• Title/Summary/Keyword: Organic reaction in water

Search Result 449, Processing Time 0.028 seconds

Preparation and Performance of Synthetic Organo-beidellite (유기 바이델라이트의 합성 및 거동 연구)

  • Ryu, Gyoung-Won;Jang, Young-Nam;Cho, Sung-Jun;Choi, Sang-Hoon
    • Journal of the Mineralogical Society of Korea
    • /
    • v.19 no.2 s.48
    • /
    • pp.123-128
    • /
    • 2006
  • Beidellite, a member of the dioctahedral smectite group, was synthesized hydrothermally from dickite. Organophilic [DEACOOH]-beidellite intercalation complex was formed by the cation exchange reaction between synthetic Na-beidellite and [DEACOOH]Br. The products dried in high vacuum were treated with various organic solvent such as methanol, ethanol, acetone, ether, acetonitrile and caprolactam in order to determine the swelling behaviour of the prepared complexes. After drying under high vacuum, basal spacing of [DEACOOH]-beidellite shows 15.1 ${\AA}$, and it changed to 19.4, 29.9, 15.9, 16.8, 14.8, 26.5 and 14.8 ${\AA}$ under distilled water, methanol, ethanol, acetone, ether, acetonitrile and caporlactam, respectively. Especially, the characteristics of the intercalation complexes and their swelling behavior of the synthetic beidellite and natural montmorillonite were compared.

The Characteristics of Fine Granitic Soils on a Drainage Catena in Hwayang Ri, Pyeongtaeg Area (배수(排水) Catena에 있어서 세입질(細粒質) 화강암(花崗岩) 토양(土壤)의 특성(特性) (평택군(平澤郡) 현덕면(玄德面), 화양리(華陽里)))

  • Rim, Sang-Kyu;Jung, Seog-Jae;Moon, Joon;Um, Ki-Tae
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.18 no.3
    • /
    • pp.276-281
    • /
    • 1985
  • This study was conducted to examine the morphological, physical and chemical characteristics of the Song-jeong (residuum), Dae-gog (local colluvium-alluvium), Ji-san and Og-cheon (local-alluvium) series with fine loamy texture derived from fine granitic parent materials on the drainage catena. 1. These soils consist of a catena, and then a color sequence due to the influence of topography, water table and free iron content. 2. The poorer the drainage, the higher were the silt/clay ratio, soil reaction, organic matter, and available phosphate content in soils but the active iron content was lower.

  • PDF

A Study on the Dyeing Characteristics by Reproduction of Hwangsu Spring

  • Ahn, In-Yong;Suh, Hwa-Jin;Song, Eun-Young;Na, Seon-Young;Park, Ji-Ju;Park, Young-Mi;Jung, Jin-Young;Kwon, Oh-Oun
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2011.11a
    • /
    • pp.42-42
    • /
    • 2011
  • To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordants effect of Hwangsu spring were analyzed by pH, temperature, trace elements, organic matter and color fastness. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, in Yeongcheon (Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. Hwangsu spring during storage at $25^{\circ}C$ turned brown by photochemical reaction. The Result of ICP analysis, it contained Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm) and observed character by water analysis. Dyeing and post-mordant procedure; Cotton(KS K 0905) were dyed with clove powder for 30 min at $70^{\circ}C$. Hwangsu spring, Aluminium Sulfate $14-18H_20(Al_2(SO_4)_3{\cdot}14-18H_2O)$, Iron Sulfate Heptahydrate($FeSO_4{\cdot}7H_2O$) were used by post mordant at the same ratio. The dyed fabrics were treated with 20% each mordant solution at $25^{\circ}C$ for 10min. Comparison with a reproduced chemical mordant, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

  • PDF

Highly Photocatalytic Performance of flexible 3 Dimensional (3D) ZnO nanocomposite

  • Lee, Hyun Uk;Seo, Jung Hye;Son, Byoungchul;Kim, Hyeran;Yun, Hyung Joong;Jeon, Cheolho;Lee, Jouhahn
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.08a
    • /
    • pp.270.1-270.1
    • /
    • 2013
  • Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and largearea production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

  • PDF

Improved structures of stainless steel current collector increase power generation of microbial fuel cells by decreasing cathodic charge transfer impedance

  • Nam, Taehui;Son, Sunghoon;Kim, Eojn;Tran, Huong Viet Hoa;Koo, Bonyoung;Chai, Hyungwon;Kim, Junhyuk;Pandit, Soumya;Gurung, Anup;Oh, Sang-Eun;Kim, Eun Jung;Choi, Yonghoon;Jung, Sokhee P.
    • Environmental Engineering Research
    • /
    • v.23 no.4
    • /
    • pp.383-389
    • /
    • 2018
  • Microbial fuel cell (MFC) is an innovative environmental and energy system that converts organic wastewater into electrical energy. For practical implementation of MFC as a wastewater treatment process, a number of limitations need to be overcome. Improving cathodic performance is one of major challenges, and introduction of a current collector can be an easy and practical solution. In this study, three types of current collectors made of stainless steel (SS) were tested in a single-chamber cubic MFC. The three current collectors had different contact areas to the cathode (P $1.0cm^2$; PC $4.3cm^2$; PM $6.5cm^2$) and increasing the contacting area enhanced the power and current generations and coulombic and energy recoveries by mainly decreasing cathodic charge transfer impedance. Application of the SS mesh to the cathode (PM) improved maximum power density, optimum current density and maximum current density by 8.8%, 3.6% and 6.7%, respectively, comparing with P of no SS mesh. The SS mesh decreased cathodic polarization resistance by up to 16%, and cathodic charge transfer impedance by up to 39%, possibly because the SS mesh enhanced electron transport and oxygen reduction reaction. However, application of the SS mesh had little effect on ohmic impedance.

Effect of Perovskite Surface Treatment Using Oxygen Atmospheric Pressure Plasma (산소분위기의 상압플라즈마를 이용한 페로브스카이트 표면 처리 효과)

  • Kim, Kyoung-Bo;Lee, Jongpil;Kim, Moojin
    • Journal of Convergence for Information Technology
    • /
    • v.11 no.6
    • /
    • pp.146-153
    • /
    • 2021
  • Recently, research on perovskite semiconductor materials has been performed, and the evaluation of properties using surface treatment for this material is the basis for subsequent studies. We studied the results of surface treatment of perovskite thin films exposed to air for about 6 months by generating oxygen plasma with an atmospheric pressure plasma equipment. The reason for exposure for 6 months is that the perovskite thin film is made of organic and inorganic substances, so when exposed to air, the surface changes through reaction with oxygen or water vapor. Therefore, this change is to investigate whether it is possible to restore the original film. The surface shape and the ratio of elements were analyzed by varying the process time from 1 s to 1200 s in an oxygen plasma atmosphere. It was found that the crystal grains change over a process time of 5 s or more. In order to maintain the properties of the deposited film, it is the optimal process condition between 2 s and 5 s.

A Study on the Cause and Improvement of the Red-Water Occurrence in Urban Stream (도심하천 내 적수발생 지점에 대한 원인검토 및 개선방안 연구)

  • Beomjin Eun;Jong Hwan Kim;Zi Yu Lin;Jeong Sook Heo;I Song Choi;Jong-Min Oh
    • Journal of Environmental Impact Assessment
    • /
    • v.32 no.3
    • /
    • pp.166-175
    • /
    • 2023
  • This study aims to identify the cause of the red-water occurrence (the phenomenon of water being red) that occurs at some points and sections of rivers in Yongin City. As a result of conducting a preliminary investigation, total three sites were selected as the investigation point as it was found that the red-water occurrence continued. As a result of the investigation, it is judged that the cause of the red-water in Yongin-city river is due to the soil color and iron content of the region. JPS, SBS, and JJS sites all showed that the color of soil is mainly consist of reddish brown and red-yellow. The average Fe concentration was 13.75 mg/L, 10.85 mg/L, and 1.31 mg/L, for each sites, and considering that the Fe concentration in general river water was less than 0.5 mg/L, it was confirmed that the concentration was quite high. At the JPS and JJS points, the red-water occurrence occurred mainly in stagnant places, which is believed to be strengthened by the reaction of organic and microorganisms. In the case of SBS, the wateris red, but as a result of observing the actual color, it is judged that the iron component deposited in the pipe causes an optical illusion with a deep red color. In addition, it is believed that the iron concentration can be reduced to the general river water concentration range by removing the particulate iron component through a decrease of more than 95% as a result of filtering with glass fiber filter with particulate iron. As a result of this study, it is necessary to manage the river to maintain the flow, and it is believed that the occurrence of red-water at the survey point can be alleviated through uptake action through planting and agglomeration precipitation and agglomeration filtration methods for particulate iron treatment.

Formation of Brushite (CaHPO4 · 2H2O) in the Oyster Extracts (굴 엑기스에서 결정물질 Brushite(CaHPO4 · 2H2O)의 생성)

  • Lee, Jong-Soo;Yoon, So-Mi;Jang, Jun-Ho;Lim, Chi-Won;Choi, Kwang-Yeol
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.35 no.6
    • /
    • pp.729-733
    • /
    • 2006
  • Small yellowish brown crystals were found in some concentrated oyster extracts which prepared by heating with the drip and washed water of boiled oyster in oyster processing factories. We collected those crystals by filtering the oyster extracts and analysed X ray diffraction (XRD), scanning electron microscopy (SEM) and minerals by ICP. Those were composed of moisture (8.1%), organic materials (21.6%) and inorganic materials (70.2%). Those major inorganic materials were determined as Ca (53.8%) and P (43.8%), from the ICP and elucidated those crystal as brushite $(CaHPO_4{\cdot}2H_2O)$ by XRD and SEM. Organic materials contained crude protein (33.7%) consisting of 7 amino acids. It is presumed that brushite may be formed by the reaction of excess Ca with P in the oyster extracts during concentrating process under higher temperature.

Steam Gasification Characteristics of Wood Pellet (우드펠릿의 스팀가스화 특성)

  • Hwang, Hoon;Lee, Moon-Won;Choi, Sun-Yong;Kim, Lae-Hyun
    • Journal of Energy Engineering
    • /
    • v.19 no.4
    • /
    • pp.215-220
    • /
    • 2010
  • Hydrogen is a clean and efficient energy source and is expected to take an important role in future energy demand. A possibly good route to produce hydrogen is by using biomass and organic wastes as a source through thermo-chemical conversion technology. In this study, pyrolysis of wood Pellet(Oregon pine) has been carried out in batch type fixed-bed reactor in $N_2$ atmosphere during 20 minutes to determine the optimum hydrogen generating conditions. At the influence of temperature, hydrogen yield was increased with increasing temperature. For the influence of Steam/Biomass Ratio(SBR), hydrogen yield was increased by steam addition at low temperature condition. However, effect of steam addition was insignificant over at SBR = 1. The hydrogen yield was increased with increasing SBR at high temperature condition. From result of $H_2$/CO and $H_2/CH_4$ ratio, dominant reaction was steam reforming in this experimental condition. The optimum condition for hydrogen production was determined as follows: $H_2$ yield = 38.3 vol.% (56.01 L/min kg) at $900^{\circ}C$, SBR=3.

Anti-invasion Effects of Calystegia soldanella Solvent Extracts and Partitioned Fractions on PMA-stimulated Fibrosarcoma Cells (갯메꽃 추출물과 유기용매 분획물의 암전이 억제 효과)

  • Son, Jaemin;Kim, Junse;Kim, Hojun;Seo, Youngwan
    • Journal of Life Science
    • /
    • v.29 no.3
    • /
    • pp.287-294
    • /
    • 2019
  • Calystegia soldanella is distributed in coastal sand dunes and has high environmental adaptability; it is also known to be effective for anti-oxidant, anti-pyretic, anti-septic, and diuretic action. This study investigated the effect of crude extracts and organic solvent fractions of C. soldanella on MMP-2 and MMP-9 expression, MMP activity, and cell mobility in phorbol-12-myristate-13-acetate (PMA)-induced fibrosarcoma HT-1080 cells. C. soldanella was twice extracted, once with methylene chloride (MC) and once with methanol (MeOH). After the MC and MeOH extracts were combined, their suppressive effects on MMP-2 and MMP-9 expression, MMP enzymatic activity, and gene and protein expression were measured by gelatin zymography, enzyme-linked immunosorbent assay, reverse-transcription polymerase chain reaction, and western blot method. Cell mobility for the HT-1080 cells was observed by wound healing assay. The combined crude extracts showed a significant suppressive effects on MMP-2 and MMP-9 expression. To explore active inhibitory elements, the combined extracts were fractionated according to polarity into with n-hexane, 85% aqueous methanol, n-butanol, and water. Across these four solvent fractions, MMP-2 and MMP-9 activity and cell mobility in the HT-1080 cells were all strongly inhibited by the n-hexane fraction. These results suggest that C. soldanella extract and organic solvent fractions could be used as potent MMP inhibitors for effective anti-cancer treatments to suppress cancer invasion and metastasis.