• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.159-165
• /
• 2021

Electronic devices used in the mobile environments fabricated under the plasma conditions in high vacuum system. Especially for the development of advanced electronic devices, high quality plasma as the process conditions are required. For this purpose, the variable conductance throttle valves for controllable plasma employed to the high vacuum system. In this study, we analyzed the effects of throttle valve applications on vacuum characteristics simulated to obtain the optimum design modelling for plasma conditions of high vacuum system. We used commercial simulator of vacuum system, VacSim(multi) on this study. Reliability of simulator verified by simulation of the commercially available models of high vacuum system. Simulated vacuum characteristics of the proposed modelling agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve schematized as the modelling of throttle valve for the constant process-pressure of below 10-3 torr. Simulation results plotted as pump down curve of chamber, variable valve conductance and conductance logic of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably in plasma process.

• Nuclear Engineering and Technology
• /
• 제23권4호
• /
• pp.426-437
• /
• 1991

SNU 1.5-MV 직렬형 반데그라프 가속기의 $He^{++}$ 빔 수송계를 이온광학적으로 분석하였다. 각 이온광학요소의 최적운전조건을 결정하고, 이온빔 수송을 모사하기 위하여 프로그램 OPTRANS를 개발하였다. 일차행렬법을 사용하였으며, 공간전하효과는 무시하였다. 프로그램 OPTRANS를 사용하여 0.5~3.0 MeV $He^{++}$ 빔 수송을 위한 최적운전조건을 결정하였다. 초기 이온빔의 방사면량은 인출전극의 구조와 이온빔 인출실험에 의해 0.5$\times$80.0 mm.mrad으로 가정하였다. 운전조건의 변화에 따른 각 이온광학요소의 이온빔 수송 특성을 검토하였으며, 각 Slit과 Stripping Foil, 그리고 표적에서 빔 크기가 최소로 되도록 하는 운전조건을 계산하였다. 이온빔 수송 실험으로부터 얻어진 최적운전조건은 계산된 값과 오차 범위 15% 내에서 일치하였다. 이온빔 수송 모사와 실험을 통해, 계산된 최적운전조건의 타당성 및 프로그램 OPTRANS의 유용성을 입증하였다.

• 한국식품과학회지
• /
• 제29권4호
• /
• pp.776-783
• /
• 1997

전통적인 볶음방법으로 제조되고 있는 둥굴레차의 고품질화를 위하여 반응표면분석법에 의한 볶음조건을 최적화하였다. 둥굴레차의 품질지표로서 수용성 고형분, 갈색도, 페놀성 성분 및 전자공여 작용은 $145^{\circ}C$와 55분에서 나타나는 능선까지는 볶음온도와 시간이 증가함에 따라 증가하였으나 그 이상의 온도와 시간에서는 다시 줄어들었다. 둥굴레차의 관능적 품질로서 전반적인 기호도는 최대 관능평점을 나타낸 $146^{\circ}C$와 52분까지는 볶음온도와 시간이 증가할수록 높아졌으나, 최대점을 지나서는 온도가 높아지고 시간이 경과함에 따라 점점 줄어들었다. 이상과 같이 각각의 볶음조건에 따른 둥굴레차의 품질 특성을 종합하여 superimposed contour map을 작성한 결과 볶음온도 $135{\sim}140^{\circ}C$, 볶음시간 $58{\sim}64$분이 둥굴레차의 품질을 극대화시킬 수 있는 최적 볶음조건 범위로 나타났으며, 최적조건 범위내의 주어진 볶음조건$(137^{\circ}C,\;60\;min)$에서의 실험치는 예측치와 일치하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.78-90
• /
• 2012

Soybean hull is an attractive feedstock for glucose production. To increase the glucose conversion in acid hydrolysis, a pretreatment method combined steam explosion with alkali pretreatment for soybean hull was studied. For first step pretreatment, steam explosion conditions (log Ro 2.45) were optimized to obtain maximum solid recovery and cellulose content. In the second step pretreatment, the conditions for potassium hydroxide pretreatment of steam exploded soybean hull were optimized by using RSM (response surface methodology). The optimum conditions for minimum lignin content were determined to be 0.6% potassium hydroxide concentration, $70^{\circ}C$ reaction temperature and 198 min reaction time. The predicted lignin content was 2.2% at the optimum conditions. Experimental verification of the optimum conditions gave the lignin content in similar value with the estimated value of the model. Finally, glucose conversion of pretreated soybean hull using acid hydrolysis resulted in $97.1{\pm}0.4%$. This research of two-step pretreatment was a promising method for increasing the glucose conversion in the cellulose-to-glucose process.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.87-93
• /
• 1994

This paper describes on the establishment of an optimal internal grinding conditions for the purpose of improving the grinding efficiency against to the high-speed grinding. Through the fundamental grinding tests for the brittle and hardened material, we are concluded that high-speed internal grinding is effective to improve the grinding accuracy as well as the grinding efficiency. The obtained results are as follows: (1) Under the speed ratio $(V_w/V_g)$ is constant, it is possible to increase the grinding efficiency with satifying the constraint conditions. (2) Increasing the wheel velocity, surface roughness and out-roundness are improved. (3) Under the wheel depth of cut is constant and increasing the speed ratio, workpiece residual stress is decreased. The described method, in this paper, is capable of determining the optimum internal grinding conditions taking into account some constraint conditions, and practical algorithm for optimum internal grinding conditions are presented.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.54-59
• /
• 2007

Cereal, computer software, wine, small appliances, and fast foods are examples of products that have switched from folding carton to microflute corrugated paperboard. Microflute corrugated paperboards have their unique wonderful packaging characteristics that are driving forces for people to use more and more. Good strength property, excellent shock absorbing ability, and beautiful outer appearance of microflute corrugated paperboards go hand and hand with their environmental advantages. It is known that physical properties of microflute corrugated paperboards depend on not only properties of base paper but corrugator operating conditions. This study was carried out to investigate on the corrugator's optimum operating conditions for making micro flute corrugated paperboards. Lab-scaled micro flute corrugator was installed and run with systematic changes of operation conditions to investigate the effects of operation conditions on physical properties of micro flute corrugated paperboards.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 2002년도 학술대회지
• /
• pp.491-501
• /
• 2002

A cross-examination between KT&G Central Research Institute and Guangzhou Institute for Drug Control was carried out in order to select optimum conditions for extraction, separation and determination of ginsenosides in red ginseng and to propose a better method for the quantitative analysis of ginsenosides. The optimum extraction conditions of ginsenosides from red ginseng were as follows: the extraction solvent, $70\%$ methanol; the extraction temperature, $100^{\circ}C;$ the extraction time, 1 hour for once; and the repetition of extraction, twice. The optimum separation conditions of ginsenosides on the SepPak $C_{18}$ cartridge were as follows: the loaded amount, 0.4 g of methanol extract; the washing solvents, distilled water of 25 ml at first and then $30\%$ methanol of 25 ml; the elution solvent, $90\%$ methanol of 5 ml. The optimum HPLC conditions for the determination of ginsenosides were as follows: column, Lichrosorb $NH_2(25{\times}0.4cm,$ 5${\mu}m$, Merck Co.); mobile phase, a mixture of acetonitrile/water/isopropanol (80/5/15) and acetonitrile/water/isopropanol (80/20/15) with gradient system; and the detector, ELSD. On the basis of the optimum conditions a method for the quantitative analysis of ginsenosides were proposed and another cross-examination was carried out for the validation of the selected analytical method conditions. The coefficient of variances (CVs) on the contents of ginsenoside-$Rg_{1}$, -Re and $-Rb_1$ were lower than $3\%$ and the recovery rates of ginsenosides were $89.4\~95.7\%,$ which suggests that the above extraction and separation conditions may be reproducible and reasonable. For the selected HPLC/ELSD conditions, the CVs on the detector responses of ginsenoside-Rg, -Re and $-Rb_1$) were also lower than $3\%$, the regression coefficients for the calibration curves of ginsenosides were higher than 0.99 and two adjacent ginsenoside peaks were well separated, which suggests that the above HPLC/ELSD conditions may be good enough for the determination of ginsenosides.

• KSBB Journal
• /
• 제13권5호
• /
• pp.547-553
• /
• 1998

For the efficient production of a new exo-polysaccharide from Ganoderma lucidum ASI 7004, the optimum conditions and methods in submerged cultivation were investigated with an airlift fermenter system. The optimum aeration rate was 2.5 Wm at the initial pH 5.0 and 28$^{\circ}C$. The increase of dissolved oxygen concentration by pure oxygen supply during cultivation did not improved the exo-polysaccaride production and the mycelial growth. The maximum exo-polysaccharide production and the mycelial growth under the optimum culture condition were obtained in media of glucose 60g/L, yeast extract 6g/L, (NH4)2HPO4 1g/L and KH2PO4 0.5g/L. Under these optimum medium and culture conditions, about 7.15g/L of exo-polysaccharide and 13.9g/L of mycelial growth were producted, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.438-444
• /
• 2001

The objective of this study is to provide a simple methodology to find optimum processing conditions to fabricate sub-micron structured DVD-RAM substrates with superb optical and geometrical properties. It was found that the birefringence, which is regarded as one of the most important optical properties for an optical disk, was very sensitive to the mold wall temperature history. Also, the integrity of the replication, represented by the land-groove structure and the radial tilt were influenced by the mold temperature and the compression pressure. A set of optimum conditions were obtained by applying Design of Experiment and the objective functions composed of three different objectives.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.103-112
• /
• 1995

This study was performed to optimize friction welding conditions of Cr-Mo steel bars used for hydraulic of pneumatic valve spools and to realize the real-time evaluation of weld quality by acoustic emission method. SNCM220, SCM435, SCAM645, and SCM415 steel bars were tested to find optimum conditions of friction welding. Auantitative equations which exhibit the relations of tensile strength, elongation, reduction of area and energy absorption with friction heating time were obtained by the experiment. Acoustic emission was also performed in the friction weldig process, and the real-time evaluation was enabled to find the optimum range of weld strength. Finally, the strength and toughness of welded joints were interpreted by the sem analysis of tensile fracture surfaces.