• YAKHAK HOEJI
• /
• v.44 no.6
• /
• pp.578-587
• /
• 2000

The purpose of the present study was to design and prepare the optimum formulation for the oral administration of titrated extract of the unsaponifiable fraction of Zea mays L. (ETIZM). For this purpose, we simulated the blood concentration of ETIZM after its oral administration, changing the dissolution rate constants $(0.05{\sim}20\;hr^{-1})$. In vivo parameters, such as absorption rate constant $(k_a)$, elimination rate constant (k) and volume of distribution (Vd), were incorporated in the simulation on the basis of the experiments and literatures. When the dissolution rate constant $(k_r)$ is over $5\;hr^{-1}$, the absorption process appears to be the rate limiting step for the transport of ETIZM from the G.I. ract to the blood circulation. While less than $5\;hr^{-1}$, the dissolution rate considered to be the rate limiting step. Moreover, the optimum blood concentration was shown in the range from 1 to $5\;hr^{-1}$ of $k_r$ in the simulation. To design and prepare the tablets on the basis of the above results, 7 formula containing HPMC, PEG 4000 and PEG 6000 (1-5%, respectively) were prepared and evaluated. The tablets containing PEG 4000 (1%), PEG 6000 (1%) or PEG 4000 (5%) satisfy the optimum $k_r$ range ($1-5\;hr^{-1}$). These formulations, therefore, will be able to show the more effective blood concentration, compared with the commercial products after the oral administration.

• The Plant Pathology Journal
• /
• v.22 no.3
• /
• pp.303-308
• /
• 2006

Ethaboxam is a fungicide controlling plant diseases caused by Oomycetes. Efforts were made to improve its fungicidal activity applying formulation technology. Fungicidal activity of ethaboxam against cucumber downy mildew caused by Pseudoperonospora cubensis was improved by incorporating polyoxyethylene cetyl ether (PCE) in a wettable powder formulation. It was found that the optimum combination ratio of PCE and ethaboxam was 3:1, and a tank-mix of $150{\mu}g/ml$ of ethaboxam and $450{\mu}g/ml$ of PCE would be as good as the standard 25 % WP formulation diluted to $250{\mu}g/ml$ ethaboxam without PCE in controlling cucumber downy mildew. Based on this results, a wettable powder (WP) co-formulation containing 15% of ethaboxam and 45% of PCE was developed in this study, and tested for its performance in the fields. This co-formulation showed significant improvement in persistence of fungicidal activity and curative efficacy of ethaboxam against cucumber downy mildew. The improved control efficacy was also confirmed for control of grape downy mildew caused by Plasmopara viticola and potato late blight caused by Phytophthora infestans in the field tests.

• The Plant Pathology Journal
• /
• v.23 no.1
• /
• pp.26-30
• /
• 2007

Phosphorous acid is known to effectively control various Oomycetes diseases. The phosphoric acid moves upward and downward through the xylem and phloem in plants. The sustainable forms of the slow releasing chemical in rhizosphere would be ideal to be up-taken by plants. Therefore, we developed a new system for phosphorous acid formulation using a carrier coated with polysaccharides. When the product was applied in rhizosphere, the adequate amount of phosphorous acid was consistently released up to 4 weeks in rhizosphere soils. While soil drenching with phosphorous acid at 1,000 ${\mu}g/ml$ and metalaxyl at 150 ${\mu}g/ml$ were not effective to control pepper Phytophthora blight for 4 weeks, direct application of our formulation product around basal stem of pepper plants resulted in excellent disease control effect against Phytophthora blight over 4 weeks. The application of 4 g of our product per plant was optimum to control the disease, and 8 g product/plant did not cause phytotoxicity. Based on the results, we conclude that the applications of the formulation product once or twice during cropping season can control Phytophthora diseases on various crops.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1795-1806
• /
• 2018

Objective: The study was designed to establish choline deficiency model (CDM) in broilers for evaluating efficacy of polyherbal formulation (PHF) in comparison with synthetic choline chloride (SCC). Methods: A total of 2,550 one-day-old Cobb 430 broiler chicks were randomly assigned to different groups in three experiments. In experiment 1, G1 and G2 served as normal controls and were fed a basal diet with 100% soybean meal (SBM) as a major protein source supplemented with and without SCC, respectively. In G3, G4, G5, and G6 groups, SBM was replaced at 25%, 50%, 75%, and 100% by soy protein isolate (SPI) to induce a graded level of choline deficiency. In experiment 2, PHF (500 and 1,000 g/ton) in comparison with SCC (1,000 g/ton) were evaluated. In experiment 3, dose-response of PHF (200, 400, and 500 g/ton) with SCC (400 g/ton) was determined. Results: Replacement of SBM by SPI produced a linear decrease in body weight gain (BWG) with a poor feed conversion ratio (FCR). 25% SBM replacement by SPI yielded an optimum negative impact on BWG and FCR; hence, it is considered for further studies. In experiment 2, PHF (500 and 1,000 g/ton) and SCC (1,000 g/ton) showed a similar performance in BWG, FCR and relative liver weight. In experiment 3, PHF produced an optimum efficacy at 400 g/ton and was comparable to SCC in the restoration of serum aspartate aminotransferase activity, abdominal fat, breast muscle lipid content and liver histopathological abnormalities. Conclusion: Replacement of SBM by SPI caused choline deficiency characterised by worsening of BWG, FCR, elevation in liver enzymes and histopathological changes indicating fatty liver. CDM was found valid for evaluating SCC and PHF. It is concluded that PHF has the potential to mimic biological activities of SCC through the restoration of negative effects caused by CDM.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.185-192
• /
• 2003

This study presents the Optimum Evaluation of PS Concrete Deck and High Strength Two Plate Girder System. Recently, for the simplification of structure and the long length of bridge, a small number girder bridge which minimized a number of girder by two is much designed and constructed. For the structural analysis, a finite element formulation considering with even the matter of torsion in the three-dimensional problem is presented. And connectively, for the design of optimum section, an algorithm of optimum design is developed. The section of a small number girder bridge which constituted of two girders and PS Concrete Deck is optimized by using optimum program developed in this study. and two girders bridge refered in this study is proved a efficiency and a economy by being compared and checked to the general plate girder bridge with five girder and Reinforced Concrete Deck.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.95-101
• /
• 2002

Matrix tablets of nifedipine (NP) were prepared with Eudragit, diluent (lactose or Ca. phosphate) and Mg. stearate employing two different preparation methods (wet granulation and direct compression) to develop its sustained-release dosage forms. The effects of various formulation factors on the dissolution rate of the drug were investigated. Dissolution test was studied in pH 6.8 phosphate buffer containing 1% sodium lauryl sulfate using the paddle method. Formulation factors were the type and content of Eudragit, the type of diluent and the tablet preparation method. The optimum formula of NP matrix tablet, which resulted in a similar dissolution profile to that from Adalat Oros used as a reference, was 30 mg NP, 10% Eudragit RS, 2% Mg. stearate and an adequate quantity of lactose to yield 500 mg weight using the wet granulation method.

• Structural Engineering and Mechanics
• /
• v.52 no.1
• /
• pp.205-220
• /
• 2014

This paper is concerned with the modification of multidisciplinary feasible formulation for MDO problems using the integrated coupled approximate models. A drawback of conventional MDFs is the numerical difficulty in decomposing the design variables and deriving the coupled equations of state. To overcome such a drawback of conventional methods, the coupling in analysis and design is resolved by approximating the state variables in each discipline by the response surface method and by modifying the optimization formulation using the corresponding integrated coupled approximate models. The validity, reliability and effectiveness of the proposed method are illustrated and verified through two optimization problems, a mathematical MDF problem and the multidisciplinary optimum design of suspension unit of wheeled armored vehicle.

• Archives of Pharmacal Research
• /
• v.27 no.3
• /
• pp.351-356
• /
• 2004

A transdermal preparation containing diclofenac diethylammonium (DDA) was developed using an O/W microemulsion system. Of the oils tested, lauryl alcohol was chosen as the oil phase of the microemulsion, as it showed a good solubilizing capacity and excellent skin permeation rate of the drug. Pseudoternary phase diagrams were constructed to obtain the concentration range of oil, surfactant and cosurfactant for microemulsion formation, and the effect of these additives on skin permeation of DDA was evaluated with excised rat skins. The optimum formulation of the microemulsion consisted of 1.16% of DDA, 5% of lauryl alcohol, 60% of water in combination with the 34.54% of Labrasol (surfactant)/ethanol (cosurfactant) (1:2). The efficiency of formulation in the percutaneous absorption of DDA was dependent upon the contents of water and lauryl alcohol as well as Labrasol: ethanol mixing ratio. It was concluded that the percutaneous absorption of DDA from microemulsions was enhanced with increasing the lauryl alcohol and water contents, and with decreasing the Labrasol:ethanol mixing ratio in the formulation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.238-245
• /
• 2000

A general formulation for shape design sensitivity analysis over a plane arch structure is developed based on a variational formulation of curved beam in linear elasticity. Sensitivity formula is derived using the material derivative concept and adjoint variable method for the stress defined at a local segment. Obtained sensitivity expression, which can be computed by simple algebraic manipulation of the solution variables, is well suited for numerical implementation since it does not involve numerical differentiation. Due to the complete description for the shape and its variation of the arch, the formulation can manage more complex design problems with ease and gives better optimum design than before. Several examples are taken to show the advantage of the method, in which the accuracy of the sensitivity is evaluated. Shape optimization is also conducted with two design problems to illustrate the excellent applicability.

• YAKHAK HOEJI
• /
• v.29 no.4
• /
• pp.193-198
• /
• 1985

In formulation technology, the drugs forming eutectic mixture cause many pharmaceutical problems. In this study, the method to prevent such problems has been investigated. The combined drugs of aspirin and isopropylantipyrine forming eutectic mixtures were granulated by using three kinds of binders (PVP, HPMC, starch) and these granules were made into pellets by compacting them with various compressional forces. It was possible to select optimum conditions in granulating, tableting, etc. Disintegration time and dissolution pattern were investigated about this formulation, too.