• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.175-181
• /
• 2013

The primary element of machining automation is to maximize the utilization of machine tools, which determines the output and lead-time. In particular, 95% of raw materials for wing ribs are cut into chips and 0.6 ton of chips are generated every hour from each machine tool. In order to verify the chip recycling system that controls the chips from the machines in five-axis FMS line, a simulation of the virtual model is constructed using the QUEST simulation program. The optimum speed of the chip conveyor and its operating conditions that directly affect the efficiency of the FMS line are presented including the chip conveyor speed, the maximum capacity of the hopper, and the number of chip compressors.

• Journal of Ginseng Research
• /
• 제13권2호
• /
• pp.143-146
• /
• 1989

선발된 인삼세포주의 anthocyanin 형성과 생장에 미치는 광, 2,4-D 및 sucrose의 영향을 구명하고자 각각 처리를 달리하여 선발세포주를 배양하였던 바 그 결과를 요약하면 다음과 같다. 1. 선발세포주의 anthocyanin 형성에는 광이 필수적이었으며, anthocyanin 함량은 3.18mg/g로서 비교적 많이 형성되었다. 2. 선발세포주의 anthocyanin 형성은 2,4-D의 농도가 증가함에 따라 억제되었고, 특히 2,4-D 0.1ppm 첨가구에서 최대치를 보였으며, 반면에 정상세포주는 2,4-D의 농도에 관계없이 anthocyanin 형성이 미미하였다. 3. 선발세포주의 생장은 정상세포주보다 양호하였으며, 선발세포주는 2,4-D 0.5ppm 첨가배양기에서 그리고 정상 세포주는 2,4-D 1ppm 첨가배양기에서 최대의 생장을 보였다. 4. 선발세포주의 sucrose에 대한 반응을 보면, sucrose 농도 5% 첨가배양기에서 anthocyanin 함량과 생장이 최대를 나타내었다. 5. 이상의 결과를 종합하면 선발한 인삼세포주는 anthocyanin 을 형성하는 특징을 가진 변이체로 인정할 수 있었다.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.50-58
• /
• 2005

It is generally known that paper industry is the second largest industry in the use of process water, and also have the highest environmental impact load in the contaminant sources. Paper is produced from the mixtures composed of 1% fibrous raw materials and 99% water. The optimum use of process water effects on the quality properties of paper and the environmental impact load of waste water treatment. In this research, the kinds of fibrous raw material & additives used in the paperboard production line were investigated, and the quantification of environmental loads and the environmental effects of process water on COD potential were evaluated. The NBDCODs were also analyzed from process water by the method of waste water treatment in paper mill and applied for the optimum use of recycling water, and zero effluent process. In the fibrous raw materials, KOCC caused the highest COD potentials, and sack paper & UKP was comparatively low. The NBDCOD of KOCC largely reduced after biological treatment because of easily biodegradable properties, but AOCC contained non-biodegradable materials. In chemical additives, COD was high in turns of rosin>starch>deaeration agent>dye, NBDCOD greatly reduced in starch and deaeration agent. In the case of 2 kinds of paperboard product, the COD potentials was mainly high in starch, AOCC and KOCC.

• 한국가금학회지
• /
• 제27권3호
• /
• pp.243-254
• /
• 2000

The effect of supplemental microbial phytase and non - phytate phosphorus(NPP) levels on layer productivity and nutrient digestibility were conducted in 640 21 weeks - old HyLine brown layer for 12 weeks. Supplemented phytase levels were 0, 300, 500 and 1,000 DPU/kg diet. NPP levels were adjusted with tricalcium phosphate(TCP), which were 0(0.11% NPP), 0.5(0.20), 1.0(0.29) and 1.5%(0.38). ME, CP and Ca levels were maintained at 2,800㎉/kg diet, 16% and 3.5%, respectively. Egg production was increased with phytase compared to without phytase(P〈0.05). Increasement of egg production was higher latter of experimental period. Egg production was not different to phytase levels. Egg production in TCP levels were increased in above 0.5% compared to 0% TCP. Difference of egg production by TCP was higher after 6 week. Especially, egg production to supplemental phytase was higher in 0% TCP. Egg weight was not different to phytase and TCP levels. Egg mass was increased with phytase compared to without phytase, but not difference significantly. There was similar to phytase levels. Egg mass in TCP group was increased in TCP supplementation(P〈0.05). Feed intake was not different in phytase levels, and greater with increasing TCP levels(P〈0.05). Feed conversion was improved with phytase(P〈0.05), and not difference in TCP levels. All of nutrients digestibility tended to improve with phytase, P(P〈0.05), especially. There were not different among phytase levels. The effect of adding phytase was higher in low phosphorus diets compared normal levels. Eggshell breaking strength and eggshell thickness also improved in added phytase(P〈0.05). Tibial ash and P content were slightly increased with phytase, and Ca content also was higher(P〈0.05) compared without phytase. We concluded that supplemental phytase in low phosphorus diet was showed to increase laying performance, feed efficiency, nutrients digestibility, egg quality, and bone development. Phytase supplementation was able to compensate for low NPP diet. We also thought optimum phytase level is 300 DPU, and can decrease NPP supplementation adding phytase in later diet.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.201-205
• /
• 2007

In the post-Cold War era, acquisition technique of high-resolution satellite imagery (HRSI) has begun to commercialize. IKONOS-2 satellite imaging data is supplied for the first time in the 21st century. Many researchers testified mapping possibility of the HRSI data instead of aerial photography. It is easy to renew and automate a topographical map because HRSI not only can be more taken widely and periodically than aerial photography, but also can be directly supplied as digital image. In this study matching size of IKONOS Geo-level stereo image is presented lot production of digital elevation model (DEM). We applied area based matching method using correlation coefficient of pixel brightness value between the two images. After matching line (where "matching line" implies straight line that is approximated to complex non-linear epipolar geometry) is established by exterior orientation parameters (EOPs) to minimize search area, the matching is tarried out based on this line. The experiment on matching size is performed according to land cover property, which is divided off into four areas (water, urban land, forest land and agricultural land). In each of the test areas, window size for the highest correlation coefficient is selected as propel size for matching. As the results of experiment, the proper size was selected as $123{\times}123$ pixels window, $13{\times}13$ pixels window, $129{\times}129$ pixels window and $81{\times}81$ pixels window in the water area, urban land, forest land and agricultural land, respectively. Of course, determination of the matching size by the correlation coefficient may be not absolute appraisal method. Optimum matching size using the geometric accuracy therefore, will be presented by the further work.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.587-597
• /
• 2007

본 연구는 IKONOS Geo레벨 스테레오 영상으로부터 DEM을 제작하기 위한 토지피복 특성별 정합영역 크기를 결정하고자 한다. 사용된 매칭기법은 상관계수를 이용한 영역기반정합 기법을 적용하였고, 탐색영역을 최소화하기 위해 외부표정요소를 구한 후, 이로부터 정합선을 수립하여 정합하였다. 실험은 산림, 논 밭, 수계, 도심지의 4가지 토지피복 특성별로 수행되어졌으며, 토지피복별 평균 상관계수, 칼럼 라인의 시차영상을 분석한 후, 실험 영상에서 최적의 정합영역 크기를 선정하였다. 실험결과, 산림지역은 $119{\times}119$화소, 논 밭 지역은 $51{\times}51$화소, 물 지역은 $81{\times}81$화소, 도심지는 $21{\times}21$화소가 DEM 제작을 위한 가장 적절한 정합영역 크기로 선정되었다.

• Journal of Plant Biology
• /
• 제15권2호
• /
• pp.7-19
• /
• 1972

The studies of density effect or the effect of population density on plant growth have been done on basis of dry matter production with Raphanus acanthiformis var. simoodaeguen, Brassica campestris var. Pekinensis f. namsounsokoombecheu, Oryza sativa f. kimmajae and O. sativa f. mangyeng grown in the various spacing. 1. In the early period of plant growth in dry weight was not different each other among varying densities, but as time advanced the plant grown vast space grew sufficiently compared with those of narrow one. 2. Iogarithmic relation between the growth of plant (W) and the density (P), log W-log P in the material plants, were approximated by two straight lines, one was horizontal line and another inclined: the former showed non-competition density and the latter competition density addition to these the point interlinking both lines were implied of the optimum density per unit land area at certain growth period. 3. The values of relatvie growth rate (RGR) and net assimilation rate (NAR) were decreased as increase in the density, while those of leaf area ratio (LAR) were rather increased in the same condition, with minor exception. From these results and relation between the productive structure and due to lack of the recieved light intensity owing to the mutal shading among the plants.

• 한국기계가공학회지
• /
• 제12권3호
• /
• pp.61-68
• /
• 2013

Automatic measurement system is required since cycle time and cost of production are increased by various factors in manual systems. This paper presents a machine vision based prototype measurement system for the automotive axisymmetric shape parts which are generally measured by a manual system that is required the tolerance of the part is very small on each machined surface. This measurement system adopts a method in which optical lens is transferred along the profile of the part to minimize measurement cycle time. The main interest of this paper is a development of an optimum measurement algorithm to the outside diameter of the parts that can be applied to various combinations of hardware. The operating system used to implement the whole system is Window XP and corresponding environment.

• 한국시뮬레이션학회논문지
• /
• 제11권3호
• /
• pp.59-65
• /
• 2002

Semiconductor wafer fabrication is a business of high capital investment and fast changing nature. To be competitive, the production in a fab needs to be effectively planned and scheduled starting from the ramping up phase, so that the business goals such as on-time delivery, high output volume and effective use of capital intensive equipment can be achieved. Project executed that use conveyor in bay semiconductor A line. But conveyor capability is lacking and rundown happened in equipment. Do design without normal simulation and conveyor system failed. The comparison is peformed through simulation using .AutoMod a window 98 based discrete system simulation software, as a tool for comparing performance of proposed layouts. In this research estimate optimum conveyor capability, there is the purpose.