• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.664-674
• /
• 2016

The electrical properties of Ti/p-type InP Schottky diodes with and without polyaniline (PANI) interlayer was investigated using current-voltage (I-V) and capacitance-voltage (C-V) measurements. The barrier height of Ti/p-type InP Schottky diode with PANI interlayer was higher than that of the conventional Ti/p-type InP Schottky diode, implying that the organic interlayer influenced the space-charge region of the Ti/p-type InP Schottky junction. At higher voltages, the current transport was dominated by the trap free space-charge-limited current and trap-filled space-charge-limited current in Ti/p-type InP Schottky diode without and with PANI interlayer, respectively. The domination of trap filled space-charge-limited current in Ti/p-type InP Schottky diode with PANI interlayer could be associated with the traps originated from structural defects prevailing in organic PANI interlayer.

• 대한전자공학회논문지SD
• /
• 제47권6호
• /
• pp.7-12
• /
• 2010

유기물 쇼트기 다이오드 회로 설계시에 사용가능한 소자의 모델을 구현하였다. AHDL을 이용하여 상용 CAD 환경으로 보편적으로 사용되는 Spectre의 설계환경에서 측정 결과를 입력 파라미터로 반영하여 회로 시뮬레이션을 할 수 있는 환경을 구성하였다. 유기물 RFID의 구현에 필수적인 정류회로를 제작하여 회로의 주파수 특성을 측정하였으며, AHDL 모델을 사용한 시뮬레이션 결과와 비교하였다. 제작된 정류회로의 주파수 특성은 13.56MHz의 RFID 동작을 만족시키기에는 부족하지만, 135kHz 주파수 대역 RFID에서는 동작이 가능하다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1267-1270
• /
• 2006

Organic light-emitting diode (OLED) display panel with $64\;{\times}\;64$ pixels utilizing the charge-pump (CP) pixel addressing method was fabricated using conventional thin-film processes. Each pixel consists of a-Si:H Schottky diode and $ITO/SiO_2/ITO$ capacitor. It is shown that CP-OLED is technically feasible for information display and a driving voltage below $4V_{pp}$ is enough for nominal operation.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.379-381
• /
• 2000

Organic materials have potential advantages to be utilized as semiconductors in field effect transistors and light emmiting diodes. Gold, Aluminium, Silver, Chromium and Indium are used by electrodes. Gold is ohmic contact and the others are schottky contact. In this study, Pentacene and various electrode materials were deposited by Organic Molecular Beam Deposition (OMBD) and vacuum evaporation respectively. Those films were photolithographically patterned for measurements. These devices showed no degration after a 15 days of storage in laboratory environment.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1496-1506
• /
• 2018

Organic/inorganic ultraviolet photodetector was fabricated using thermal evaporation technique. Organic/inorganic heterojunction based on thermally evaporated copper (II) acetylacetonate thin film of thickness 200 nm deposited on an n-type silicon substrate is introduced. I-V characteristics of the fabricated heterojunction were investigated under UV illumination of intensity $65mW/cm^2$. The diode parameters such as ideality factor, n, barrier height, ${\Phi}_B$, and reverse saturation current, $I_s$, were determined using thermionic emission theory. The series resistance of the fabricated diode was determined using modified Nord's method. The estimated values of series resistance and barrier height of the diode were about $0.33K{\Omega}$ and 0.72 eV, respectively. The fabricated photodetector exhibited a responsivity and specific detectivity about 9 mA/W and $4.6{\times}10^9$ Jones, respectively. The response behavior of the fabricated photodetector was analyzed through ON-OFF switching behavior. The estimated values of rise and fall time of the present architecture under UV illumination were about 199 ms and 154 ms, respectively. Finally, enhancing the photoresponsivity of the fabricated photodetector, post-deposition plasma treatment process was employed. A remarkable modification of the device performance was noticed as a result of plasma treatment. These modifications are representative in a decrease of series resistance and an increase of photoresponsivity and specific detectivity. The process of plasma treatment achieved an increment of external quantum efficiency from 5.53% to 8.34% at -3.5 V under UV illumination.

• Journal of Information Display
• /
• 제7권1호
• /
• pp.35-40
• /
• 2006

Organic light-emitting diode (OLED) display panel using the charge-pump (CP) pixel addressing scheme was fabricated, and the results show that it is applicable for information display. A CP-OLED panel with 64 ${\times}$ 64 pixels consisting of thin-film capacitors and amorphous silicon Schottky diodes was fabricated using conventional thin-film processes. The pixel drive circuit passes electrical current into the OLED cell during most of the frame period as in the thin-film transistor (TFT)-based active-matrix (AM) OLED displays. In this study, the panel was operated at a voltage level of below 4 V, and this operation voltage can be reduced by eliminating the overlap capacitance between the column bus line and the common electrode.