• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.170-172
• /
• 2007

본 논문은 optocoupler를 사용하여 궤환단을 절연한 오프라인 플라이백 변환기의 설계와 해석에 중점적인 목적을 두었으며, 부가적으로 궤환단을 절연하지 않은 구조를 가지는 전류모드제어 플라이백변환기와 optocoupler로 궤환단을 절연한 구조를 가지는 전류모드제어 플라이백 변환기의 상관관계를 분석하였다. 설계와 해석을 하기 위해 PSIM 시뮬레이터를 사용하여 PSIM 모델을 제시하였으며, 제시한 PSIM 모델은 110$\sim$220V 오프라인 전원을 입력하여 10V/5A의 출력을 가지는 50W 오프라인 전류모드 플라이백 변환기의 설계와 실험을 통하여 높은 정확성과 사용의 용이성을 확인하였다.

• 문화기술의 융합
• /
• 제4권4호
• /
• pp.379-385
• /
• 2018

본 논문은 절연된 환경에서 멀티채널 아날로그 신호의 정확하고 안전한 전송을 위해 옵토커플러를 활용한 신호의 전송과 절연에 대해 다룬다. 신호의 전송 과정에서 절연 소자의 온도 의존성과 비선형성에 의한 신호의 왜곡을 최소화하고 우수한 잡음 여유도를 확보하기 위해 디지털 절연을 이용한 디지털 전송을 연구한다. 옵토커플러를 적용한 디지털 전송에 대한 이론적 고찰을 토대로 멀티채널 아날로그 신호의 전송 회로를 제안하였고 디지털 데이터의 직렬 전송 프레임도 설계하였다. 이론적 고찰과 일치하는 실험 결과를 통하여 제안하는 회로와 구현된 프로그램이 절연 장벽을 극복하고 멀티채널 아날로그 신호를 정확히 전송할 수 있음을 증명하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.227-228
• /
• 2015

본 논문에서는 Optocoupler 절연형 오프라인 플라이백 변환기 궤환 단의 직류 바이어스 해석 기법을 제안한다. 직류 바이어스 해석을 통해 목표한 Current Transfer Ratio(CTR)를 얻고 Junction Capacitance($C_j$)를 측정하여 제어기 설계에 적용시켜 안정도 및 성능을 측정하였다. NCP1230, PC817, TL431 IC를 이용하여 플라이백 변환기의 제어회로를 제작하였고, 시뮬레이션을 이용해 직류 바이어스 해석 기법의 타당성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.294-297
• /
• 2002

We investigate the dynamics of a non-autonomous chaotic oscillator including an optocoupler that shows a periode-doubling and a chaos dynamics under any conditions of input circuit via experiments. Its characteristics was found to coincide input frequency components with output's. But, the relationship between input signals and output signals is different according to the amplitude of driving input voltage and circuit structure. Thus, this result can be applied to a wide variety of optical systems in the future.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.74-77
• /
• 2011

PSPICE modeling of a commercial LED driver IC (TOP245P) and PC817A optocoupler is proposed for the switch-mode power supply (SMPS) (applicable to LED driver) design and simulation. An analog behavioral model of the TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The empirical equation of PC817A current transfer ratio (CTR) is fitted from the datasheet of PC817A. Two types of SMPSs are simulated with the averaged-model and switching-model. The simulation results by the proposed PSPICE models are in good agreement with those in the data sheet and an experimental data.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.580-583
• /
• 2009

This paper introduces a gate drive IC for power modules with shoot-through immunity. A new approach uses a bootstrap diode as a high-side voltage bias and a level shift function at the same time. Therefore, the gate drive circuit becomes a simple and low-cost without conventional level shift functions such as HVIC(High-Voltage IC), optocoupler and transformer. The proposed gate drive IC is designed and fabricated using the Dongbu-Hitek's 0.35um BD350BA process. It has been tested and verified with IGBT modules.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.81-82
• /
• 2009

This paper introduces a gate drive IC for power modules with shoot-through immunity. A new approach uses a bootstrap diode as a high-side voltage bias and a level shift function at the same time. Therefore, the gate drive circuit becomes a simple and low-cost without conventional level shift functions such as HVIC(High-Voltage IC), optocoupler and transformer. The proposed gate drive IC is designed and fabricated using the Dongbu-Hitek's 0.35um BD350BA process. It has been tested and verified with IGBT modules.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.313-316
• /
• 2002

A SRM inverter has very low switching frequency. This results in reducing the burden for a high-speed of the gate-amp interface circuit. and the linearity of optocoupler is used to protect the intanteneous peak current for the stable operation In this paper, series resistor is used to equal the current sharing of each switching device and a linear gate-amp is proposed to protect the intanteneous peak current which occurs in transient state.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권6호
• /
• pp.359-367
• /
• 2004

The switched reluctance motor(SRM) has considerable potential for industrial applications because of its high result lily as a result of the absence of rotor windings. In some applications with SRM, paralleling strategy is often used for cost saving, increasing of current capacity and system reliability. A SRM inverter has very low ,switching frequency. This results in reducing the burden for a high-speed of the gate-amp interface circuit. and the linearity of optocoupler is used to protect the instantaneous peak current for the stable operation. In this paper, series resistor is used to equal the current sharing of each switching device and a linear gate-amp is proposed to protect the instantaneous peak current which occurs in transient state. The proposed paralleling strategy is verified by experimental results.

• ETRI Journal
• /
• 제41권1호
• /
• pp.124-132
• /
• 2019

The energy balance (EB) model of a primary side regulation (PSR) fly-back converter in the discontinuous conduction mode (DCM) is discussed in this paper. Based on this EB model, the stability of a PSR fly-back converter in the pulse skipping mode (PSM) is analyzed, and a self-adapting modulation factor control strategy is proposed. Theoretical analysis and simulation results show that by saving an optocoupler and correlative circuits, which are necessary in traditional PSM fly-back converters, the modulation factor tolerance controlled by this method is 1.26% on average, corresponding to the ideal value. Compared with traditional fly-back PSM controllers, the power saved in the sampler/comparator modules is 87% on average for a load range of $1{\Omega}$ to $1k{\Omega}$.