• 접착 및 계면
• /
• 제13권2호
• /
• pp.58-63
• /
• 2012

탄소섬유강화플라스틱(CFRP)의 홀 가공 시 chip이 발생된다. 이때 발생되는 chip은 단순 폐기용 차원이 아닌 미세탄소섬유와 에폭시의 조성으로 이루어져 있다. Chip을 강화재로 활용하기 위해서는 탄소섬유만의 조성을 이루어야 고분자 기지와 계면접착력이 증가될 수 있다. Chip 내 탄소섬유의 길이를 일정하게 하기 위해 막자 사발을 이용한 절단 과정 후 $H_2O_2$를 이용한 표면처리를 하여 탄소섬유에 붙어있는 에폭시를 제거하였다. Chip을 이용하여 페놀수지를 기지로 한 페놀복합재료를 제조하였으며, 내열성 및 난연성 재료로 활용 가능성을 평가하였다. 기존의 페놀보다 표면처리를 한 chip복합재료가 기계적, 열적 물성이 향상됨을 확인하였으며, 젖음성 평가를 이용하여 표면물성에 따른 재료의 물성을 평가하였다. 불균질한 표면 조성에 의해 표면 거칠기가 달라지기 때문에 페놀복합재료의 접촉각이 증가되었다. 난연성 평가는 ASTM D635-06 방법으로 수행하였다. 평가결과, chip의 첨가 및 표면처리의 영향에 의해 난연성이 향상되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.102-112
• /
• 2020

본 연구에서는 교량구조물에 활용할 수 있는 폭 100mm 이상의 대형 탄소판을 고정할 수 있는 쐐기형 정착구를 설계하기 위해서, 주요설계변수인 쐐기의 각도, 정착블록-쐐기 사이의 마찰계수 등을 기준으로 거동특성을 수치해석방법으로 분석하였다. 설계변수 별로 탄소판의 응력상태를 계산하고, 복합재료 파괴기준에 의하여 정착구의 극한상태에서의 성능을 평가하였고, 이를 바탕으로 정착구의 최적설계 제원을 결정하였다. 실물실험을 통하여 최적설계된 정착구의 성능을 검증하였으며, 본 연구의 결과는 대형 구조물을 보강하기 위한 탄소판 정착구의 최적설계에 활용될 수 있을 것으로 판단된다.

• 한국CDE학회논문집
• /
• 제21권4호
• /
• pp.389-396
• /
• 2016

The necessity for environment-friendly material development has emerged in the recent automotive field due to stricter regulations on fuel economy and environmental concerns. Accordingly, the automotive industry is paying attention to carbon fiber reinforced plastic (CFRP) material with high strength and stiffness properties while the lightweight. In this study, we determine a shape of lower control arm (LCA) for maximizing the strength and stiffness by optimizing the thickness of each layer when the stacking angle is fixed due to the CFRP manufacturing problems. Composite materials are laminated in the order of $0^{\circ}$, $90^{\circ}$, $45^{\circ}$, and $-45^{\circ}$ with a symmetrical structure. For the approximate optimal design, we apply a sequential two-point diagonal quadratic approximate optimization (STDQAO) and use a process integrated design optimization (PIDO) code for this purpose. Based on the physical properties calculated within a predetermined range of laminate thickness, we perform the FEM analysis and verify whether it satisfies the load and stiffness conditions or not. These processes are repeated for successive improved objective function. Optimized CFRP LCA has the equivalent stiffness and strength with light weight structure when compared to conventional aluminum design.

• Smart Structures and Systems
• /
• 제15권6호
• /
• pp.1393-1410
• /
• 2015

An original sensor system based on Fiber Bragg Gratings (FBG) for the strain monitoring of an adaptive wing element is presented in this paper. One of the main aims of the SARISTU project is in fact to measure the shape of a deformable wing for performance optimization. In detail, an Adaptive Trailing Edge (ATE) is monitored chord- and span-wise in order to estimate the deviation between the actual and the desired shape and, then, to allow attaining a prediction of the real aerodynamic behavior with respect to the expected one. The integration of a sensor system is not trivial: it has to fit inside the available room and to comply with the primary issue of the FBG protection. Moreover, dealing with morphing structures, large deformations are expected and a certain modulation is necessary to keep the measured strain inside the permissible measure range. In what follows, the mathematical model of an original FBG-based structural sensor system is presented, designed to evaluate the chord-wise strain of an Adaptive Trailing Edge device. Numerical and experimental results are compared, using a proof-of-concept setup. Further investigations aimed at improving the sensor capabilities, were finally addressed. The elasticity of the sensor structure was exploited to enlarge both the measurement and the linearity range. An optimisation process was then implemented to find out an optimal thickness distribution of the sensor system in order to alleviate the strain level within the referred component.

• 한국융합학회논문지
• /
• 제10권5호
• /
• pp.165-171
• /
• 2019

오늘날 공학과 기술은 스포츠 분야에 많은 영향을 미치고 있다. 스포츠의 속성인 경쟁은 스포츠선수 뿐만이 아니라 스포츠용품에 있어서도 보다 높은 성능을 요구하게 된다. 특히 모터스포츠분야는 성능과 안전이라는 측면에서 오래전부터 스포츠와 기술의 융합이 자연스럽게 이루어지고 있다. 본 연구에서는 모터스포츠와 일반 자동차튜닝 시장을 겨냥한 카본 버킷 시트(Bucket seat)의 개발을 위하여 유한요소해석을 통해 구조강도 평가를 시행하였다. FIA($F\acute{e}d\acute{e}ration$ Internationale de l'Automobile)의 규정을 기본 설계와 강도평가에 적용하였으며, 복합소재의 특성을 고려한 유한요소 모델링과 CFRP 라미네이트(Carbon Fiber Reinforced Plastic Laminate)의 적층각도와 적층수에 따른 시트의 강도를 Tsai-Wu Failure index를 구하여 평가하였다. 해석 결과 3mm의 폼코어를 적용한 $[0^{\circ}/30^{\circ}/60^{\circ}/90^{\circ}/-30^{\circ}/-60^{\circ}]_4$인 적층이 다른 실험조합에 비하여 무게와 강도 면에서 만족할 만한 성능을 나타내고 있어 최적 적층으로 선정하였다.

• Structural Engineering and Mechanics
• /
• 제67권1호
• /
• pp.45-52
• /
• 2018

Several techniques have been developed for shear strengthening of reinforced concrete (RC) members by using fiber reinforced polymer (FRP) composites. However, debonding of FRP retrofits from concrete substrate still deemed as a challenging concern in their application which needs to be scrutinized in details. As a result, this paper reports on the results of an experimental investigation on shear strengthening of RC beams using near surface mounted (NSM) FRP reinforcing bars. The main objective of the experimentation was increasing the efficiency of shear retrofits by precluding/postponing the premature debonding failure. The experimental program was comprised of six shear deficient RC beams. The test parameters include the FRP rebar spacing, inclination angle, and groove shape. Also, an innovative modification was introduced to the conventional NSM technique and its efficiency was evaluated by experimental observation and measurement. The results testified the efficiency of glass FRP (GFRP) rebars in increasing the shear strength of the test specimens retrofitted using conventional NSM technique. However, debonding of FRP bars impeded exploiting all retrofitting advantages and induced a premature shear failure. On the contrary, application of the proposed modified NSM (MNSM) technique was not only capable of preventing the premature debonding of FRP bars, but also could replace the failure mode of specimen from the brittle shear to a ductile flexural failure which is more desirable.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1530-1537
• /
• 1998

Mixture formation is one of the significant factors to improve combustion performance of an spark ignition engine. This is affected by spray and atomization characteristics of injector. In the case of EGI system, air-fuel mixing period is so short that a lot of fuel-film and liquid-fuel flow into cylinder. Since this fuel-film is not burnt perfectly in cylinder, it is exhausted in the form of HC emission. In this paper, three measurement techniques were utilized to measure spray characteristics and the amount of fuel-film in the cylinder. At first, PMAS was used to measure the spray characteristics such as size distributions, SMD, and spray angle. Secondly the amount and distribution of fuel-film which flow into through intake valve could be measured quantitatively using the fuel-film measuring device. And lastly, by optical fiber type spark plug used to detect the diffusion flame, the amount of unburned HC was measured. As the result of these experiments, the information of optimal spray characteristics and injection condition to minimize fuel-film could be built up.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.472-477
• /
• 2009

A Stokes polarimetry imaging (SPI) system was developed and utilized to detect tendon tears by constructing the degree of linear polarization (DOLP) image maps after linearly polarized light illumination. The micro and partial-thickness tears of turkey tendons were made and imaged by the SPI system at different incident polarization angles (IPA) with different mechanical loads on the tendon. The micro and partial-thickness tendon tears were detected by the DOLP images due to weak birefringence around the tears. The tendon tears were detected by a highest DOLP contrast at longest visible wavelength (Red, 650 ${\pm}$ 50 nm). All polarized images showed modulated DOLP as the incident polarization angle (IPA) was varied. The varying DOLP allowed the optimal detection of the micro and partial-thickness tendon tears at a certain IPA. The SPI system with variable IPA and spectral information can improve the detection of the tendon tears by higher visibility of fiber orientations, and thereby improve diagnosis and treatment of the tendon related injuries.

• Composites Research
• /
• 제29권6호
• /
• pp.369-374
• /
• 2016

본 연구에서는 굽힘-비틀림 커플링(bend-twist coupled, BTC) 설계개념을 적용한 10 MW급 복합재 풍력 블레이드의 구조 최적 설계를 수행하였다. BTC 설계개념은 동적 하중 상황에서 블레이드의 굽힘과 비틀림 거동 사이의 연동을 유도하여, 단면 받음각 변화에 의한 수동적인 적응 하중저감이 가능하다. 인자연구를 통해 최적의 BTC 설계인자를 추출하여 블레이드 구조설계에 적용하였다. BTC 개념이 동적 하중 감소에 미치는 영향을 가늠하기 위해 블레이드 루트 부에서의 피로등가하중을 계산한 결과, BTC 개념이 적용된 블레이드를 적용한 경우 피로등가하중이 2-3% 정도 감소하는 것을 확인할 수 있었다. BTC 효과를 시험적으로 검증하기 위해 1:29 비율의 블레이드 stiffener 축소모델을 제작하였으며, 정하중 시험을 통해 처짐 거동 시 끝단에서의 비틀림을 측정하였다.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.205-224
• /
• 2015

A novel hydrophilic poly (vinylidene fluoride)/poly (p-phenylene terephthalamide) (PVDF/PPTA) blend membrane was prepared by in situ polycondensation of p-phenylene diamine (PPD) and terephthaloyl chloride (TPC) in PVDF solution with subsequent nonsolvent induced phase separation (NIPS) process. For comparison, conventional solution blend membrane was prepared directly by adding PVDF powder into PPTA polycondensation solution. Blend membranes were characterized by means of viscometry, X-ray photoelectron spectroscopy (XPS), Field Emission Scanning Electron Microscopy (FESEM). The effects of different blending methods on membrane performance including water contact angle (WCA), mechanical strength, anti-fouling and anti-compression properties were investigated and compared. Stronger interactions between PVDF and PPTA in in situ blend membranes were verified by viscosity and XPS analysis. The incorporation of PPTA accelerated the demixing rate and caused the formation of a more porous structure in blend membranes. In situ blend membranes exhibited better hydrophilicity and higher tensile strength. The optimal values of WCA and tensile strength were $65^{\circ}$ and 34.1 MPa, which were reduced by 26.1% and increased by 26.3% compared with pure PVDF membrane. Additionally, antifouling properties of in situ blend membranes were greatly improved than pure PVDF membrane with an increasing of flux recovery ratio by 25%. Excellent anti-compression properties were obtained in in situ blend membranes with a stable pore morphology. The correlations among membrane formation mechanism, structure and performance were also discussed.