Magnetic properties of FeTaN and FeTaC films deposited by DC magnetron reactive sputter were investigated, and correlated with their microstructures. The optimum magnetic properties of Hc : 0.25 Oe, Bs : 14.5 kG, and ${\mu}'$ : 4000 (5MHz) are observed in the $Fe_{78.8}Ta_{8.5}N_{12.7}$ film, and Hc : 0.25 Oe, Bs : 14.5 kG, and ${\mu}'$ : 2700 (5MHz) in the $Fe_{75.6}Ta_{8.1}C_{16.3}$ film. In both FeTaN and FeTaC films with minimum grain size show the best soft magnetic properties. Thermal stability of the soft magnetic properties of FeTaN is found to be higher than FeTaC for similar compositons. TaN and TaC particles form to retard the growth of $\alpha$-Fe grains. TaN particles in FeTaN show higher efficiency in retarding the grain growth during heat treatments resulting the higher thermal stability, compared to TaC particles in FeTaC films.
The objective of this research was to secure the fundamental information in changes of soil physical properties as influenced by the compaction of root media during container filling. Three root media were formulated by blending peatmoss (PM) with expanded rice hull (PM + ERH, 8:2, v/v), carbonized rice hull (PM + CRH, 6:4) and ground and aged pine bark (PM + GAPB, 8:2). Based on the optimum bulk density, the amount of root media filled into 6.0, 7.5, 8.5, 10.5 and 12.5 cm were adjusted to 90, 100, 110, 120, and 130%, then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) were measured. The TP decreased significantly as the packing amount of three root media were elevated in all sizes of container. The TP did not show significant differences among the root media in small sizes of containers, but showed significant differences when sizes of containers became larger. As packing amount of three root media were elevated, the CCs in all sizes of containers were decreased. The PM + CRH had the lowest CC among three root media in containers smaller than 8.5 cm, but had the highest CC in those larger than 10.5 cm. These results indicated that the decreases in CC were influenced by the sizes of containers as well as kinds of root media. The elevation of packing amount in three root media diminished significantly the AFP. The AFP in PM + GAPB medium was two times as high as those of PM + ERH or PM + CRH when equal packing densities were applied in all sizes of containers. As the container sizes became larger in three root media, the extents in decreasing of CC were distinct than those of AFP. Above results indicate that elevation in packing amount of three root media decreased significantly the TP, CC and AFP, but these were influenced differently by sizes of containers and kinds of root media. The results would be useful for expectation in the changes of physical properties in various sizes of containers filled with peatmoss based root media.
To find out the optimum conditions for indigo cell culture in air-lift bioreactor, effects of media composition including nutrients and precursors of the indigo colorants on the cell growth and characteristics of the cell growth under various cultural conditions were analyzed. Optimum cultural conditions were tested and the growth characteristics were analyzed in external and internal loop type air-lift bioreactors during 14-day culture. Better cell growth was obtained when the inoculum size was higher in the range of 0.5∼2.5% packed cell volume tested. In the sucrose concentration of 2 to 4%, the cell growth was better when the sucrose concentration was 4% (w/w) in both types of reactors. Sucrose was used up in the early stage of exponential phase of growth At the optimum concentration of a Precursor tryptophan at 1 U UW was 3.8 g/l in internal loop bioreactor, and 3.5 g/l in external one after 14 days of cultivation. Addition of indole showed negative effect on cell growth of suspension culture in air-lift biorector culture and cell mass of 2.5 g/l and 2.2 g/l were obtained in external and internal loop bioreactor, respectively. Selected inorganic nitrogen source potassium nitrate showed about 110% increase in cell growth than that of control. DCW was 16.34 g/l under optimum conditions during 14-day cultivation in internal loop bioreactor.
A micro-mechanical pipe network model with the shape of a cube was developed to simulate the behavior of fluid flow through a porous medium. The fluid-flow mechanism through the cubic pipe network channels was defined mainly by introducing a well-known percolation theory (Stauffer and Aharony, 1994). A non-uniform flow generally appeared because all of the pipe diameters were allocated individually in a stochastic manner based on a given pore-size distribution curve and porosity. Fluid was supplied to one surface of the pipe network under a certain driving pressure head and allowed to percolate through the pipe networks. A percolation condition defined by capillary pressure with respect to each pipe diameter was applied first to all of the network pipes. That is, depending on pipe diameter, the fluid may or may not penetrate a specific pipe. Once pore pressures had reached equilibrium and steady-state flow had been attained throughout the network system, Darcy's law was used to compute the resultant permeability. This study investigated the sensitivity of network size to permeability calculations in order to find out the optimum network size which would be used for all the network modelling in this study. Mean pore size and pore size distribution curve obtained from field are used to define each of pipe sizes as being representative of actual oil sites. The calculated and measured permeabilities are in good agreement.
Journal of the Korea Institute of Information and Communication Engineering
/
v.9
no.3
/
pp.547-554
/
2005
Ethernet has been given a greater attention recently due to tendency of unifying most of transmission technique to ethernet. This paper studied the design of MAC which contains high layer interface, transmit engine, flow control block, receive engine, reconciliation sublayer, configuration block, statistics block, and XGMll interface block. Performance evaluation was performed using C language for 10cbps ethernet Data Link to design the optimum hardware, then internal FIFO and initial parameters were evaluated. When offered load is $95\%$, the size of the internal FIFO is required 512-word. When offered load is $97\%$, the size of the internal FIFO is required 1024-word. Based on the result of performance evaluation, MAC was designed in VHDL Language and verified using simulator. MAC core that processes 64-bit data, operates at 168.549MHz and hence supports the maximum 10.78Gbps. The designed MAC core is applicable to an area that needs a high-speed data processing of 10Gbps or more.
Ciliates have the possibility of a new live food in marine finfish culture because of their wide range of body size, thin tell wall, show motility, and fast reproduction rate. In this research, six species of ciliates were isolated from south coast and salt pond in Korea. The fitness of these species as a live food was evaluated in terms of size, motility, suspensibility and cell density. As the result, Euplotes sp. (K-1) was found suitable to be a new live food which might substitute rotifers, Brachionus plintilis and B. rotundiformis in fish larvae culture. The modified $F{\emptyset}yn's$ Erdschreiberd media, MErds-2 with the addition of glycine, glucose and yeast extract increased six times higher growth rate of Euplotes sp. (K-1) than the basic F$\emptyset$yn's Erdschreiberd media. The optimum water temperature, pH and light intensity for this ciliates were $22.5^{\circ}C$, 8 and 2,000 lux, respectively, and its culture environmental range was relatively wide, On the other hand, this ciliate fed baker's yeast, Saccharomyces cererisiae grew up to 1,240 inds./mL with the inocula of 100 inds./mL within 7 days. The results of the study showed that Euplotes sp. (K-1) has a potential to be utilized as a new live food in fish larvae culture.
Functional effects of cauliflower mushroom (Sparassis latifolia) have been magnified by various media and internal and external research papers, recently. So, optimum condition of wood chip particle size and cultivation method of high ${\beta}$-glucan content for bulk cultivation generalization of cauliflower mushroom farms researched. As a result, T7 (1~2 mm 25%, 2~4 mm 50%, over 4 mm 25%) media as mixed media of certain ratio of particle size, showed excellent growth at $11.5{\pm}1.0$ cm / 44 days. Also, production of fruit body found higher than control and marketable pileus part took 85% ratio. The ${\beta}$-glucan content at media composition condition showed 1.4~2.4 times higher content in stipe part than pileus part. Also, PCF300 medium found 59.5% highest ${\beta}$-glucan content in stipe part. While ${\beta}$-glucan content showed 33.0% low content in pileus part. Therefore it needed additional study that ${\beta}$-glucan content improved in pileus part. In conclusion, production of high ${\beta}$-glucan content cauliflower mushroom was possible by T7 condition (wood chip particle size: 1~2 mm 25%, 2~4 mm 50% and over 4 mm 25%, composition: corn powder, flour and 300 ppm yeast).
Red spot disease was found on broad bean (Vicia faba) in several farmer's field located in Changseon-myon, Namhae-gun, Gyeongnam provice in Korea. The typical symptoms of the disease were appeared on leaves and stems. The infection rates of the disease in the surveyed area were ranged from 16.4 to 84.6%. Lesions on the leaves were round with 1~4.2 mm in size and on the stem were narrow long fusiform with 1~15 mm in size. Conidia and conidiaphores were not readily farmed on PDA, however, a few conidia were formed on PDA added in extracts of 10 g of broad bean leaves. Conidia were light yellow green in color, globose or obovoid in shape, and 10~24$\times$8~22 $\mu$m in size. Conidiophores were cylindrical in shape, light brown in color and 3.6~12.8 $\mu$m in wide. Sclerotia of the fungus were readily formed in artificial media such as PDA. They were ellipsoid to irregular in shape, 1.2~11.8 mm in size and dark in color, The optimum temperature far growth of the fungus was about 2$0^{\circ}C$. On the basis of mycological characteristics, the fungus was identified as Botrytis fabae. This is the first report on the red spot of broad bean caused by Botrytis fabae in Korea.
A edible mushroom, Hypsizygus marmoreus is commercially cultivated in Northeast Asia. Japan's annual production is 110,000ton or more. Since 2002, cultivation is expanded in Korea. To investigate the morphological, cultural and microscopic characteristics of Hypsizygus marmoreus, 109 isolates were collected from Korea and other countries. Clamp connection, chlamydospore and arthrospore were present in all tested isolates of H. marmoreus except HYM-002 and HYM-004. Also pilealtrama, gilltrama, basidia, basidiospore and cystidia of fruiting body were no difference among the isolates in the present investigation. Morphological characteristics of fruiting body was that color of pileus was brown and white, irregular as marble, the average size 12~22mm and stipes was $46{\sim}91{\times}6{\sim}10mm$. Isolates HYM-031, HYM-047 and HYM-109 formed grayish-brown pileus with a faint pattern. Molecular analysis with RAPD and ITS rDNA sequence analysis were also performed to check the genetic relationships among H. marmoreus isolates. Based on the RAPD analysis using the URP-PCR, all isolates of H. marmoreus were clustered into large 3 groups but more than 90% showed high similarity. In addition, morphological and geographical differences have been classified as an independent cluster. The brown and white strains enclosed in same cluster. So genetically no significance difference was observed between these two strains. ITS gene sequences of 16 selected isolates which were 640 bp long, were aligned and compared. The similarity in ITS sequence was 94.8 to 99.1% among tested isolates and the H. marmoreus isolates in GeneBank. In conclusion the tested isolates were H. marmoreus. Morphological and molecular observations proved that all tested isolates were belonging to H. marmoreus. For the stable artificial cultivation, composition of optimum media, mature period and light condition were established. Optimal formula of artificial cultivation medium was Douglas sawdust: corn cob: soybean meal: wheat bran = 40:30:15:15. In addition, 7% rice bran and 3% yellow sucrose was the most effective composition for spawn's liquid medium. For the maturation of the isolates was favorable for growing for 20 to 30 days at $25^{\circ}C$ and the LED lights in mixture of white and blue was good for growth period. For effective growth, the temperature, humidity and aeration control in every step was important.
Several new ion exchange resins have been synthesized from chloromethyl styrene-1, 4-di-vinylbenzene with 1%, 2%, 5% and 10%-crosslinking and macrocyclic ligands of cryptand type by interpolymerization method. The adsorption characteristics and the pH, time, solvents and concentration dependence of the adsorption of metal ions by this resin were studied. The correlation between the separation characteristics of uranium and transition metal on the resins and the stability constants of complexes with macrocyclic ligands have been examined. The resins were very stable in both acidic and basic media and had good resistance to heat at $280^{\circ}C$. The $UO_2^{2+}$ aqueous solution was not adsorbed on the resins below pH 3.0, but the power of adsorption of $UO_2^{2+}$ increased rapidly above pH 4.0. The optimum equilibrium time for adsorption of metallic ions was twenty minutes and adsorptive power decreased in proportion to crosslinking size of the resins and order of dielectric constants of solvents used and the selective sequence for metal cations is in the order of $UO_2^{2+}$, $Cu^{2+}$ and $Ce^{3+}$ .
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.