• 대한인간공학회지
• /
• 제15권2호
• /
• pp.113-124
• /
• 1996

This study was initiated to suggest the optimal size intervals for mail-order clothing. The questionnaire survey was carried at 360 women and 50 men who purchased apparels by mail-order. The garment sizes providing at the various mail-order companies in Korea were compared. The garment sizes that consumers wanted to purchase were also investigated. The collected data were analyzed and optimal size intervals for mail-order clothing were decided by the loss function. The results are as follow. 1) The optimal size intervals were varied from 4cm to 7cm. The total expected loss of the apparel sizes suggested in this study was less than that of the current mail-order apparel sizes. When the number of sizes for mail-order clothing is increased, the expected loss was reduced considerably. 2) The mail-order clothing is made for consumers with average body size. 30 The number of garment sizes available by mail-order was under three. 4) Subjects tend to select larger size garments, when the right size garments are not available.

• 한국패션뷰티학회지
• /
• 제4권2호
• /
• pp.22-30
• /
• 2006

This study was done to establish clothing sizing system which can provide good fitting of apparel and minimize the loss due to excess inventory. One demensional mesurments(R. Martin) were made with the subjects, who were girls aged 11 to 12 living in Pusan and Kyungnam. Further the above-said mesurements were used to determine optimal clothing sizes using loss function for establishment of clothing sizing system. According to the results, optimal sizes of upper clothing for the late elementary schoolgirls should include 7 sizes, which will include heightbust circumferencesleeve length. And optimal sizes of lower clothing for the late elementary schoolgirls should include 7 sizes, which will include heightbust circumferencehip circumference.

• 응용통계연구
• /
• 제13권2호
• /
• pp.207-224
• /
• 2000

모집단을 집략화하여 층화 2-단 표본 추출을 할 때에 일반적으로 집락의 크기는 정해져 있다. 그러나 집락이 아파트 단지 등과 같은 경우에 집락의 크기는 큰 차이를 보인다. 이 경우 집락을 합치거나 또는 분할할 필요가 생긴다. 대 표본조사(large sample survey)에서 행정상 또는 조사 편의상 동질의 원소들이 집락화 되어 있고 집락의 크기를 결정할 필요가 있을 경우가 고려되었으며 본 논문에서는 집락의 최적크기를 결정하는 문제를 다루었다. 또한 주어진 비용 하에서 최적의 일차 추출 단위 수와 최적의 이차 추출 단위 수를 구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.146-148
• /
• 2001

This paper discusses the optimal sizes of BESS. The goal must be optimized electricity charge of the customers-side with choosing the time-of-use rates. Therefore the cost is minimized by BESS installed the customers-side. Feasible ROR that means the ratio of capital costs to economic effect owned the optimal BESS sizes is determined the suitable domestic condition based on the battery cost and power converter system cost. Payback period times can be presented by BESS through the ROR. Multi-Pass Dynamic Programming(MPDP) algorithm is applied to the customer for the optimal sizes determination in this paper. It is to solve the optimal solution under the constraints. To investigate the efficiencies of the constraints, it is applied the typical load curve to the high-voltage customer owned Time-Of-Use(TOU) whether BESS is installed or not. Well, The result is obtained that feasible BESS sizes can be achieved the suitable customers-side of meter through the ROR.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.181-192
• /
• 1995

In this study, we introduce new types of planar 2 degree-of-freedom robot modules resembling the musculoskeletal structure of the human arm with actuation redundancy. First, for the given actuator sizes the performance analysis for the manipulator with redundant actuation and without redundant actuation is performed with respect to maximum load handling capacity, maximum hand velocity, and maximum hand acceleration. Secondly an algorithm which decides optimal actuator sizes for the given operational performances is introduced, and the optimal actuator sizes for a robot module with four redundant actuation are obtained. The algorithms employed in this paper will be useful to analyze the robot performances and to determine the actuator sizes for general robot manipulators.

• 응용통계연구
• /
• 제3권2호
• /
• pp.55-77
• /
• 1990

지금까지의 단일 block size를 전제로 한 E-optimal block design들을 다수 block size로 확 장하는 문제를 종합 정리하고(Lee & Jacroux(1987) 참조), 이를 토대로 기존의 단일 block size를 갖는 block design의 table들을 이용하여 여러 block size의 종류들 중에서 우선 실용 도가 가장 높은 경우인 두 가지 상이한 block size를 갖는 새로운 E-optimal block design의 table을 제작하였음.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.889-902
• /
• 2017

Purpose: The orthogonality and trace optimal properties are desirable for constructing designs of experiments. This article focuses on the determination of the sizes of experiments for the balanced trace optimal resolution-V fractional factorial designs for 2-level factorial designs, which have near-orthogonal properties. Methods: In this paper, first we introduce the trace optimal $2^t$ fractional factorial designs for $4{\leq}t{\leq}7$, by exploiting the partially balanced array for various cases of experimental sizes. Moreover some orthogonality criteria are also suggested with which the degree of the orthogonality of the designs can be evaluated. And we appraise the orthogonal properties of the introduced designs from various aspects. Results: We evaluate the orthogonal properties for the various experimental sizes of the balanced trace optimal resolution-V fractional factorial designs of the 2-level factorials in which each factor has two levels. And the near-orthogonal 2-level balanced trace optimal resolution-V fractional factorial designs are suggested, which have adequate sizes of experiments. Conclusion: We can construct the trace optimal $2^t$ fractional factorial designs for $4{\leq}t{\leq}7$ by exploiting the results suggested in this paper, which have near-orthogonal property and appropriate experimental sizes. The suggested designs can be employed usefully especially when we intend to analyze both the main effects and two factor interactions of the 2-level factorial experiments.

• 대한인간공학회지
• /
• 제11권1호
• /
• pp.39-47
• /
• 1992

This paper considers the problem of determining standard product sizes. A customer, who does not find his size, may purchase rather larger or smaller one, but the purchasing desire decreases as the difference between the required and the prepared increases. Introducing a potential demand distribution and a loss function, which reflects how much the purchasing desire chantes according to the difference, we sormulate the problem and suggest a procedure to determine the optimal standard sizes minimizing the loss. Numerical examples are presented to explain the result.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.918-924
• /
• 2009

As the population of overweight and obese children is rising rapidly around the world, there are many researches on purchasing and wearing children's clothing and optimal sizes, but researches on obese children are still inadequate. This study was carried out on 192 obese children over 75% in BMI. The purpose of the study was to set up the optimal interval of sizing system using the loss function which would be a guide for obese children for selecting ready to wear of suitable size. Introducing a loss function, which reflects how much the purchasing desire changes according to the difference, we formulate the problem and suggest a procedure to determine the optimal standard sizes minimizing the loss. These results were as follows ; In size chart of top's, 4 sizes had been determined by a loss function, had covered more than 91.1% of all subjects. In size chart of bottom's, 5 sizes had been determined by a loss function, had covered more than 87.0% of all subjects.

• 한국농공학회지
• /
• 제28권2호
• /
• pp.42-52
• /
• 1986

This study involves the estimation of optimal ranges of parameters for a linear watershed model. A well-known TANK model was chosen and a linear combination of four tanks assumed. The model was used to simulate daily streamflow for six watersheds of different sizes and by a trial-and-error approach a set of optimal parameters defined. The parameters were related to watershed sizes and land use conditions. Optimal parameters for ungaged conditions were defined from the relationships; daily streamflow simulated and compared to the observed date. The simulated results were in a general agreement with the data.