• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.107-111
• /
• 2013

A new green-emitting material with donor-acceptor architecture, 3,7-bis(1'-phenylbenzimidazole-2'-yl)-10-phenylphenothiazine (BBPP) was synthesized and its thermal, optical, and electroluminescent characteristics were investigated. Organic light-emitting diodes (OLEDs) with four different multilayer structures were prepared using BBPP as an emitting layer. The optimized device with the structure of [ITO/2-TNATA (40 nm)/BBPP (30 nm)/TPBi (30 nm)/Alq3 (10 nm)/LiF (1 nm)/Al (100 nm)] exhibited efficient green emission. Enhanced charge carrier balance and electron mobility in the organic layers enabled the device to demonstrate a maximum luminance of 31,300 cd/$m^2$, a luminous efficiency of 6.83 cd/A, and an external quantum efficiency of 1.62% with the CIE 1931 chromaticity coordinates of (0.21, 0.53) at a current density of 100 mA/$cm^2$.

• 공업화학
• /
• 제16권6호
• /
• pp.755-759
• /
• 2005

본 연구는 유기EL의 기초연구로서, 특히 발광재료인 DPAVBi, AVBi 및 DPVBi를 Witting반응과 Wittig-Horner반응으로 합성했다. 이 반응은 Phosphorous ylide와 4-(디페닐아미노)벤즈알데히드, 9-안트라알데히드 및 벤조페논으로 행해졌다. 반응생성물의 구조적 특성은 FT-IR, 'H-NMR 스펙트로스코피로서 분석되었으며, 열적 안정성, 반응성 및 PL특성은 융점, 수득율 및 발광스펙트럼으로 각각 분석되었다. 순수한 DPAVBi, AVBi 및 DPVBi의 광전발광스펙트럼은 445 nm, 484 nm 및 450 nm 부근에서 각각 관찰되었다. 본 연구에 있어서 합성된 DPAVBi, AVBi 및 DPVBi는 알데히드, 케톤의 카르보닐기의 ${\alpha}$-위치의 안정성에 따라서 다른 반응특성을 나타냈다.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.543-547
• /
• 2005

Organic electroluminescence devices were made from 1,4-bis-(9-anthrylvinyl)benzene (AVB) and 1,4-bis-(9-aminoanthryl)benzene (AAB) anthracene derivatives. Device structure was ITO/AVB/PANI(EB)/Al (multi-layer device) and ITO/AAB:DCM/Al(single-layer device). In these devices, AVB, polyaniline(emeraldine base) (PANI(EB)) and AAB were used as the emitting material. 4-(dicyanomethylene)-2-methyl-6-p-(dimethylamino)styryl-4H -pyran(DCM) was used as red fluorescent dopant. We studied change of fluorescence wavelength with concentration of DCM doped in AAB. The ionization potential (IP) and optical band gap (Eg) were measured by cyclic voltammetry and UV-visible spectrum. We compared with difference of emitting wavelength between photoluminescence and electroluminescence spectrum. In case of the multi-layer device, PANI and AVB EL spectra have similar wave pattern to each PL spectrum and when PAM and AVB were used at the same time, and multi-layer device showed that a balanced recombination and radiation kom PANI and AVB. In case of the single-layer device, with the increase of DCM concentration, the blue emission decreases and red emission increases. This indicates that DCM was excited by the energy transfer from AAB to DCM or the direct recombination at the dopant sites due to carrier trapping, or both. The device with $1.0wt\%$ DCM concentration gave white light.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.437-443
• /
• 2000

In this study several lanthanide complexes such as Eu(TTA)$_3$(Phen), Tb(ACAC)$_3$-(Cl-Phen) were synthesized and the white-light electroluminescence(EL) characteristics of their thin films were investigated where the devices having structures of anode/TPD/Tb(ACAC)$_3$(Cl-Phen)/Eu(TTA)$_3$(Phen)/Alq$_3$or Bebq$_2$/cathode and the low work function metal alloy such as Li:Al was used as the electron injecting electrode(cathode). Device structure of glass substrate/ITO/TPD(30nm)/Tb(ACAC)$_3$(Phen)(30nm)/Eu(TTA)$_3$(Phen)(6nm)/DCM doped Alq$_3$(10nm)/Alq$_3$(20nm)/Li:Al(100nm) was also fabricated and their EL characteristics were investigated where Eu(TTA)$_3$(Phen) and DCM doped Alq$_3$were used as red light-emitting materials. It was found that the turn-on voltage of the device with non-doped Alq$_3$was lower than that of the devices with doped Alq$_3$and the blue and red light emission peaks due to TPD and Eu(TTA)$_3$(Phen) with non-doped Alq$_3$were lower than those with DCM doped Alq$_3$Details on the white-light-emitting characteristics of these device structures were explained by the energy and diagrams of various materials used in these structure where the energy levels of new materials such as ionization potential(IP) and electron affinity(EA) were measured by cyclic voltametric method.

• 폴리머
• /
• 제28권5호
• /
• pp.367-373
• /
• 2004

발광체로 페릴렌기와 전자 전달체로 트리아진기를 측쇄로 가지는 새로운 비공액계 청색 발광 공중 합체를 합성하였다. 제조한 공중합체는 클로로벤젠, THF 클로로포름, 벤젠과 같은 일반 유기 용매에 매우 잘 녹았다. 전도성 투명 전극 (ITO)/공중합체 /알루미늄으로 구성된 단층형 유기 발광 소자는 공중합체에서 트리아진의 함유량이 $30\%$일 때 캐리어 균형이 잘 맞았고 최고의 외부 양자 효율 ($0.003\%$)을 나타내었다. 특히 위에서 제작한 유기 발광 소자는 페릴렌 발광체에 상응하는 청색 발광 (479 nm)을 나타냈다. 구동 전압은 5V로 매우 낮았고, 색 좌표는 X 값이 0.16, Y 값이 0.17이었다.

• 대한화학회지
• /
• 제46권3호
• /
• pp.229-232
• /
• 2002

폴리아닐린에 전자주게기(-CH3)를 치환하여 전자효과(electronic effect) 와 입체장애효과(steric effect)를 확인하였다.1 폴리아닐린 유도체 폴리톨루이딘(POT)의 산화상태를 변화시키면서 ITO/POT/Al 구조의 유기발광소자를 제작하여 PL, I- V 특성 및 전기발광 특성을 확인하였다. 발광소자의 구동전압은 9∼14 V 이었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.579-581
• /
• 2004

A new DCM derivative containing the phenoxazine moiety (DCPXZ) has been synthesized for use as a red fluorescent dye molecule in organic light-emitting diodes (OLEDs). The photoluminescence and electroluminescence properties of DCPXZ were examined. The maximum photoluminescence of DCPXZ in chloroform solution ($10^{-5}$ mol) was observed at 616 nm. EL devices were fabricated with the structure ITO/PEDOT-PSS/Cu-PC(15nm)/${\alpha}$-NPD(45nm)/$Alq_3$:DCPXZ(30nm)/$Alq_3$(30nm)/LiF(0.5nm)/Al. The maximum EL emission for the 2.0% DCPXZ-doped device was at 608 nm with CIE coordinates (0.57, 0.42). The EL device exhibited a maximum brightness of 15,000 cd/$m^2$ at 19.4 V and a power efficiency of 1.04 lm/W at a luminance of 100 cd/$m^2$.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.418-422
• /
• 2009

We synthesized new electroluminescence materials [(1,10-phenanthroline)(8-hydroxyquinoline)] Zn(phen)q and investigated their electron transport properties. We used Zn(phen)q and $Alq_3$ for the conductive materials and measured their electron transport properties as a function of the organic layer thickness. The difference between Zn(phen)q and $Alq_3$ as electron transporting materials suggests that the electrical properties depends on the carrier injection.

• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.263-267
• /
• 2013

New random copolymers of phenylsilyl- and alkoxy-substituted phenylenevinylene, DMPS(9)-MEH(1)-PPV, DMPS(5)- MEH(5)-PPV and DMPS(1)-MEH(9)-PPV, have been synthesized by the Gilch dehydrohalogenation route, and the light-emitting properties of these polymers have been studied. The synthesized polymers were completely soluble in common organic solvents, and exhibited good thermal stability, almost up to $380^{\circ}C$. They showed UV-visible absorbance and photoluminescence (PL) in the ranges of 422-510 and 513-590 nm, respectively, according to their feed ratios. Electroluminescent devices were fabricated with these polymers as emitting layers, and ITO and Al as anode and cathode, respectively. DMPS(1)-MEH(9)-PPV, DMPS(5)-MEH(5)-PPV and DMPS(9)-MEH(1)-PPV exhibited EL emission maxima at 575 nm, 565 nm, and 541 nm, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1411-1413
• /
• 2008

We developed $Sn^{4+}$-porphyrin complexes that show thermally activated delayed fluorescence (TADF). TADF intensities increased with an increase of temperature because of an acceleration of the reverse intersystem crossing from triplet to singlet excited states by heat activation. TADF component provides a novel pathway for high efficiency OLEDs.