• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.637-646
• /
• 2012

Recently, Wireless Sensor Networks (WSNs) are used in many applications. When sensor nodes are deployed on special areas, where humans have any difficulties to get in, the nodes form network topology themselves. By using the sensor nodes, users are able to obtain environmental information. Due to the lack of the battery capability, sensor nodes should be efficiently managed with energy consumption in WSNs. In specific applications (e.g. in intrusion detections), intruders tend to occur unexpectedly. For the energy efficiency in the applications, an appropriate algorithm is strongly required. In this paper, we propose tree-based routing algorithm for the specific applications, which based on the intrusion detection. In addition, In order to decrease traffic density, the proposed algorithm provides enhanced method considering link cost and load balance, and it establishes efficient links amongst the sensor nodes. Simultaneously, by using the proposed scheme, parent and child nodes are (re-)defined. Furthermore, efficient routing table management facilitates to improve energy efficiency especially in the limited power source. In order to apply a realistic military environment, in this paper, we design three scenarios according to an intruder's moving direction; (1) the intruder is passing along a path where sensor nodes have been already deployed. (2) the intruders are crossing the path. (3) the intruders, who are moving as (1)'s scenario, are certainly deviating from the middle of the path. In conclusion, through the simulation results, we obtain the performance results in terms of latency and energy consumption, and analyze them. Finally, we validate our algorithm is highly able to adapt on such the application environments.

• (The)Study of the Eastern Classic
• /
• no.50
• /
• pp.295-318
• /
• 2013

The purpose of this study was to define the 'caligraphy as a modern concept of art. For this purpose, it was necessary to exclude the elements betraying 'the caligraphy as a pure art' in reference to 'autonomy' as an indicator of modernity in order to reflect on the current topology of the caligraphy in our age. Checking the current conditions facing the caligraphy from the pre-modern, modern and post-modern perspectives will clarify the current topology of the caligraphy and further exploring 'the caligraphy as a post-modern art concept. To this end, this study defines the caligraphy 'as a pure formative art' and thereby discusses it in terms of nature and form. In terms of nature, the caligraphy should be subsumed into a spacial art, but it has a nature of a temporal art created and appreciated over time. Hence, among the spacial arts, the painting is most similar to the caligraphy, while among the temporal arts, the caligraphy is most similar to such rhythmic (of high mobility) or performing arts as music and dance. Merely, the painting does not reveal the flow of time on the canvas, while music and dance leave no residual in terms of audibility and visuality. All in all, the caligraphy is sort of 'temporal-spacial art' like dance in that the visible letters express the artist's sense of life on the plane over time like music. In terms of form, this study compares the caligraphy with engraving, wood print and character design to define the caligraphy as a pure art concept. The caligraphy as a modern art concept, namely, the autonomy of the caligraphy is associated with legibility and meaning in addition to the question whether it is an applied or a pure art. The legibility and meaning of the characters are not only the essential elements of the caligraphy but also are the factors limiting its autonomy, which must be a paradox. All in all, the legibility and meaning of the characters must be the key criteria for determining the caligraphy as a practical art or literary art or as a pure figurative art. In this context, this study discusses the caligraphy as a pure art by comparing it with the spatial art 'painting' and the temporal art 'music.' It might be impossible to define the caligraphy or a genre of art as an autonomous art of self-perfection and categorical identity. Moreover, any attempt to define the caligraphy would fail to interpret the caligraphy appropriately. Merely, we are obliged to position the caligraphy in the process of localizing 'their modernity' and thereby, discuss how to respond to their scheme.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2012

In the three-phase power system using the three-phase motor, when any one-phase is open-phase, the unbalanced current flows and the single-phase power supplied by power supply produces overcurrent to motor coil. As a result, the enormous damage and electrical fire can be given to the power system. Recently, the thermal over-current relay (THR) or electronic motor protection relay (EMPR) is mostly used as the open-phase detection device of the three-phase motor. When the over-current or overheat of electric line is generated, it detects and operates circuit breaker, but there is the defect that the sensing speed is slow, the operation can be sometimes failed, and the precision is decreased. In order to improve these problems, this paper is proposed a new control circuit topology for openphase protection using semiconductor devices. Therefore, the proposed open-phase protection device (OPPD) enhances the sensing speed and precision, and has the advantage of simple fitting in the three-phase motor control panel in the field, as it manufactures into small size and light weight. As a result, the proposed OPPD protects the three-phase motor, minimizes the electrical fire from openphase, and contributes for the stable driving of the power system. The performance and confidence of the proposed OPPD is confirmed by a great variety of the experiments of operation characteristic.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.11
• /
• pp.1064-1073
• /
• 2013

In this paper, a compact 370 W high efficiency GaN(Gallium Nitride) HEMT(High Electron Mobility Transistor) power amplifier(PA) using internal harmonic manipulation circuits is presented for cellular and L-band. We employed a new circuit topology for simultaneous high efficiency matching at both fundamental and 2nd harmonic frequency. In order to minimize package size, new 41.8 mm GaN HEMT and two MOS(Metal Oxide Semiconductor) capacitors are internally matched and combined package size $10.16{\times}10.16{\times}1.5Tmm^3$ through package material changes and wire bonded in a new package to improve thermal resistance. When drain biased at 48 V, the developed GaN HEMT power amplifier has achieved over 80 % Drain Efficiency(DE) from 770~870 MHz and 75 % DE at 1,805~1,880 MHz with 370 W peak output power(Psat.). This is the state-of-the-art efficiency and output power of GaN HEMT power amplifier at cellular and L-band to the best of our knowledge.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.777-781
• /
• 2004

This paper presents an algorithm for multichannel slotted-ring topology medium access protocol (MAC) using in wavelength division multiplexing (WDM) networks. In multichannel ring, there are two main previously proposed architectures: Tunable Transmitter - Fixed Receiver (TTFR) and Fixed Transmitter - Tunable Receivers (FTTR). With TTFR, nodes can only receive packets on a fixed wavelength and can send packets on any wavelengths related to destination of packets. Disadvantage of this architecture is required as many wavelengths as there are nodes in the network. This is clearly a scalability limitation. In contrast, FTTR architecture has advantage that the number of nodes can be much larger than the number of wavelength. Source nodes send packet on a fixed channel (or wavelength) and destination nodes can received packets on any wavelength. If there are fewer wavelengths than there are nodes in the network, the nodes will also have to share all the wavelengths available for transmission. However the fixed wavelength approach of TTFR and FTTR bring low network utilization. Because source node with waiting data have to wait for an incoming empty slot on corresponding wavelength. Therefore this paper presents Tunable Transmitter - Tunable Receiver (TTTR) approach, in which the transmitting node can send a packet over any wavelengths and the receiving node can receive a packet from any wavelengths. Moreover, the self-similar distributed input traffic is used for evaluation of the performance of the proposed algorithm. The self-similar traffic performs better performance over long duration than short duration of the Poison distribution. In order to increase bandwidth efficiency, the Destination Stripping approach is used to mark the slot which has already reached the desired destination as an empty slot immediately at the destination node, so the slot does not need to go back to the source node to be marked as an empty slot as in the Source Stripping approach. MATLAB simulator is used to evaluate performance of FTTR, TTFR, and TTTR over 4 and 16 nodes ring network. From the simulation result, it is clear that the proposed algorithm overcomes higher network utilization and average throughput per node, and reduces the average queuing delay. With future works, mathematical analysis of those algorithms will be the main research topic.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1404-1411
• /
• 2016

Network virtualization is a technique that abstracts the physical network to provide multiple virtual networks to users. Virtualized network has the advantage to offer flexible services and improve resource utilization. In SDN architecture, network hypervisor serves to virtualize the network through address virtualization, topology virtualization and policy virtualization. Among them, address virtualization refers to the technique that provides an independent address space for each virtual network. Previous work divided the physical address space, and assigned an individual division to each virtual network. Each virtual address is then mapped one-to-one to a physical address. However, this approach requires a lot of flow entries, thus making it disadvantageous. Since SDN switches use TCAM (Ternary Contents Addressable Memory) for the flow table, it is very important to reduce the number of flow entries in the aspect of cost and scalability. In this paper, we propose a LISP based address virtualization, which separates address spaces for the physical and virtual addresses and transmits packet through tunneling, in order to resolve the limitation of the previous studies. By implementing a prototype, we show that the proposed scheme provides better scalability.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.229-238
• /
• 2007

Sensor networks consist of many tiny sensor nodes that collaborate among themselves to collect, process, analyze, and disseminate data. In sensor networks, sensor nodes are typically powered by batteries, and have limited computing resources. Moreover, the redeployment of nodes by energy exhaustion or their movement makes network topology change dynamically. These features incur problems that do not appear in traditional, wired networks. Security in sensor networks is challenging problem due to the nature of wireless communication and the lack of resources. Several efforts are underway to provide security services in sensor networks, but most of them are preventive approaches based on cryptography. However, sensor nodes are extremely vulnerable to capture or key compromise. To ensure the security of the network, it is critical to develop suity mechanisms that can survive malicious attacks from "insiders" who have access to the keying materials or the full control of some nodes. In order to protect against insider attacks, it is necessary to understand how an insider can attack a sensor network. Several attacks have been discussed in the literature. However, insider attacks in general have not been thoroughly studied and verified. In this paper, we study the insider attacks against routing protocols in sensor networks using the Ad-hoc On-Demand Distance Vector (AODV) protocol. We identify the goals of attack, and then study how to achieve these goals by modifying of the routing messages. Finally, with the simulation we study how an attacker affects the sensor networks. After we understand the features of inside attacker, we propose a detect mechanism using hop count information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.29-36
• /
• 2009

In this paper, the design and implementation of LNA and down-mixer using 90 nm CMOS process are presented for 60 GHz band WPAN receiver. In order to extract characteristics of the transistor used to design each elements under the optimum bias conditions, the S-parameter of the manufactured cascode topology was measured and the effect of the RF pad was removed. Measured results of 3-stages cascode type LNA the gain of 25 dB and noise figure of 7 dB. Balanced type down-mixer with a balun at LO input port shows the conversion gain of 12.5 dB within IF frequency($8.5{\sim}11.5\;GHz$) and input PldB of -7 dBm. The size and power consumption of LNA and down-mixer are $0.8{\times}0.6\;mm^2$, 43 mW and $0.85{\times}0.85\;mm^2$, 1.2 mW, respectively.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.70-80
• /
• 2018

Due to the recent development of social media and mobile devices, graph data have been using in various fields. In addition, caching techniques for reducing I/O costs in the process of large capacity graph data have been studied. In this paper, we propose a multi-layer caching scheme considering the connectivity of the graph, which is the characteristics of the graph topology, and the history of the past subgraph usage. The proposed scheme divides a cache into Used Data Cache and Prefetched Cache. The Used Data Cache maintains data by weights according to the frequently used sub-graph patterns. The Prefetched Cache maintains the neighbor data of the recently used data that are not used. In order to extract the graph patterns, their past history information is used. Since the frequently used sub-graphs have high probabilities to be reused, they are cached. It uses a strategy to replace new data with less likely data to be used if the memory is full. Through the performance evaluation, we prove that the proposed caching scheme is superior to the existing cache management scheme.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.53-64
• /
• 2009

Inter-vehicular communication that propagates information without infrastructures has drawn a lot of interest. However, it is difficult to apply conventional ad-hoc routing protocols directly in inter-vehicular communication due to frequent changes in the network topology caused by high mobility of the vehicles. MMFP(Multi-hop MAC Forwarding) is a unicast forwarding protocol that transport packets based on the reachability information instead of path selection or position information. However, delivering public safety messages informing road conditions such as collision, obstacles and fog through inter-vehicular communication requires broadcast rather than unicast since these messages contain information valuable to most drivers within a close proximity. Flooding is one of the simplest methods for multi-hop broadcast, but it suffers from reduced packet delivery-ratio and high transmission delay due to an excessive number of duplicated packets. This paper presents two multi-hop broadcast protocols for inter-vehicular communication that extend the MMFP. UMHB(Unreliable Multi-Hop Broadcast) mitigates the duplicated packets of MMFP by limiting the number of nodes to rebroadcast packets. UMHB, however, still suffers from low delivery ratio. RMHB(Reliable Multi-Hop Broadcast) uses acknowledgement and retransmission in order to improve the reliability of UMHB at the cost of increase in transmission delay, which we show through simulation is within an acceptable range for collision avoidance application.