• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.344-354
• /
• 2009

Side scan sonar using acoustic wave plays a very important role in the underwater, sea floor, and shallow marine geologic survey. In this study, we have acquired side scan sonar data for the underwater man-made structures, artificial reefs and fishing grounds, installed and distributed in the survey area. We applied digital image processing techniques to side scan sonar data in order to improve and enhance an image quality. We carried out digital image processing with various kinds of filtering in spatial domain and frequency domain. We tested filtering parameters such as kernel size, differential operator, and statistical value. We could easily estimate the conditions, distribution and environment of artificial structures through the interpretation of side scan sonar.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1029-1032
• /
• 1998

In this paper, a comparative study is presented to evaluate the addition architecture of the high-speed checksum module in TCP/IP processing. In order to speed up TCP/IP processing, H/W implementation offers concurrent and parallel processing to yield high speed computation, with respect to S/W implementation. This research aims at comparing two addition architectures of checksum module, which is the major botteleneck in TCP/IP processing. The 16-bit and 8-bit byte-by-byte addition architecture are implemented by the full custom design, and compared, in analytical and experimental manner, from standpoint of space and performance. For LG $0.6\mu\textrm{m}$ TLM process, the 8-bit addition implementation requires the area, 1.3 times larger than the 16-bit one, and it operates at 80MHz while the 16-bit one runs by 66MHz.

• Journal of Biomedical Engineering Research
• /
• v.22 no.3
• /
• pp.285-291
• /
• 2001

In this paper, we designed two preprocessing adaptive filter - high pass filter and notch filter - using FPGA. For minimizing the calculation load of multi-channel and high-resolution ECG system, we utilize FPGA rather than digital signal processing chip. To implement the designed filters in FPGA, we utilize FPGA design tool(Altera corporation, MAX-PLUS II) and CSE database as test data. In order to evaluate the performance in terms of processing time, we compared the designed filters with the digital filters implemented by ADSP21061(Analog Devices). As a result, the filters implemented by FPGA showed better performance than the filters based on ADSP21061. As a consequence of examination, we conclude that FPGA is a useful solution in multi-channel and high-resolution signal processing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.4
• /
• pp.1-7
• /
• 1998

This paper describes a meshless of element-free method based on fuzzy knowledge processing. To efficiently simulate complicated physical phenomena with dynmics and non-linear ploblem using computational mechanics, special method is required such as parallel processing or adaptive analysis techniques. However, the conventional finite element method is too complicated to be employed in the above cases. In order to reduce the above complexity of the conventional finite element analysis systms, the so called meshles finite elements as an input information have been stuided. Node is generated if its distance form existing node points is similar to the node spacing fuction at the point. The node spacing function is well controlled by the fuzzy knowledge processing Practical performances of the present system are demonstrated through several three-dimensional(3D) problems.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.89-95
• /
• 2003

This research analyzes the cutting mechanism of A1100-H18 of commercially pure aluminum by image processing in SEM(Scanning Electron Microscope) for the measurement of strain rate distribution near a cutting edge in orthogonal micro-cutting. The distribution is measured using various methods in order. The methods are in-situ observations of cutting process in SEM, inputting image data, a computer image processing, calculating displacements by SSDA(Sequential Similarity Detection Algorithm) and calculating strain rates by FEM. The min results obtained are as follows: (1)It enables to measure a microscopic displacement near a cutting edge. (2) An application of this system to cutting process of various materials will help to make cutting mechanism clear.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.98-102
• /
• 2009

Almost all injection molds have multi-cavity runner system for mass production, which are designed with geometrically balanced runner system in order to accomplish filling balance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalance has been observed. Filling imbalance could be decreased by modifying processing conditions such as injections rate, mold temperature, injection pressure, melt temperature that are related to shear, viscosity. In this study, a series of experiment was conducted to investigate filling imbalance variation when modifying runner layout and polymer and to determine which processing condition influences as the primary cause of filling imbalance in geometrically balanced runner system. The filling imbalance was decreased up to result range of $3{\leq}DFI{\leq}8(%)$ by using a new runner system for balanced filling.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.101-106
• /
• 2005

It needs to accumulate a store of know-how on the design, precision processing and appraisement for metering pump which is a kind of gear pump fer synthetic fibers. But the period and cost fur development is not effective, because designers experience many trial and error for the pump design and manufacturing process. Therefore, in order to curtail the period and cut down expenses, the analysis and simulation system is required for a designed metering pump. In this study, the pump simulation software was developed with the visual C++ language and the image processing algorithm, and was investigated through a discharge test for the planetary gear type metering pump.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.69-71
• /
• 2005

Earthquake disaster frequently happens in Shizuoka Prefecture and it is commonly predicted that a giant earthquake(Tokai Earthquake) could occur in the near future. When a giant earthquake happens, extensive damage of lifelines will be expected. It is considered that the collection of damage information and the establishment of a communication network system are very important in order to restore lifelines quickly. And geographic information system(GIS) might playa very important role to grasp the spatial information of lifeline damage in a natural disaster. The authors' group had a research project to study a lifeline restoration support system with image processing and ad hoc networking in a natural disaster. The objectives of this presentation are to introduce our project and to show some results of our study. The authors finally constructed the GIS for the integration of damage information acquired by image processing and ad hoc networking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1327-1335
• /
• 2011

XML is good at representing data with hierarchical and self-describing structure. There is no inherent semantics with XML. However, semantics of XML has come up with us as XML is used in wide and advanced applications. This paper surveyed semantics in XML data processing environment. XML semantics can be categorized into four groups according to its usage; structural semantics, relational semantics, extended semantics, and semantic web. Relational database is still a good alternative for storing and managing large volume of XML documents. We propose an extended relational semantics in order to exploit it in managing XML documents such as query processing.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.97-105
• /
• 1998

The fiber oriented condition inside fiber reinforced composite material is a basic factor of mechanical properties of composite materials. It is very important to meausure the fiber orientation angle for the determination of molding conditions, mechanical characteristics, and the design of composite materials. In the work, the fiber orientation distribution of simulation figure plotted by PC is measured using image processing in order to examine the accuracy of intersection counting method. The fiber orientation function measured by intersection counting method using image processing is compared with the calculated fiber orientation function. The results show that the measured value of fiber orientation function using intersection counting method is lower than the calculated value, because the number of intersection between the scanning line and the fiber with smaller fiber aspect ratio is counted less than with larger fiber aspect ratio.