• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.3
• /
• pp.821-832
• /
• 2015

The aims of this study are to estimate the optimal vessel reduction scales and these direct economic effects of coastal and offshore fisheries in the Republic of Korea. To estimate respectively optimal fishing efforts of individual fishery by species in coastal and offshore fisheries, we adopted appropriate fishing power of each species published by National Fisheries Research and Development Institute and also considered biological and socio-economic factors such as the bycatch rate, the profit rate, the efficiency of resource use, the average age of fishing vessel, the intention of vessel reduction, and the annual changes in vessels by other factors. The direct economic effects of the optimal vessel reduction in coastal and offshore fisheries based on maximum sustainable yield and 2/3 maximum sustainable yield was calculated by a cost-benefit analysis. This study showed that optimal reduction numbers of vessels engaged in coastal and offshore fisheries were 4,431 and 374 vessels and the direct economic effects in coastal and offshore fisheries were about 371.7 and 569.4 billion won and these NPV and BCR were 111.7 billion won and 1.65 and 342.6 billion won and 4.97 respectively.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.6
• /
• pp.456-460
• /
• 1996

Recombinant Pseudomonas lipase was used to study protein aggregation and adsorption upon in vitro refolding. Protein adsorption as well as aggregation was responsible for major side reactions upon in vitro refolding as a function of protein concentration. The optimal range of protein concentration was determined by the relative contribution of protein aggregation and adsorption. Above the optimal range, the yield of active lipase inversely correlated with protein aggregation, showing a competition between folding and aggregation. However, adsorption of protein rather than protein aggregation is thought to contribute as a major side reaction of the refolding process at sub-optimal concentrations at which the formation of aggregates should be more reduced. Protein aggregation was influenced by the amount of guanidine hydrochloride in the refolding solvent. The refolding temperature was a critical factor determining the extent of protein aggregation. The refolding yield was also affected by the dilution fold and dilution mode, which suggests that the refolding process might kinetically compete with the rate of mixing.

• Food Science and Preservation
• /
• v.30 no.5
• /
• pp.857-867
• /
• 2023

In this study, the extraction yield, acidic polysaccharides and ginsenosides of red and black ginseng were optimized by using the response surface methodology in consideration of the ethanol concentration and temperature of the extraction. The R² of the model formula for the yield, acidic polysaccharides and ginsenosides was 0.8378-0.9679 (p<0.1). An optimal extraction yield of 5.29% was reached for red ginseng soluble solids when 1.52% ethanol concentration was used at a temperature of 67.27℃. Additionally, the optimal extraction yield for black ginseng soluble solid was 6.11% when 3.12% ethanol concentration was used at a temperature of 66.13℃. Furthermore, the optimal conditions for extracting acidic polysaccharides from red ginseng were using an ethanol concentration of 4.03% at a temperature of 69.61℃; a yield of 1.86 mg/mL was obtained. The optimal extraction yield for acidic polysaccharides from black ginseng was 1.80 mg/mL when extracted using a concentration of 24.67% of ethanol at a temperature of 71.14℃. An optimal extraction yield of 0.22 mg/mL was reached for ginsenoside Rg₁ from red ginseng when 79.92% ethanol concentration was used at a temperature of 70.62℃. The optimal extraction yield of ginsenoside Rg₃ from black ginseng was 0.31 mg/mL when ethanol was used at a concentration of 75.70% at a temperature of 65.49℃. The ideal extraction conditions for obtaining the maximum yield of both acidic polysaccharide and ginsenoside from red and black ginseng were using ethanol at a concentration between 35 and 50% at an extraction temperature of 70℃.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.311-322
• /
• 2005

Fisheries buyback programs in Korea have been implemented since 1994, and their scales are estimated to be the present value of 930 billion won for the last 9 yens since 1994. The paper attempts to identify the patterns of each fish species, of which their yields can be steadily increased or significant]y decreased, and to evaluate its effective level and the optimal level for buyback programs by means of fishing capacity analysis. The paper distinguishes fish species, that there is no need to reduce the fishing efforts, such as anchovies, mackerels, squids, Spanish mackerels, and herrings, because MSY exceeds yields, from fish species to control overfishing such as file fish, yellow corvenias, young pollack, hair tail, snow crab, and pollack. The paper also suggests that 65% of the fishing efforts (total tonnages) should be cut back at the national aggregate level in order to restore fish stocks.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.2
• /
• pp.107-115
• /
• 1992

Many manufacturing processes involved in the fabrication and assembly of hightech components have highly variable yields that tend to complicate the production control. Under this random yield situation we develop a model to determine optimal input quantity, mean waiting time in the system and variance of waiting time in the system. An example which considers beta distribution as a yield distribution is given.

• IE interfaces
• /
• v.20 no.1
• /
• pp.87-93
• /
• 2007

Burn-in is an engineering method for screening out products containing reliability defects which would cause early failures in field operation. Previously, various burn-in models have been proposed mainly focused on the trade-off of shop repair cost and warranty cost ignoring manufacturing yield. From the view point of a manufacturer, however, burn-in decreases warranty cost at the expense of yield reduction. In this paper, we provide a general model quantifying a trade-off between product yield and reliability, in which any defect distribution from previous yield models can be used. A profit function is expressed in burn-in environments for determining an optimal burn-in time. Finally, the method is illustrated with gate oxide failures which is an important reliability concerns for VLSI CMOS circuits.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.439-446
• /
• 2003

Various volume of water for the optimal brewing condition of the Korean distilled liquor produced by liquefaction of rice and corn starch was investigated Pilot brewings were carried out by the liquefaction of 5kg of rice and 10kg of corn starch with 150%, 200% and 250% of water regarding the amount of rice and corn starch. The pH, alcohol production and total acidity were normal during the fermentation process. The yield was proportional to the amount of water added and the highest yield was obtained by 250% of water addition without loss of quality. All the test results were not significantly different by the one-way ANOVA and Duncan's multiple range test at p<0.05 and the flavor profiles were also not different according to the amount of water added. As a result, 250% of water addition was the most economical and optimal brewing condition in this study.

• The Journal of Fisheries Business Administration
• /
• v.39 no.2
• /
• pp.25-39
• /
• 2008

The Korean government is in the establishment process of plan for managing fishing effort by setting up the maximum fishing gear usage per fishery type for the recovery of fishery resources, for the settlement of disputes between fishery sectors over fishing gears, and for the stability of fishing business condition. Especially in the setting up of the maximum fishing gear usage, economic standards as well as biological standards are being considered as a significant factor to promote the sustainable and economically viable development of fisheries. This study is, thus, to analyze the optimal economic fishing gear usage ($E_{MEY}$) as the most economically efficient one for the coastal snow crab gillnet fishery, one of the most controversial sectors in establishing the maximum fishing gear usage. The data of logbooks per trip were used for concentrating on the estimation of $E_{MEY}$ per trip because it was considered there were limitations of data available for analyses. As a finding drawn from the analyses, the optimal economic trap usage ($E_{MEY}$) of coastal snow crab gillnet vessels per trip has to be decreased by about 13%. That is, reducing the trip gillnet usage up to the level of $E_{MEY}$ can lead to the reduction of trip fishing costs, thereby resulting in the increased trip profits.

• Structural Engineering and Mechanics
• /
• v.81 no.6
• /
• pp.677-689
• /
• 2022

Generally, the goal of seismic retrofit design of an existing structure using energy dissipation devices is to determine the optimum design parameters of a retrofit device to satisfy a specified limit state with minimum cost. However, the presence of multiple parameters to be optimized and the computational complexity of performing non-linear analysis make it difficult to find the optimal design parameters in the realistic 3D structure. In this study, genetic algorithm-based optimal seismic retrofit methods for determining the required number, yield strength, and location of steel slit dampers are proposed to retrofit an asymmetric soft first-story structure. These methods use a multi-objective and single-objective evolutionary algorithms, each of which varies in computational complexity and incorporates nonlinear time-history analysis to determine seismic performance. Pareto-optimal solutions of the multi-objective optimization are found using a non-dominated sorting genetic algorithm (NSGA-II). It is demonstrated that the developed multi-objective optimization methods can determine the optimum number, yield strength, and location of dampers that satisfy the given limit state of a three-dimensional asymmetric soft first-story structure. It is also shown that the single-objective distribution method based on minimizing plan-wise stiffness eccentricity turns out to produce similar number of dampers in optimum locations without time consuming nonlinear dynamic analysis.

• The Korea Journal of Herbology
• /
• v.29 no.6
• /
• pp.1-6
• /
• 2014

Objectives : This study was aimed to compare Gyejibokryeong-hwan (GBH) decoctions produced using different pressure levels for various extraction times to find the optimal extraction conditions through extraction yield, total soluble solids content (TSSC), hydrogen ion concentration (pH), and the contents of chemical compounds. Methods : Decoctions of GBH were prepared under the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min using water as extraction solvent. The extraction yield, TSSC, and pH were measured, and the amounts of the chemical compounds were determined using high performance liquid chromatography-photodiode array detector. Results : The higher pressure and longer extraction time increased the values of TSSC and extraction yield, while decreased the pH value. The decoctions produced in 180 min by pressurized method and produced in 150 min by non-pressurized method showed maximum values of extraction yield and TSSC with minimum value of pH. The amounts of chemical compounds showed variations in pressurized and non-pressurized decoction during overall extraction times. The influences of pressure and extraction time on extraction yield, TSSC, pH, and the contents of chemical compounds were confirmed by regression analysis, which showed that all extraction values were significantly affected by at least one of two extraction factors, pressure and extraction time. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GBH decoctions. However, optimal extraction conditions could not be chosen due to the variation of the amounts of chemical compounds.