1 |
Berkes, U.L. (1990), "Efficient optimization of aircraft structures with a large number of design variables", J. Aircraft, 27, 1073-1078.
DOI
|
2 |
Alexandrov, N.M. and Lewis, R.M. (1999), "Comparative properties of collaborative optimization approaches to MDO", Proceedings of the First ASMO UK/ISSMO Conferences on Engineering Design Optimization, July.
|
3 |
Anitescu, M. and Hart, G.D. (2004), "A fixed-point iteration approach for multibody dynamics with contact and small friction", Math. Prog., 101(1), 3-32.
|
4 |
Balling, R.J. and Sobieszczanski-sobieski, J. (1994), "Optimization of coupled systems: a critical overview of approaches", AIAA Papers 94-4339.
|
5 |
Box, G.E.P. and Wilson, K.B. (1951), "On the experimental attainment of optimum conditions", J. Royal Statist. Soc. Ser. B, 13(1), 1-38.
|
6 |
Choi, E.H., Ryoo, J.B., Cho, J.R. and Lim, O.K. (2010), "Optimum suspension unit design for enhancing the mobility of wheeled armored vehicles", J. Mech. Sci. Tech., 24, 323-330.
DOI
ScienceOn
|
7 |
Braun, R.D. and Kroo, I.M. (1997), "Development and application of the collaborative optimization architecture in a multidisciplinary environment, Multidisciplinary design optimization state of the art", SIAM Ser., Proc. Appl. Math., 80, 98-116.
|
8 |
Cho, J.R., Jeong, H.S. and Yoo, W.S. (2002), "Multi-objective optimization of tire carcass contours using a systematic aspiration-level adjustment procedure", Comput. Mech., 29, 498-509.
DOI
|
9 |
Coelho, R.F., Breitkopf, P. and Knopf-Lenoir, C. (2008), "Model reduction for multidisciplinary optimization - application to a 2D wing", Struct. Multidisc. Optim., 37, 29-48.
DOI
ScienceOn
|
10 |
Cramer, E.J., Dennis, J.E., Frank, P.D., Lewis, R.M. and Shubin, G.R. (1993), "Problem formulation for multidisciplinary optimization", The AIAA Symposium on Multidisciplinary Design Optimization CRPCTR93334.
|
11 |
Cramer, E.J., Frank, P.D., Shubin, G.R. and Dennis, J.E. (1992), "On alternative problem formulations for multidisciplinary design optimization", 4th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Cleveland, OH.
|
12 |
Creighton, D.C. (1985), Revised Vehicle Dynamics Module: User's Guide for Computer Program Vehdyn II, Department of the Army, USA.
|
13 |
Guita, A.A. and Watson, L.T. (1998), "A comparison of approximate modeling techniques: polynomial versus interpolating models", Proceedings of 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Design, St. Louis, MO, USA.
|
14 |
Haftka, R.T. (1985), "Simultaneous analysis and design", AIAA J., 23, 1099-1103.
DOI
ScienceOn
|
15 |
Lim, O.K. and Arora, J.S. (1986), "An active set RQP algorithm for optimal design", Comput. Meth. Appl. Mech. Eng., 57, 51-56.
DOI
ScienceOn
|
16 |
Hulme, K.F. and Bloebaum, C.L. (2000), "A simulation-based comparison of multidisciplinary design optimization solution strategies using CASCADE", Struct. Multidisc. Optim., 19, 17-35.
DOI
|
17 |
James, M.L., Smith, G.M., Wolford, J.C. and Whaley, P.W. (1994), Vibration of Mechanical and Structural Systems: with Microcomputer Applications, Harper Collins College Publishers, New York.
|
18 |
Sharp, R.S. and Crolla, D.A. (1987), "Road vehicle suspension system design - review", Veh. Syst. Dyn., 16, 167-192.
|
19 |
Mcallister, C.D., Simpson, T.W., Hacker, K., Lewis, K. and Messac, A. (2005), "Integrating linear physical programming within collaborative optimization for multiobjective multidisciplinary design optimization", Struct. Multidisc. Opt., 29, 178-189.
DOI
|
20 |
Sellar, R.S., Batill, S.M. and Renaud, J.E. (1996), "Response surface based, concurrent subspace optimization for multidisciplinary system design", AIAA Paper 96-0714.
|
21 |
Sobieszczanski-sobieski, J. (1982), "A linear decomposition method for optimization problems - Blueprint for development", NASA Technical Memorandum 83248.
|
22 |
Sobieszczanski-sobieski, J. (1990), "The sensitivity of complex, internally coupled systems", AIAA J., 28, 153-160.
DOI
|
23 |
Sobieszczanski-sobieski, J. (1998), "Optimization by decomposition; a step from hierarchic to nonhierarchic systems", NASA Technical Report CP-3031.
|
24 |
Sobieszczanski-sobieski, J., Agte, J. and Sandusky, R. (1998), "Bi-level integrated system synthesis (BLISS)", NASA Technical Report TM-1998-208715, Langley Research Center, Hampton, Virginia.
|
25 |
Sleeper, R.K. and Dreher, R.C. (1980), "Tire Stiffness and Damping Determined from Static and Freevibration Tests", NASA Technical Paper.
|
26 |
Bucher, C. and Most, T.A. (2008), "A comparison of approximate response functions in structural reliability analysis", Probab. Eng. Mech., 23(2-3), 154-163.
DOI
ScienceOn
|
27 |
Haftka, R.T., Sobieszczanski-sobieski, J. and Padula, S.L. (1992), "On options for interdisciplinary analysis and design optimization", Struct. Optim., 4, 65-74.
DOI
|