominant in all reactors. Interestingly, Methanothrix-like methanogens appeared in mesophilic anaerobic reactors with high feed substrate concentrations, whereas it was not observed in thermophilic anaerobic reactors.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.94-99
• /
• 2015

Lead zirconate titanate (PZT) thick films with thicknesses of ㎛ were fabricated on silicon substrates using an aerosol deposition method. A PZT powder solution was prepared using a sol-gel process. The average diameters (d50) obtained were 1.67, 1.98, and 2.40μm when the pyrolysis temperatures were 300℃, 350℃, and 450℃ respectively. The as-deposited film had a uniform microstructure without any cracks or pores. The as-deposited films on silicon were annealed at a temperature of 700℃. The 20-㎛-thick PZT film showed good adherence between the PZT film and substrate, with no tearing observed in the conventional solid phase process. This was probably because the presence of pores produced from organic residue during annealing relieved the residual stresses in the deposited film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.451-451
• /
• 2009

CdTe는 에너지밴드갭이 1.45eV인 직접천이헝 II-VI 화합물 반도체로서 높은 광홉수율과 가시광 영역의 에너지밴드캡으로 태양전지, x-선 검출기 등에 널리 사용되고 있다. 본 연구에서는 Metal Organic Chemical Vapor Deposition (MOCVD)으로 Si 기판위에 CdTe 에피 박막을 성장 하고자 하였다. Cd, Te의 금속유기 화합물로는 Dimethylcadmium(DmCd)과 Diisopropyltellurium(DIPTe)을 사용하였다. 기판으로는 Si 을 사용하였으며 박막성장 온도를 $360^{\circ}C\;{\sim}\;500^{\circ}C$로 제어하여 에피박막이 형성되는 조건을 얻고자 하였다. $360^{\circ}C$, $450^{\circ}C$에서 성장된 CdTe박막은 다양한 방향이 존재하는 다결정 구조 였으며 $500^{\circ}C$의 경우 단결정 에피 박막 성장이 이루어졌음을 확인하였다. 본 연구를 통한 CdTe 에피박막은 기존의 열증착 등으로 제조되는 다결정 CdTe 박막과 비교하여 높은 에너지변환 효율을 얻을 것으로 기대된다.

• Korean Journal of Clinical Pharmacy
• /
• v.23 no.4
• /
• pp.316-321
• /
• 2013

Purpose: Atorvastatin, a HMG-CoA reductase inhibitor is widely prescribed in hyperlipidemic patients and telmisartan, an angiotensin receptor blocker is frequently used in the treatment of hypertension. Both drugs are substrates of organic anion transporting polypeptide (OATP) expressed in basolateral membrane in the liver, and undergo high first pass metabolism. Therefore, OATP-mediated hepatic uptake is important for disposition and metabolism of these drugs. The present study was designed to investigate the pharmacokinetic interactions between atorvastatin and telmisartan in rats. Method: Young adult SD rats were divided into three groups (n=6, each) and atorvastatin (10 mg/kg) and telmisartan (4 mg/kg) were orally given alone and together. Heparinized blood was serially taken and plasma concentrations of both drugs were measured using HPLC-MS/MS. Pharmacokinetic parameters of two drugs were calculated. Results: No significant pharmacokinetic change was found except a delay of time to peak of telmisartan when administered with atorvastatin. Each drug at the present dosage seemed to be insufficient to alter the pharmacokinetic parameters of its counterpart drug. Conclusion: Conclusively, co-administration of atorvastatin and telmisartan may lead to negligible clinical consequences.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.247-252
• /
• 2002

$(Pb_{1-x}La_x)TiO_3$ (x = 0.1) thin films were prepared on ITO-coated glass substrates by metal organic chemical vapor deposition using ultrasonic spraying. Effects of the post-annealing and the seeding layer on crystallization, microstructures and electrical properties of thin films were investigated. Dielectric constants of films increased due to the modification of crystallization and the changing of a surface morphology by applying the post-annealing. In addition, as the application of PT seed- ing layer offered nucleation sites to PLT thin films, electrical properties of films were enhanced by the increase of crys-tallinity and grain size. The dielectric constant of the films post-heated for 60 min and with a seeding layer was 213 at 1 kHz.

• Journal of Animal Environmental Science
• /
• v.21 no.1
• /
• pp.9-20
• /
• 2015

The livestock manure recycling have been performed worldwide because of its environmental and economic benefits. However, domestic standard protocol was nothing for high solid manure. Therefore, This paper was conducted to review database configuration of manure characteristics, analysis methods, bio-methane potential test for high solid manure recycling. In American society of agricultural engineers standard, manure characteristics indicated about sort of thirty types. This is important information to determine for manure recycling method. Furthermore, in order to determine exact manure characteristics recommended that synchronized chemical analysis method among studies. Bio-methane potential tests are widely performed in studies about estimation of organic substrates methane production. Although various methods and parameters were used, was no standard protocol and guideline in domestic. Bio-methane potential test methods and parameters were reviewed through various researches. Consequently, this paper is expected that assist to additional studies and manure characteristic database.

• Journal of Sensor Science and Technology
• /
• v.20 no.5
• /
• pp.305-310
• /
• 2011

This study focuses on the fabrication of $TiO_2$ nanosheets and their gas sensor application. A simple sonochemical method is employed to fabricate the $TiO_2$ nanosheets. The obtained samples were investigated by transmission electron microscope(TEM) and X-ray Diffraction(XRD). The $TiO_2$ nanosheets were coated on substrates by a dropping method followed by heat treatment. The sensor responses to volatile organic compounds(VOCs) such as toluene, benzene, ethanol and acetaldehyde were studied. It was found that the $TiO_2$ nanosheets sensors are able to detect ppb-levels of VOC gases.

• The Korean Journal of Mycology
• /
• v.14 no.2
• /
• pp.101-107
• /
• 1986

The properties of carboxyl proteinase which was contained in Poria cocos (Schw.) Wolf were investigated by means of the purification with 0.65 ammonium sulfate saturation, DEAE cellulose and Sephadex G-75 gel filtration. This enzyme was found to hydrolyze only peptide bond between glutamyl-L-tyrosine of carbobenzoxy-L-glutamyl-L-tyrosine among the synthetic substrates of carbobenzoxy-L-glutamyl-L-tyrosine, hippuryl- L-phenylalanine and hippuryl-L-arginine. This enzyme was inhibited by $Zn^{+2},\;Fe^{+2},\;Ca^{+2},\;CN^{-1},\;P_2O_7^{-4}$ ions, but stimulated by $Hg^{+2}$ ion. Also, this enzyme was inhibited by organic compounds such as L-lysine, L-phenylalanine, hippuryl-L-phenylalanine, diazoacetyl-DL-norleucine methyl ester (DAN) and 1,2-epoxy-3-(P-nitrophenoxy)propane(EPNP). In particular, the activity was inhibited by L-lysine till 20 minutes of preincubation time rapidly, and by DAN in the presence of $Cu^{+2}$ ion more rapidly after 30 minutes than DAN in the absence of $Cu^{+2}$ ion. L-Lysine was found to be a competitive inhibitor and its $K_i$ value was determined to be 0.12 mmole by Dixon plot.