• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.865-873
• /
• 2013

The deep drawing and ironing (DDI) process involving the use of a high-capacity horizontal press is used for manufacturing acompressed natural gas (CNG) pressure vessel. However, some variables of the DDI process have been determined based on the experiences of workers, and the short die life needs to be improved for manufacturing the pressure vessel withhighquality and lowcost. In this study, process variables such as the draw ratio, distance between dies, radius of rounding of drawing die, and angle of ironing die are chosen to enhance the reliability and improve the die life based on previous studies and experiences. The draw ratio limits at which no tearing or wrinkling occurs are determined using FEA, and the distances between dies, radius of rounding of drawing die, and angle of ironing die are optimized by the DOE method. The results of the optimal process variables are compared with those of the existing DDI process for verifying their effectiveness.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.4
• /
• pp.169-175
• /
• 2014

Digital ink-jet printing system has many advantages such as fast and fine printing of various images, high efficiency and low cost process. Generally digital ink-jet printing requires ceramic pigments of cyan, magenta, yellow and black with thermal and glaze stability above $1000^{\circ}C$ for the application of porcelain product design. In this study, pink-red colored $CaO-SnO_2-Cr_2O_3-SiO_2$ pigment was synthesized using solid state reaction. The synthesis conditions of $Ca(Cr,Sn)SiO_5$ pigment such as annealing temperature, amount of mineralizer and non-stoichiometric composition were optimized. Crystal structure and morphology of the obtained $Ca(Cr,Sn)SiO_5$ pigment were analyzed using XRD, SEM, PSA, FT-IR and effect of Cr substitution on the pigment color was analyzed using Uv-vis. spectrophotometer and CIE $L^*a^*b^*$ measurement.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.54.3-54.3
• /
• 2015

To probe the star formation in local and early Universe, the NISS with a capability of imaging spectroscopy in the near-infrared is being developed by KASI. The main scientific targets are nearby galaxies, galaxy clusters, star-forming regions and low background regions. The off-axis optical design of the NISS with 15cm aperture was optimized to obtain a wide field of view (FoV) of $2deg.{\times}2deg.$ as well as a wide spectral coverage from 0.9 to $3.8{\mu}m$. The opto-mechanical structure was designed to be safe enough to endure in both the launching condition and the space environment. The dewar will operate $1k{\times}1k$ infrared sensor at 80K stage. The NISS will be launched in 2017 and explore the large areal near-infrared sky up to $200deg.^2$ in order to get both spatial and spectral information for astronomical objects. As an extension of the NISS, KASI is planning to participate in a new small space mission together with NASA. The promising candidate, SPHEREx (Spectro-Photometer for the History of the Universe Epoch of Reionization, and Ices Explorer) is an all-sky survey satellite designed to reveal the origin of the Universe and water in the planetary systems and to explore the evolution of galaxies. Though the survey concept is similar to that of the NISS, the SPHEREx will perform the first near-infrared all-sky imaging spectroscopic survey with the wider spectral range from 0.7 to $5{\mu}m$ and the wider FoV of $3.5deg.{\times}7deg.$ Here, we report the current status of the NISS and introduce new mission for the near-infrared imaging spectroscopic survey.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.6
• /
• pp.789-798
• /
• 2013

In the present study, optimization on ${\beta}$-glucanase-assisted extraction was made in order to isolate waxy barley starch from domestic cultivar using the D-optimal design suitable for response surface methodology (RSM). The results demonstrated that the amount of enzyme was found to be a major influencing factor on the extraction yield, which was substantially increased by increasing the amount of enzyme. It was also influenced by the reaction time and amount of water addition; however, the two factors were less influential than the amount of enzyme. The optimized condition by RSM for the reaction time was found to be 2.63 hours and amount of enzyme 1.7%, and amount of water addition 4.38 times the weight of raw material. With the enzyme treatment, the starch content in residues (R), particularly in R1 and R5, was reduced considerably, resulting in an increase in the extraction yield and therefore primarily and effectively releasing B-type starch small granule confirmed by scanning electronic microscopy. In addition, the study determined the physicochemical properties of isolated waxy starch (i.e., purity, water adsorption capacity, thermal properties, rheology and starch morphology) and compared them with those from the enzyme-not treated sample. It was found that they were almost similar to each other, except for the purity of starch, which was lower in the enzyme-treated sample than in the enzyme-not treated one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.55-55
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility (${\sim}900cm^2/Vs$). These electronic properties allow high breakdown voltage, high frequency, and high temperature operation compared to Silicon devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances. the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. In this paper, we report the effect of the interface states ($Q_s$) on the transient characteristics of SiC DMOSFETs. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. The result is a low-loss transient characteristic at low $Q_s$. Based on the simulation results, the DMOSFETs exhibit the turn-on time of 10ns at short channel and 9ns at without the interface charges. By reducing $SiO_2/SiC$ interface charge, power losses and switching time also decreases, primarily due to the lowered channel mobilities. As high density interface states can result in increased carrier trapping, or recombination centers or scattering sites. Therefore, the quality of $SiO_2/SiC$ interfaces is important for both static and transient properties of SiC MOSFET devices.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.59-64
• /
• 2002

In the RFID system using ISM-band, The tag mounted at the object has used the DC power by rectifying the RF signals of the small antenna for operating the micro-controller and memory. The performance of the tag would be reduced because of the second harmonics generated by the nonlinearity of the semiconductor and the spurious signal excited the high order mode of the antenna. This paper has realized the novel type low-pass filter with "the Stub-I type DGS slot structure" to improve the efficiency of the tag by suppressing the harmonics. The optimized frequency character at the pass-band/stop-band has obtained by tuning the stub width and slit width of I type slot. The measured result of the LPF has the cutoff frequency 3.25 GHz, the insertion loss about -0.29~-0.3 dB at pass-band 2.4 GHz~2.5 GHz, the return loss about -27.688~-33.665 dB at pass-band with a good performance, and the suppression character is about -19.367 dB at second harmonics frequency 4.9 GHz. This DGS LPF may be applied the various application as the RFID, WLAN to improve the efficiency of the system by suppressing the harmonics and spurious signals. 

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.71-76
• /
• 2008

H.264(or MPEG-4/AVC pt.10) is a high performance video coding standard, and is widely used. Variable length code (VLC) of the H.264 standard compresses data using the statistical distribution of values. A decoder parses the compressed bit stream and searches decoded values in lookup tables, and the decoding process is not easy to implement by hardware. We propose an architecture of variable length decoder(VLD) for the H.264 baseline profile(BP) L4. The CAVLD decodes syntax elements using the combination of arithmetic units and lookup tables for the optimized hardware architecture. A barral shifter and a first 1's detector parse NAL bit stream, and are shared by Exp-Golomb decoder and CAVLD. A FIFO memory between CAVLD and the reorder unit and a buffer at the output of the reorder unit eliminate the bottleneck of data stream. The proposed VLD is designed using Verilog-HDL and is implemented using an FPGA. The synthesis result using a 0.18um standard CMOS technology shows that the gate count is 22,604 and the decoder can process HD($1920{\times}1080$) video at 120MHz.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.17-22
• /
• 2016

Flexible organic light-emitting diode (OLED) devices consist of multi-stacked thin films or layers comprising organic and inorganic materials. Due to thermal coefficient mismatch of the multi-layer films, warpage of the flexible OLED is generated during high temperature process of each layer. This warpage will create the critical issues for next production process, consequently lowering the production yield and reliability of the flexible OLED. In this study, we investigate the warpage behavior of the flexible OLED for each bonding process step of the multi-layer films using the experimental and numerical analysis. It is found that the polarizer film and barrier film show significant impact on warpage of flexible OLED, while the impact of the OCA film on warpage is negligible. The material that has the most dominant impact on the warpage is a plastic cover. In order to minimize the warpage of the flexible OLED, we estimate the optimal material properties of the plastic cover using design of experiment. It is found that the warpage of the flexible OLED is reduced to less than 1 mm using a cover plastic of optimized properties which are the elastic modulus of 4.2 GPa and thermal expansion coefficient of $20ppm/^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1163-1170
• /
• 2016

A hardware implementation of ultra-lightweight block cipher algorithm PRESENT which was specified as a standard for lightweight cryptography ISO/IEC 29192-2 is described. The PRESENT crypto-processor supports two key lengths of 80 and 128 bits, as well as four modes of operation including ECB, CBC, OFB, and CTR. The PRESENT crypto-processor has on-the-fly key scheduler with master key register, and it can process consecutive blocks of plaintext/ciphertext without reloading master key. In order to achieve a lightweight implementation, the key scheduler was optimized to share circuits for key lengths of 80 bits and 128 bits. The round block was designed with a data-path of 64 bits, so that one round transformation for encryption/decryption is processed in a clock cycle. The PRESENT crypto-processor was verified using Virtex5 FPGA device. The crypto-processor that was synthesized using a $0.18{\mu}m$ CMOS cell library has 8,100 gate equivalents(GE), and the estimated throughput is about 908 Mbps with a maximum operating clock frequency of 454 MHz.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.381-388
• /
• 2017

This study was performed to evaluate the effects of Liriopis tuber (SLT) extracts on cookie production conditions for reduction of sugar usage through response surface methodology (RSM). The experimental conditions were designed according to the central composite design with 17 experimental points, including three replicates for three independent variables such as the amounts of SLT extracts, butter, and sugar. The experimental data on quality and sensory evaluation of cookies were fitted with various models, and accuracy of the equations was analyzed by ANOVA. Among various responses, spread ratio, sugar content, lightness, redness, hardness, and sensory properties of color, texture, sweetness, appearance, and overall quality showed significant correlations with the contents of three independent variables. From these results, the optimum formulation of cookies for reduced usage of sugar was calculated as SLT extract 6.84 g, butter 47.20 g, and sugar 36.02 g. Optimized cookies showed improved sensory properties but no difference in sweetness compared to control cookies.