• 한국수산과학회지
• /
• 제17권3호
• /
• pp.197-205
• /
• 1984

열대산 메기 Clarias batrachus를 새로운 양식어종으로 만들기 위한 기초연구의 하나로 이 종의 성장적수온 및 월동을 위한 성장가능최저수온과 저수온에서의 사치가 시작되는 수온을 찾기 위해 1981년3월부터 1982년 3월까지 체중 $12{\sim}40g$사이의 1년생으로서 $14^{\circ}C$에서 $34^{\circ}C$사이의 수온에서 일련의 실험을 실시하여 다음의 결과를 얻었다. 이 종의 약 12g에서 28g사이의 것의 성장적정수온은 약 $25^{\circ}C$로 나타났고 이 수온에서는 이보다 높거나 낮은 수온에서보다 성장과 사료섭취량, 그리고 사료효율면에서 가장 좋은 결과가 나왔다. 성장최저한계수온은 $18^{\circ}C$로 나타났으며 62일간의 실험에서 1일성장률은 약 $0.1\%$로 낮았으나 폐사는 없었고 활동도 비교적 활발하였다. 따라서 이 종의 월동가능최저수온은 $18^{\circ}C$로 사료된다. $16^{\circ}C$또는 이보다 약간 낮은 수온에서 방치하면 약 30일내에 대부분 폐사하며 $14^{\circ}C$이하에서는 $1{\sim}7$일 내에 모두 폐사하였다. 따라서 이 종에 있어서 폐사가 시작되는 수온은 $16^{\circ}C$로 사료된다. 성장가능최저수온 근처에서 장기간사육할 경우 급작스런 수온하강, 특히 $15^{\circ}C$이하로 내려가는 경우 전체 어류에 치명적인 피해가 예상되므로 주의하지 않으면 안될 것으로 사료된다.

• 원예과학기술지
• /
• 제34권4호
• /
• pp.557-563
• /
• 2016

To improve the germination of Spiraea fritschiana seeds for mass propagation, we evaluated the effect of a range of temperatures, cold stratification periods, and gibberellic acid ($GA_3$) treatments on three germination characteristics. Final germination percentage (FGP) increased as the temperature for seed germination increased, up to $30^{\circ}C$, while the mean germination time (MGT) and the mean number of days to 30% germination ($T_{30}$) decreased when seeds were germinated at $25-30^{\circ}C$. The optimum germination temperature of S. fritschiana seeds is approximately $30^{\circ}C$ considering FGP, MGT, and $T_{30}$ together. FGP increased with the duration of cold stratification up to a period of 6 weeks, but declined after 8 weeks of cold stratification, as prolonged cold stratification can induce dormancy with a resultant decline in germination. Pretreatment with 6-8 weeks of cold stratification or soaking seeds in distilled water or $500mg{\cdot}L^{-1}$ $GA_3$ for 24 h accelerated and increased the germination of S. fritschiana seeds, regardless of temperature. However, further study might be required to evaluate the effect of $GA_3$ concentrations lower than $500mg{\cdot}L^{-1}$ on the promotion of germination in S. fritschiana seeds.

• 한국축산식품학회지
• /
• 제39권5호
• /
• pp.780-791
• /
• 2019

This study aimed to extend the retention of flavor in coffee-containing milk beverage by microencapsulation. The core material was caramel flavor, and the primary and secondary coating materials were medium-chain triglyceride and maltodextrin, respectively. Polyglycerol polyricinoleate was used as the primary emulsifier, and the secondary emulsifier was polyoxyethylene sorbitan monolaurate. Response surface methodology was employed to determine optimum microencapsulation conditions, and headspace solid-phase microextraction was used to detect the caramel flavor during storage. The microencapsulation yield of the caramel flavor increased as the ratio of primary to secondary coating material increased. The optimum ratio of core to primary coating material for the water-in-oil (W/O) phase was 1:9, and that of the W/O phase to the secondary coating material was also 1:9. Microencapsulation yield was observed to be approximately 93.43%. In case of in vitro release behavior, the release rate of the capsules in the simulated gastric environment was feeble; however, the release rate in the simulated intestinal environment rapidly increased within 30 min, and nearly 70% of the core material was released within 120 min. The caramel flavor-supplemented beverage sample exhibited an exponential degradation in its flavor components. However, microcapsules containing flavor samples showed sustained flavor release compared to caramel flavor-filled samples under higher storage temperatures. In conclusion, the addition of coffee flavor microcapsules to coffee-containing milk beverages effectively extended the retention of the coffee flavor during the storage period.

• 한국표면공학회지
• /
• 제56권2호
• /
• pp.137-146
• /
• 2023

Nanosized TiO₂ has been widely investigated in photoelectrochemical or photocatalytic applications due to their intrinsic properties such as suitable band position, high photocorrosion resistance, and surface area. In this study, to achieve the high efficiency in photoelectrochemical and photocatalytic performance, TiO₂ nanotubular structures were formed by anodization at various temperatures and times. The morphological and crystal structure of the anodized TiO₂ nanotubes (NTs) were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The photoelectrochemical (PEC) properties and incident photon-to-current conversion efficiency (IPCE) of the TiO₂ NTs were studied with different lengths and morphologies. From the detailed investigations, the optimum thickness of TiO₂ nanotubes was 3 ㎛. Moreover, we found that the optimum photocatalytic pollutant removal efficiency of TiO₂ nanotubes for photodegradation of Rhodamine B (RhB) under simulated solar light was 5.34 ㎛ of tube length.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.613-619
• /
• 2006

The objectives of this paper are to study the characteristics of heat transfer for enhanced tubes (19.05 mm) used in the condenser with high saturation temperatures and to provide a guideline for optimum design of a condenser using HFC134a. Three different enhanced tubes are tested at a high saturation temperature of $59.8^{\circ}C$ (16 bar); a low-fin and three turbo-C tubes.. The refrigerant, HFC134a is condensed on the outside of the tube while the cooling water flows inside the tube. The film Reynolds number varies from 130 to 330. The wall subcooling temperature ranges from $2.7^{\circ}C$ to $9.7^{\circ}C$. This study provides experimental heat transfer coefficients for condensation on the enhanced tubes. It is found that the turbo-C(2) tube provides the highest heat transfer coefficient.

• 한국미생물·생명공학회지
• /
• 제47권4호
• /
• pp.555-564
• /
• 2019

Biodiesel is produced through the transesterification process in the presence of alcohol and a catalyst that catalyzes the conversion of triglycerides to esters and glycerol compounds. A more optimal product conversion can be achieved using enzymes, such as lipase. Lipase is reported to be produced in osmophilic yeasts due to the low water content in their natural habitats. Wild forest honey is one of the osmophilic natural habitats in Indonesia. However, lipase-producing yeast has not been reported in the Indonesian honey. In this study, we screened the lipase-producing yeasts isolated from wild forest honey collected from Central Sulawesi. The production profile and activity of lipase were determined at different pH values and temperatures. One promising yeast was isolated from the honey, which was identified as Zygosaccharomyces mellis SG 1.2 based on ITS sequence. The maximum lipase production (24.56 ± 1.30 U/mg biomass) was achieved by culturing the strain in a medium containing 2% olive oil as a carbon source at pH 7 and 30℃ for 40 h. The optimum pH and temperature for lipase activity were 6 and 55℃, respectively. The enzyme maintained 80% of its activity upon incubation at 25℃ for 4 h. However, the enzyme activity decreased by more than 50% upon incubation at 35 and 40℃ for 2 h. This is the first study to report the lipase producing capability of Z. mellis. Further studies are needed to optimize the enzyme production.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.493-501
• /
• 2004

The principle of vortex tube and cyclone was introduced to enhance the treatment efficiency of waste air streams containing particulate matters, toluene, and others developed by Hangreen Tech, Ltd. and Hoseo Chemical and Industrial Technology R＆D Center. Adsorption, condensation, and/or coagulation could be induced at low temperature zone formed by vortex tube and Joule-Thomson expansion. The pressurized air was introduced at the tangential direction into the cyclone system applied with the coaxial funnel tube. Easily condensible vapors such as toluene. carbon dioxide, and water vapor were adsorbed enforcedly on coagulated or condensed materials which were formed as cores for coagulation or condensation by themselves. These types of coagulation or condensation rates were rapidly promoted as the diameter being growing up. The maximum removal efficiency for carbon dioxide and toluene was achieved to about 87 and 90 percent, respectively. The Joule-Thomson coefficients were increased with the pressure of air injected in the range of the relative humidities between 10% and 30%. An optimum value was observed within the range of the tested temperatures at a fixed pressure. In conclusion. it could be identified that the treatment efficiency would be depended on the pressure of the process air introduced and physical and chemical characteristics of waste air streams containing target materials for a designed system. The final design parameters should be decided depending upon the given system and target materials.

• 대한기계학회논문집B
• /
• 제20권9호
• /
• pp.2924-2932
• /
• 1996

As the environmental pollution can be greatly reduced and the waste heat can be also recovered through a combustion of municipal solid waste, the incineration begins to be highlighted recently in our country. But it is very difficult to be operated with constant combustion conditions for a long time as the domestic waste is composed of various components, contains a large percentage of water, and has a low heating value. Therefore, the cold flow test and partial hot flow test were conducted in the incinerator by use of injection angles of a secondary air affecting fluid flow as the first action to maintain the optimum combustion conditions. A model to a scale of 1:10 was designed and manufactured through the similarity of model and prototype flows. Velocities and temperatures were measured through the experiment. From the results, fluid flows of secondary air obtained from partial hot flow test correspond almost well with those of main flow obtained from cold flow test. Consequently, injection angles of secondary air are proved to affect main flow decisively.

• 한국수산과학회지
• /
• 제49권5호
• /
• pp.600-606
• /
• 2016

The effects of feeding frequency on the growth, food consumption, body composition, and hematological response of the Korean rockfish Sebastes schlegelii were investigated for 77 days at ambient water temperatures (17.2-24.5℃) in a sea cage in Tongyeong, Korea. Three replicate groups of fish were hand-fed to satiation with a commercial diet in one of four different feeding frequency trials (one meal every 2 days, and one, two and three meals per day). At the end of the experiment, the mean weight gain, specific growth rate, and daily feed intake of fish fed one and two meals per day were significantly higher than those of fish fed one meal every 2 days or three meals per day. The feed efficiency of the fish fed three meals per day was significantly lower than that of the fish in the other groups. The glucose concentration of fish fed one meal every 2 days was significantly higher than that of the other groups. We conclude that the optimum feeding frequency for improving the growth of Korean rockfish weighing 100-200 g reared in sea cages is one meal per day under our experimental conditions.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.906-917
• /
• 1996

This study was conducted to find possible application areas of the by-products generated from the incineration of rice husk. To this end, a pilot-scale rice husk incinerator system was constructed and its performed test was carried. Major findings are summarized as follows. 1. The rice husk incinerator system developed in this study performed satisfactory in terms of thermal efficiencies. At the optimum operating conditions, thermal conversion efficiency and heat exchanger efficiency was 97% ad 60%, respectively, while overall thermal efficiency of the system was 58%. Under all conditions tested, temperatures in the combustion chamber were quite uniform and crystallization of SiO$_2$ in the ash was negligible. 2. NOx and SOx content in the flue gas was well below the legal limit but the CO concentration was around the legal limit. 3. Thermal energy from combustion was successfully recovered by a heat exchanger to provide hot water, ash was found a good supplementary cementing m terial, and the flue gas also was an acceptable $CO_2$ supplier to greenhouses.