• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.193-198
• /
• 2019

We propose a novel method to design a dispersion map for a WDM (Wavelength Division Multiplexing) ring network with the capability of wavelength reconfiguration. The method is simple, but gives us an optimum set of DCMs (Dispersion Compensation Modules) which satisfies a given value of the tolerable residual dispersion. The proposed method does not depend on compensation method, fiber type, or modulation format. We also demonstrate numerically how it works with an example 10-node ring network.

• 한국광학회지
• /
• 제8권6호
• /
• pp.476-481
• /
• 1997

0.98$\mu\textrm{m}$ 파장으로 펌핑되는 광대역폭 erbium 첨가 광섬유 광원에서 중심파장의 변화를 최소화할 수 있는 최적 동작 조건을 실험적으로 도출하였다. 중심파장의 안정을 위한 최적 조건은 광원이 isolation된 경우와 광원에 귀환광이 존재하는 경우에 각기 다르게 나타났다. 귀환광이 있는 경우에은 isolation된 경우에 비해 적정 펌프 power가 낮은 power영역에서 존재하였으며 더욱 넓은 펌프 power 범위에 걸쳐 중심파장의 변화가 거의 없는 것으로 나타났다. 다만 isolation된 경우에 비해 광출력이 감소하였으며 중심파장의 변화가 귀환수준의 변화에 대해 민감하였다. 따라서 귀환수준만 일정하게 유지된다면 귀환광이 존재하는 경우에 중심파장 안정성면에서 더 나은 특성을 얻을 수 있으며, 광원에 일정한 수준의 dc 귀환광을 넣어줌으로써 중심파장 안정성을 강화시킬 수 있다.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1950-1956
• /
• 1997

An engineering goal in vibration and noise professionals is to develope quiet machines at the preliminary design stage, and various numerical techniques such as FEM, SEA or BEM are one of the schemes toward the goal. In this paper, the research has been focused on the sensitivity effect of mesh sizes for FEM application so that the optimum size of the mesh that leads to engineering solution within acceptable computing time could be generated. In order to evaluate the mesh size effect, three important parameters have been examined : natural frequencies, number of modes and driving point mobility. First, several lower modes including the fundamental frequency of a 2-D plate structure have been calculated as mesh size changes. Since theoretical values of natural frequencies for a simple structure are known, the deviation between the numerical and theoretical values is obtained as a function of mesh size. The result shows that the error is no longer decreased if the mesh size becomes a quarter wavelength or smaller than that. Second, the mesh size effect is also investigated for the number of modes. For the frequency band up to 1.4 kHz, the structure should have 38 modes in total. As the mesh size reaches to the quarter wavelength, the total count in modes approaches to the same values. Third, a mobility function at the driving point is compared between SEA and FEM result. In SEA application, the mobility function is determined by the modal density and the mass of the structure. It is independent of excitation frequencies. When the mobility function is calculated from a wavelength to one-tenth of it, the mobility becomes constant if the mesh becomes a quarter wavelength or smaller. We can conclude that dynamic parameters, such as eigenvalues, mode count, and mobility function, can be correctly estimated, while saving the computing burden, if a quarter wavelength (.lambda./4) mesh is used. Therefore, (.lambda./4) mesh is recommended in structural vibration analysis.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.240-244
• /
• 2009

An Er-doped superfluorescent fiber source is designed and constructed with the double-pass forward configuration, which aims at high stability of its mean wavelength against temperature variation. As a result, thermal stability of mean wavelength better than 1 ppm is obtained against the temperature variation of ${\pm}5^{\circ}C$ around the optimum operating temperature. The optimum operating temperature can be tuned with the Er-doped fiber length and the pump power.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1009-1015
• /
• 2013

Ultra-short laser pulses are effective, when high requirements concerning accuracy, surface roughness and heat affected zone are demanded for surface structuring. In particular, picosecond laser systems that are suited to be operated in industrial environments are of great interest for many practical applications. This paper focused on inducing optimum process parameters for higher volume ablation rate by analyzing a relationship between crater diameter and optical spot size. In detail, the dependency of the volume ablation rate, penetration depth and threshold fluence on the pulse duration 8 ps and wavelength of 515 nm was discussed. The experimental results showed that wavelength of 515 nm resulted in less threshold fluence ($0.075J/cm^2$) on copper than IR wavelength ($0.3J/cm^2$). As a result, it was possible that optimum fluence for higher volume ablation rate was achieved with $0.28J/cm^2$.

• 방사선산업학회지
• /
• 제10권4호
• /
• pp.167-171
• /
• 2016

The scintillation efficiency of the polystyrene based plastic scintillator depends on the ratio of the wavelength shifters, organic fluors(PPO and POPOP). Thus, 24 samples of the plastic scintillator were fabricated in order to find out the optimum ratio of the wavelength shifters in the plastic scintillator. The fabricated plastic scintillators were trimmed through a cutting and polishing process. They were used in gamma energy spectrum measurement with the $^{137}Cs$ emitting mono-energy photon with 662 keV for the comparison of the scintillation efficiency. As a result, it was found out that the scintillator sample with 1.00 g of PPO (2,5-Diphenyloxazole) and 0.50 g of POPOP (1,4-Bis(5-phnyl-2oxidazolyl)benzene) dissolved in 100 g of styrene solution has the optimum ratio in terms of the light yield of the polystyrene based plastic scintillator.

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.69-75
• /
• 1998

We demonstrate wavelength conversion of 2.5Gb/s optical signals by four-wave mixing (FWM) in a semiconductor optical amplifier (SOA). We investigate the effect of input pump and signal powers on the coversion efficiency, optical signal-to-noise ratio (OSNR) and extinction ratio to be a measure of performance in a wavelength converter. As a result, we show that the maximum bit error rate (BER) performance can be obtained by co promising among high-vonversion efficiency (minimum Pprobe), high-OSNR (maximum Pprobe) and low-cross-gain saturation effects (Pprobe kept at least 6dB weaker than Ppump). In our experiment, we obtain optimum performance at +3 dBm pump power and -6dBm signal power. The power penalty incurred in the wavelength conversion can be minimized by careful selection of the input pump and signal powers. We show that about 0.5dB power penalty for 3.2nm wavelength coversion at 10-10 BER is achievable.

• 분석과학
• /
• 제22권4호
• /
• pp.307-312
• /
• 2009

수용액 중의 carbaryl을 형광분광법을 이용하여 정량하기 위한 분석방법에 대하여 연구하였다. 분석의 최적 조건을 구하기 위해서 들뜸 파장, 계면활성제의 농도, 보조계면활성제인 ethanol의 농도 및 방출 파장의 방출 세기에 대한 영향을 조사하였다. Carbaryl 용액에 계면활성제인 sodium dodecyl sulfate (SDS)을 첨가하였을 때 방출세기가 조금 증가하였으며 보조계면활성제인 ethanol을 첨가하였을 때 방출 세기가 현저히 증가함을 관찰하였다. 최적 분석 조건의 들뜸 파장, 계면활성제의 농도, 보조계면활성제인 ethanol의 농도 및 방출 파장은 각각 281 nm, $1.0{\times}10^{-2}mol/L$, 20% (v/v), 349 nm 이었다. 최적 분석조건에서 carbaryl의 검정곡선의 감응범위와 검출한계($3{\sigma}$)는 각각 $5{\times}10^{-7}$에서 $1.0{\times}10^{-4}mol/L$ 및 $1.1{\times}10^{-8}mol/L$이었다. 검정곡선에서 직선성이 성립하는 농도 범위에서 상관계수(S/N=3)는 0.9996이었다.

• 컴퓨터교육학회논문지
• /
• 제9권1호
• /
• pp.97-106
• /
• 2006

차세대 인터넷 백본망에서 DWDM 기술은 기존의 TDM 기반 인터넷이 가진 회선 부족 문제를 해결하기 위한 대안으로 등장하였다. DWDM 망에서는 자원의 효율적인 사용과 각기 다른 사용자 요구사항을 충족하기 위해 연결 설정시 RWA 문제와 더불어 파장 변환 기능에 대한 고려가 필수적이다. 본 논문에서는 제한된 범위의 파장 변환 기능 및 선택된 노드의 파장변환기 사용에 대한 효율적인 방안에 대해 기술하고, 성능 실험을 통해 최적의 파장변환기 사용을 검증한다.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.17-21
• /
• 2012

A surface-normal input/output volume holographic grating coupler (VHGC) operating at 1550nm wavelength region by using a $10{\mu}m$-thick DuPont photopolymer film is designed and fabricated. The angular and wavelength responses of the input/output VHGC are investigated in order to validate applicability of this device in integrated optics and optical communications. The effect of incident-beam position on the output reflectance to determine optimum condition for input coupling is also presented. The fabricated input/output VHGC exhibited an angular selectivity of ${\sim}0.027^{\circ}$, a wavelength selectivity of ~0.8 nm, and an output peak reflectance of 34.13%.