• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1037-1040
• /
• 1999

This paper investigates a RBF(Radial Basis Function) equalizer for channel equalization. RBF network has an identical structure to the optimal Bayesian symbol-decision equalizer solution. Therefore RBF can be employed to implement the Bayesian equalizer. Proposed algorithm of this paper makes channel states estimation to be unncessary, also makes center number which is needed indivisual channel to be minimum. Bayesian Equalizer has the theorical optimum performance. Proposed Equalizer performance is compared with this Baysian equalizer performance.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.38-41
• /
• 2000

This is the continued paper as part 2 in this study. In order to prevent the production defects, the optimum design of product, fixtures and their making are very significant division. Especially the result of modelling and its analysis become the characteristics of this paper that nothing might be over seen before such as this type of research method on all processes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.240-245
• /
• 1990

A on-line optimization scheme based on model in a binary distillation process is proposed. A reduced-order model utilized the concept of collocation is used as a process model and the recursive prediction error method is employed to identify the reduced-order model. The concentrations of end products are controlled by nonlinear adaptive predictive control algorithm. The objective function is constructed to find optimum operate condition for saving utility cost. The proposed optimization is scheme is tested through simulation studies in 13-staged water-methanol distillation column.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.157-162
• /
• 1991

본 연구에서는 적응 whitening 필터를 이용하여 최적 레이다 신호처리기를 구현하였다. 사용된 필터는 Gram-Schmidt와 lattice 구조를 가지며, 이들을 이용하여 레이다 clutter를 제거하고, 프로세서 특성을 원하는 표적신호에 일치시킨다. 또한 필터 계수들을 변화하는 레이다 환경에 따라 조정하기 위하여 여러 가지 적응 알고리듬을 적용하였다. 실험결과 구현된 시스템은 빠른 수렴 특성을 갖고 있으며, 역행렬 연산이 필요없기 때문에 향상 안정된 특성을 보임을 알 수 있다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.1-7
• /
• 1992

This paper discusses the self-adaptive equalization technique which has adaptibility to channel characteristics varation without training sequence. The criterion function used in this paper is based on the concept of cumulant matching. This function can be applied to nonminimum phase channel, and we can verify the fact that if the constrained condition is satisfied. this criterion has no local optimum. As the adaption algorithm, the normalized gradient-searching technique is used. Simulations verify the performance of our method in case of 8PAM, 8PSK(CCITT V.27), 16QAM(CCITT V.29) sources and three type nonminimum phase channels.

• The KIPS Transactions:PartC
• /
• v.14C no.5
• /
• pp.425-430
• /
• 2007

Without the aid of stationary infrastructure, maintaining routing information for all nodes is inefficient in the Mobile Ad hoc Networks(MANET). It is more efficient when every time routing information is necessary that the source node broadcasts a query message to neighbour nodes. The source node using Ad hoc On-Demand distance Vector(AODV), which is one of the routing protocols of MANET, uses the Expanding Ring Search(ERS) algorithm which finds a destination node efficiently. In order to reduce the congestion of the network, ERS algorithm does not broadcast Route REQuest(RREQ) messages in the whole network. When the timer expires, if source node does not receive Route REPly(RREP) messages from the destination node, it gradually increases TTL value and broadcasts RREQ messages. Existing AODV cost a great deal to find a destination node because it uses a fixed NODE_TRAVERSAL_TIME value. Without the message which is added in existing AODV protocols, this paper measures delay time among the neighbours' nodes by making use of HELLO messages. We propose Adaptive ERS(AERS) algorithm that makes NET_TRAVERSAL_TIME optimum which apply to the measured delay time to NODE_TRAVERSAL_TIME. AERS suppresses the unnecessary messages, making NET_TRAVERSAL_TIME optimum in this paper. So we will be able to improve a network performance. We prove the effectiveness of the proposed method through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2708-2715
• /
• 2012

This paper proposes a new sensorless speed control scheme of induction motor using Model Reference Adaptive Control and Direct Torque Control System. The Model Reference Adaptive Control System is based on the comparison between the outputs of Reference Model and Adjustable Model. The error between the estimated quantities obtained by the two models is used to drive a suitable adaptation mechanism which generates the estimated rotor speed for the Adjustable Model. And the Direct Torque Control scheme controls torque and flux by restricting the flux and torque errors within respective hysteresis bands, and motor torque and flux are controlled by the stator voltage space vector using optimum inverter switching table. The simulation results of proposed method indicate good speed responses from the low speed range to the high, and also show favorable characteristics of load operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.261-270
• /
• 2007

The Delay Threshold-based Priority Queueing (DTPQ) scheme has been shown useful for scheduling both real-time (RT) and non-real-time (NRT) service traffic in mobile broadband wireless access (MBWA) systems. The overall system capacity can be maximized subject to their QoS requirement by the DTPQ scheme, which takes the urgency of the RT service into account only when their head-of-line (HOL) packet delays exceed a given delay threshold. In practice, the optimum delay threshold must be configured under the varying service scenarios and a corresponding traffic load, e.g., the number of RT and NRTusers in the system. In this paper, we propose an adaptive version of DTPQ scheme, which updates the delay threshold by taking the urgency and channel conditions of RT service users into account. By evaluating the proposed approach in an orthogonal frequency division multiple access/time division duplex (OFDM/TDD)-based broadband mobile access system, it has been found that our adaptive scheme significantly improves the system capacity as compared to the existing DTPQ scheme with a fixed delay threshold.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.195-202
• /
• 2005

An adaptive segmentation algorithm is used to efficiently target decisions in local non-stationary images. Until now, several adaptive approaches have been proposed as a method of segmentation. However, they can't be directly used for radar target detection because a radar signal has different characteristics from general images. Generally, a histogram of radar signal shows that targets have a relatively small number of frequency functions compared to the background and distribution of background, which have several shapes as the environment changes. In this paper, we propose an adaptive segmentation algorithm using a histogram chord which is a right-down line from maximum pick of frequency function. The proposed method provides thresholds which are optimum for several radar environments because the used chord for threshold search is not significantly effected by interference conditions. Simulation results show that the proposed method is superior to the traditional algorithms, global threshold method and distribution median method, with respect to detection performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.995-1006
• /
• 2003

It is well know that in the wireless communication systems the transmitted signals can suffer from multipath fading due to the wave propagation characteristics and the obstacles over the paths, resulting in serious reduction in the power of the received signals. However, it is possible to take advantage of the inherent diversity imposed in the multipath reception if the underlying channel can be properly estimated. One of the diversity reception methods in this case is Rake processing. In this paper we study the Rake receivers for the direct-sequence spread-spectrum communication systems utilizing PN (pseudo noise) sequences to achieve spread spectrum. A conventional Rake receiver can use the finite-duration impulse (FIR) filter followed by the PN sequence demodulator, where the FIR filter coefficients are the reverse-ordered complex conjugate values of the fading channel impulse response estimates. Here, we propose a new Rake processing method by replacing the aforementioned PN code sequence with a new set of optimum demodulator coefficients. More specifically, the concept of the new optimum Rake processing is first introduced and then the optimum demodulator coefficients are theoretically derived. The performance obtained using the new optimum Rake processing is also calculated. The analytical results are verified by computer simulation. As a result, it is shown that the new optimum Rake processing method improves the MSE performance more than 10 dB over the conventional one using the fixed PN sequence demodulator. It is also shown that the new optimum Rake processing method improves the MSE performance about 10 dB over the Adaptive Correlator that performs the combining of the multipath components and PN demodulation concurrently. And finally, the MSE performance of the optimum Rake demodulator is very close to the MSE performance of OPSK demodulator under the AWGN channel.