• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.225-228
• /
• 2002

Amorphous $Ga_2O_3$ films have been grown on Si(100) substrates by metal organic chemical vapor deposition (MOCVD) using gallium isopropoxide, $Ga(O^iPr)_3$, as single precursor. Deposition was carried out in the substrate temperature range 400-800 $^{\circ}C$. X-ray photoelectron spectroscopy (XPS) analysis revealed deposition of stoichiometric $Ga_2O_3$ thin films at 500-600 $^{\circ}C$. XPS depth profiling by $Ar^+$ ion sputtering indicated that carbon contamination exists mostly in the surface region with less than 3.5% content in the film. Microscopic images of the films by scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed formation of grains of approximately 20-40 nm in size on the film surfaces. The root-mean-square surface roughness from an AFM image was ${\sim}10{\AA}$. The interfacial layer of the $Ga_2O_3$/Si was measured to be ${\sim}35{\AA}$ thick by cross-sectional transmission electron microscopy (TEM). From the analysis of gaseous products of the CVD reaction by gas chromatography-mass spectrometry (GC-MS), an effort was made to explain the CVD mechanism.

• 대한화학회지
• /
• 제7권3호
• /
• pp.216-224
• /
• 1963

有機含鹽素 에스테르, 알콜, 및 산과 金屬亞鉛 및 錫을 dimethyl formanmide 溶媒存在下에서 反應시킨 結果 有機金屬 콤프렉스를 좋은 收率로 生成하였다. 같은 反應을 混合紫外線照射下에서 進行시킨 結果 高溫 以外에서는 콤프렉스의 生成이 크지못하였다. D.M.F.에 依한 金屬 콤프렉스의 溶解效果는 토루엘이나 사이크로헥산보다 훨씬 컸었다. 鹽素를 含有한 酸에서는 酸의 金屬鹽의 金屬 콤프렉스가 生成됨을 觀察하였다. 카보닐 precursor와의 反應에 있어서는 少量의 雙合物과 함께 附加物을 生成하였으나 收率이 높지 못하였다(산 30∼40%, 에스테르 73%, 알콜 14.6%). 그러나 이 方法은 從來法에 比하여 簡便한 것임을 알았다. 硏究結果를 溶媒效果에 關聯시켜 論議하였으며 實驗方式을 報告하였다.

• 폴리머
• /
• 제37권5호
• /
• pp.587-591
• /
• 2013

Poly(3,4-ethylenedioxythiophene)(PEDOT)은 높은 전기 전도도, 광학적 투과성 및 좋은 화학적 안정성을 가지고 있는 반면 낮은 물리화학적 물성을 가지고 있다. 본 연구의 목적으로 PEDOT의 내용제성 및 필름경도와 같은 물리화학적 특성을 향상시키고자 하였다. 음이온성 수성폴리우레탄(WPU)이 가지는 카르복실기는 아지리딘 존재 하에서 효과적인 가교반응이 일어나 물리화학적 특성이 개선된 WPU/PEDOT 혼성 전도성 박막을 제조할 수 있다. 다양한 WPU 및 고형분 함량별로 WPU/PEDOT 유기-유기 혼성 박막을 제조하여 전기적/물리화학적 특성을 비교하였다. 고형분 함량이 증가할수록 투과율과 표면저항은 감소하였다. WPU/PEDOT 혼성 전도성 박막의 연필경도와 내용제성이 WPU가 가지는 카르복실기의 가교반응에 인해 효과적으로 증가하였다.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.315-320
• /
• 2020

Methylammonium lead iodide (MAPbI₃) thin films were grown at low temperatures on glass substrates via 3-zone chemical vapor deposition. Lead iodide (PbI₂) and lead bis (dipivaloylmethanate) [Pb(dpm)₂] precursors were used as lead sources. Due to the high sublimation temperature (~400℃) of the PbI₂ precursor, a low substrate temperature could not be constantly maintained. Therefore, MAPbI₃ thin films degraded into the PbI₂ phase. In contrast, for the Pb(dpm)₂ precursor, a substrate temperature of ~120℃ was maintained because the sublimation temperature of Pb(dpm)₂ is as low as 130℃ at a high vapor pressure. As a result, high-quality MAPbI₃ thin films were successfully grown on glass substrates using Pb(dpm)₂. The rms (root-mean-square) roughness of MAPbI₃ thin films formed from Pb(dpm)₂ was as low as ~19.2 nm, while it was ~22.7 nm for those formed using PbI₂. The grain size of the films formed from Pb(dpm)₂ was as large as approximately 350 nm.

• 상하수도학회지
• /
• 제21권1호
• /
• pp.37-46
• /
• 2007

A feasibility test was conducted to evaluate the addition of turbidity substance in a coagulation process to remove natural organic matters (NOM), the precursor of disinfection by-products (DBPs). The experimental water sources were synthetic water containing 5 mg/L of humic acid and 50 mg/L of NaHCO3 and drinking water resource of Ulsan city (S Dam water, D Dam water and Nak-Dong raw water). The examined turbidity substances were kaolin, acid clay, and modified clay (0.38 meq $NH_4{^+}-N/g$ clay). In Jar tests at different concentrations of the turbidity substances (5, 10, 15, 20, 30 mg/L) using the synthetic water, the turbidity substances improved the removal of turbidity, UV-254 absorbance and dissolved organic carbon (DOC) by 23.8-38.1%, 17.0-24.5% and 2.5-44.5%, respectively. The modified clay showed higher removal efficiencies than other substances. In Jar tests using the drinking water, 10 and 20 mg/L of modified clay enhanced the removal efficiencies of turbidity, UV-254 absorbance, DOC, trihalomethane formation potential (THMFP), and haloacetic acid formation potential (HAAFP) by 3.0~4.3%, 19.1~29.0%, 12~34.9%, 4.9~36.7%, and 1.6~30.2%, respectively.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.665-672
• /
• 2000

The ferroelectric YMnO3 thin films were prepared by MOD(metal-organic decomposition) method with Y- and Mn-acetylacetonate as starting materials. Thin films were grown on various substrates by spin-coating technique. The crystalline phases of the thin films were identified by X-ray diffractometer as a function of heat-treatment temperature, pH of coating solution and substrate. In addition, the effect of Mn/Y molar ratio(0.8~1.2) on the formation of hexagonal-YMnO3 phase was investigated. In forming highly c-axisoriented hexagonal-YMnO3 single phase, the Pt coated Si substrate was more effective than the bare Si substrate, and the optimum heat-treatment condition was at 82$0^{\circ}C$ for 30 min. Higher Mn/Y molar ratio within 0.8~1.2 and pH of YMnO3 precursor solution within 0.5~2.5 favored formation of ferroelectric hexagonal phase rather than orthorhombic phase. Leakage current density of the hexagonal-YMnO3 thin film formed on Pt(111)/TiO2/SiO2/Si substrate was low enough as 0.4~4.0$\times$10-8(A/$\textrm{cm}^2$) at 5 V and its remanent polarization(Pr), calculated from the P-E hysteresis loop, was 3 nC/$\textrm{cm}^2$.

• 상하수도학회지
• /
• 제19권3호
• /
• pp.370-377
• /
• 2005

Dispersion of coagulant should be completed in a fraction of a second before the metal hydroxide precipitate has form. For the reason so-called pump diffusion flash mixing (PDFM) have been proposed, and PDFM is one of reasonable methods to quickly disperse the hydrolyzing metal salts. In this study, therefore, we attempt to understand the difference of removal characteristics of natural organic matter (NOM) between pump diffusion flash mixing (PDFM) and conventional rapid mixing (CRM) for coagulation in a water treatment system, and to enhance the removal of NOM through the improved mixing process. DOC and turbidity removal by PDFM higher than those by CRM, while SUVA value of water treated by PDFM was high as compared with that by CRM. Hydrophilic NOM was more effectively removed by PDFM than CRM, since charge neutralization effect increased by quick dispersion of coagulant. The DBP formation potentials due to NOM was effectively reduced by the improved mixing (i.e., PDFM) for coagulation and could be controlled through decrease in concentration of precursor rather than reduction of activity with disinfectant.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1117-1123
• /
• 2004

The characteristics of soot near the soot inception point for an ethene-air flame was carried out in a WSR (well-stirred reactor). The new sampling tool like the temperature controlled filter system was introduced to minimize the condensation during sampling. The new analysis tools applied include the real time size distribution analysis with the Nano-DMA, particle size by transmission electron microscopy, C/H analysis, g filter analysis, and thermogravimetric analysis using both non-oxidative and oxidative pyrolysis. The WSR can generate young soot particles that can be collected and examined to gain insight into inception. For the current conditions, soot does not form for ${\Phi}$=1.9, inception occurs at or before ${\Phi}$=2.0, and inception combined with soot surface growth and/or coagulation occurs for ${\Phi}$=2.1. The filter samples for ${\Phi}$=1.9 are composed of volatile compounds that evolve at relatively low temperatures when heated in the presence or absence of O$_2$. The samples collected from the WSR at ${\Phi}$=2.0 and ${\Phi}$=2.1 are precursor-like in morphology and size. They have higher C/H ratios and lower organic percentages than precursor particles, but they are clearly not fully carbonized soot. The WSR PAH distribution is similar to that in young soot from inverse flames.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.396-396
• /
• 2009

Chalcopyrite semiconductor $CuInSe_2$ nanoparticles were prepared using a low temperature colloidal route by reacting the starting materials (CuI, $InI_3$ and $Na_2Se$) in solvents. After synthesised $CuInSe_2$ nanoparticles precursors were mixed with organic binder for the viscosity of the precursor slurry to be suitable for the doctor blade method. The mixture of $CuInSe_2$ and binder was deposited onto molybdenum-coated sodalime glass substrates to form thin film. The precursor thin films were preheated on the hot plate to remove remaining solvents and binder material. After subsequent thermal processing of the thin film under a selenium ambient, $CuInSe_2$ absorber layer with grain size significantly lager than that of the nanoparticles was formed.

• 한국분말재료학회지
• /
• 제27권5호
• /
• pp.394-400
• /
• 2020

Molybdenum trioxide (MoO₃) is used in various applications including sensors, photocatalysts, and batteries owing to its excellent ionic conductivity and thermal properties. It can also be used as a precursor in the hydrogen reduction process to obtain molybdenum metals. Control of the parameters governing the MoO₃ synthesis process is extremely important because the size and shape of MoO₃ in the reduction process affect the shape, size, and crystallization of Mo metal. In this study, we fabricated MoO₃ nanoparticles using a solution combustion synthesis (SCS) method that utilizes an organic additive, thereby controlling their morphology. The nucleation behavior and particle morphology were confirmed using ultraviolet-visible spectroscopy (UV-vis) and field emission scanning electron microscopy (FE-SEM). The concentration of the precursor (ammonium heptamolybdate tetrahydrate) was adjusted to be 0.1, 0.2, and 0.4 M. Depending on this concentration, different nucleation rates were obtained, thereby resulting in different particle morphologies.