• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.159-160
• /
• 2017

Recently, researches on controlled low strength materials using coal ashes have been actively conducted in Korea. Controlled Low Strength Material by using a large amount of Coal Ashes, which is a by-product of the industry, will solve the environmental problems caused by coal ash as well as economic formulation. In this paper, the compressive strength and flow of the CLSM binder were investigated in order to select the optimum mixing ratio.

• Computers and Concrete
• /
• 제31권6호
• /
• pp.501-511
• /
• 2023

The strengthening efficiency of biopolymer treated soil depends on biopolymer type, concentration ratio, soil type, initial water content, curing time and mixing method. In this study, the physical and mechanical properties of xanthan gum (XG) treated kaolinite were investigated through compaction test, Atterberg limit test, triaxial test and unconfined compression test. The results indicated that the optimum water content (OWC) increased from 30.3% of untreated clay to 33.5% of 5% XG treated clay, while the maximum dry density has a slight increase from 13.96 kg/m³ to 14 kg/m³ of 0.2% XG treated clay and decrease to 2.7 kg/m³ of 5% XG treated clay. Meanwhile, the plastic limit of XG treated clay increased with the increase of XG concentration, while 0.5% XG treated clay can be observed the maximum liquid limit with 79.5%. Moreover, there are the ideal water content about 1.3-1.5 times of the optimum water content achieving the maximum dry density and curing time to obtain the maximum compressive strength for different XG contents, which the UCS is 1.52 and 2.07 times of the maximum UCS of untreated soil for 0.5% and 1% XG treated clay, respectively. In addition, hot-dry mixing can achieve highest UCS than other mixing methods (e.g., dry mixing, wet mixing and hot-wet mixing).

• Food Science and Biotechnology
• /
• 제14권6호
• /
• pp.793-797
• /
• 2005

Optimum conditions for cholesterol removal in egg yolk were evaluated based on ratio of egg yolk-to-water, crosslinked ${\beta}$-cyclodextrin (${\beta}$-CD) concentration, and mixing temperature, time, and speed by adding crosslinked ${\beta}$-CD treated with adipic acid. Cholesterol removal in egg yolk-water mixture increased with increasing ${\beta}$-CD level (10-25%). About 95% was removed by 25% ${\beta}$-CD at 1:1 ratio of egg yolk-to-water and 800 rpm mixing at $40^{\circ}C$ for 30 min. In recycling study, removal rates were measured using ten times recycled crosslinked ${\beta}$-CD in egg yolk, and 85% cholesterol removal was observed with eight times reuse. These results indicated that over 90% cholesterol was removed at 1:1 ratio of egg yolk-to-water, 20% crosslinked ${\beta}$-CD addition, and 30 min mixing with 600 rpm at $40^{\circ}C$.

• 한국해양바이오학회지
• /
• 제6권2호
• /
• pp.53-61
• /
• 2014

This study was investigated the antimicrobial activity of glutaraldehyde cross-linked glucosamine. Glutaraldehyde was used as a cross-linker which specifically combines an amine-group of molecules. To optimize the mixing ratio of glutaraldehyde and glucosamine, mixing ratio was set up 1:1, 2:1, 3:1 and 0.5:1 in molarity, respectively. The optimum mixing ratio of glucosamine and glutaraldehyde was found to be 3:1 using thin layer chromatography based on the production of complex. Glucosamine-glutaraldehyde cross-linked complex (Ggcc) revealed significant antimicrobial activity toward PWG than F1, both microbial strains were isolated from porcine semen as antibiotics resistance bacteria (ARB). These results clearly demonstrate that Ggcc has potential bactericidal activity toward ARB in porcine semen.

• 한국환경복원기술학회지
• /
• 제5권6호
• /
• pp.37-42
• /
• 2002

This study has been performed to investigate the physical and mechanical characteristics of compaction, volume change and compressive strength for reinforced soil mixed with polypropylene fiber, and to confirm the reinforcing effects with admixture such as polypropylene fiber. To this end, a series of compaction test and compression test was conducted for clayey soil(CL) and polypropylene fiber reinforced soil. In order to determine proper moisture contents and mixing ratio, pilot test was carried out for natural soil and PFRS(polypropylene fiber reinforced soil). And the mixing ratio of mono-filament fiber and fibrillated polypropylene fiber admixture was 0.1%, 0.3%, 0.5% and 1.0% by the weight of dry soil. From the experimental results, it was found that the optimum moisture contents(OMC) increased with the mixing ratio of fiber, but the maximum dry unit weight and the volume change was decreased with the mixing ratio. It means that the improvement of the workability and the reduction of the weight of embankment was done by the addition of the polypropylene fiber. And, from the compression test results, it was found that the addition of the polypropylene fiber remarkably improved the compressive strength of PFRS. And it was observed in the viewpoint of strength that the fibrillated polypropylene fiber reinforced soil was more effective than the mono-filament polypropylene fiber reinforced soil.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.210-217
• /
• 2011

In results of accomplishing fundamental study to improve the flocculant-mixing of the Flash-Mixer in Onsan Water-Treatment Plant at the small cost, We obtained 8.9% of mixing-efficiency from the field data and 3.2% of the characteristic flow-ratio as the available maximum volume-ratio in this Water-Treatment Plant. The optimum elements with the deflector diameter of 400 mm and deflector angle of $145^{\circ}$ at the flow ratio of 3.2% could be obtained from the expanded study on the ground of the fundamental study. Finally, the efficiency could be improved about 510% from 8.9% to 45.4% and the average turbidity could be improved about 14%.

• 한국식생활문화학회지
• /
• 제20권1호
• /
• pp.61-67
• /
• 2005

The purpose of study was to determine the organoleptic characteristics of homemade basil-pasta made in various compounding ratio according to central composite design. The optimum mixing condition for basil-pasta was optimized by response surface methodology. The texture, including color, flavor, elasticity and overall quality, was measured as sensory evaluation. The optimum mixing rates of durum wheat semolina, basil and egg were 73.97g, 5.95g and 36.17g for color, 53.14g, 4.52g and 35.85g for flavor, 48.75g, 2.95g and 36.85g for elasticity. The organoleptic overall quality of basil-pasta showed the maximum score in the mixing condition of 55.52 g durum wheat semolina, 4.55g basil paste and 35.51g egg.

• 대한토목학회논문집
• /
• 제32권1C호
• /
• pp.17-25
• /
• 2012

석탄회를 주재료로 사용한 저강도 고유동화재는 다짐이 필요없고 재굴착이 용이한 고유동성의 재료로 개발되었다. 본 연구에서는 이를 구조물 뒤채움용으로 사용하기 위해 경량화에 초점을 맞춘 기포를 혼입한 경량기포 저강도 고유동화재의 기초연구로써 최종비빔시간, 기포의 희석비에 따른 공학적 특성을 규명하여 최적비빔시간 및 최적희석비를 결정하였다. 기준 배합비를 중심으로 최종비빔시간과 희석비에 따라 플로우 시험, 기포슬러리의 단위중량측정 시험 및 일축압축강도 시험을 실시하였다. 시험결과, CASE N(최종비빔 4분, 희석비 2%), CASE O(최종비빔 4분, 희석비 3%)가 유동성(20cm 이상), 경량성(12~15 $kN/m^3$) 및 일축압축강도(800~1200kPa) 기준을 만족하는 것으로 나타나 이를 기준으로 구조물 뒤채움용 경량기포 CLSM재료를 제작 및 사용함에 있어서 참고가 될 수 있을 것으로 판단된다.

• 한국식품과학회지
• /
• 제40권4호
• /
• pp.406-411
• /
• 2008

본 연구는 청국장의 품질을 향상시키고 최적화시키기 위해 경기도 이천에서 높은 효소가를 가진 균주를 분리 동정하며 선택된 균주들을 이용하여 최적배합비를 산출하고자 하였다. 16S rDNA와 PCR을 이용하여 균주를 동정한 결과, 39개의 균주 대부분이 B. subtilis와 B. licheniformis이었으며 곰팡이는 검출되지 않았고 그 중 5개의 균주가 높은 역가를 나타내었다. 고품질의 장류생산 및 최적화 공정을 확립하기 위해 분리 동정한 균주중에서 amylase, protease, lipase와 cellulase의 활성이 높은 균주를 3개 선택하여 최적화 공정작업에 이용하였고 실험법에 의해 청국장을 제조하였다. 암모니아태질소, 선호도, 아미노태질소 및 항산화가에 근거를 두어 contour map과 numerical 최적화를 한 결과, 50%의 Bacillus sp. SC-l과 50% SC-3을 섞었을 때 최적의 청국장이 만들어졌다.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.508-514
• /
• 2004

Industrial and municipal wastewater treatment plants produce large amounts of sludge cakes for final disposal. This problem is an inevitable drawback inherent to the activated sludge process. Both the reduction of the amount of sludge produced and improvement of its dewaterability are presently very important issue also in Korea. So many pre-treatment processes have been developed in order to improve sludge dewatering efficiency. In this study the effects of hydrogen peroxide and paper sludge mixing processes were considered as reasonable alternatives to enhance sludge dewaterability. The CST of sludge was significantly decreased, and dewaterability improved by hydrogen peroxide oxidation treatment. The optimum dosage of hydrogen peroxide was proved to be 10mg/g-TS (when TS of sludge was 2%) with the conditions of pH 4 and only 1~2 minutes of reaction time. The mixing of paper sludge with sewage sludge was turned out to be very effective in reduction of sludge cake; 30% of sludge cake reduction was accomplished. Optimum mixing ratio of paper sludge was about 30%(v/v). This process also could save 25% of polymer to be required. These two alternatives are somewhat realistic, but it was concluded that paper sludge mixing process will be the best choice.